Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1404471
| From | Ian Abbott <abbotti@mev.co.uk> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 08/20] staging: comedi: drivers: re-do PLX PCI 9080 LBRDx register values |
| Date | 2016-05-20 16:00 +0200 |
| Message-ID | <rAT87-6ck-47@gated-at.bofh.it> (permalink) |
| References | <rASYp-68P-19@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Replace the existing macros in "plx9080.h" that define values for the
LBRD0 and LBRD1 registers. Use the prefix `PLX_LBRD_` for macros that
apply to both registers, `PLX_LBRD0_` for macros that apply only to the
LBRD0 register, and `PLX_LBRD1_` for macros that apply only to the LBRD1
register. Make use of the `BIT(x)` and `GENMASK(h,l)` macros to define
the values.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/plx9080.h | 80 ++++++++++++++++++++++----------
1 file changed, 56 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 84dd366..93b2e89 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -159,30 +159,62 @@ struct plx_dma_desc {
/* Local Address Space 1 Bus Region Descriptor Register */
#define PLX_REG_LBRD1 0x00f8
-#define RGN_WIDTH 0x00000002 /* Local bus width bits */
-#define RGN_8BITS 0x00000000 /* 08 bit Local Bus */
-#define RGN_16BITS 0x00000001 /* 16 bit Local Bus */
-#define RGN_32BITS 0x00000002 /* 32 bit Local Bus */
-#define RGN_MWS 0x0000003C /* Memory Access Wait States */
-#define RGN_0MWS 0x00000000
-#define RGN_1MWS 0x00000004
-#define RGN_2MWS 0x00000008
-#define RGN_3MWS 0x0000000C
-#define RGN_4MWS 0x00000010
-#define RGN_6MWS 0x00000018
-#define RGN_8MWS 0x00000020
-#define RGN_MRE 0x00000040 /* Memory Space Ready Input Enable */
-#define RGN_MBE 0x00000080 /* Memory Space Bterm Input Enable */
-#define RGN_READ_PREFETCH_DISABLE 0x00000100
-#define RGN_ROM_PREFETCH_DISABLE 0x00000200
-#define RGN_READ_PREFETCH_COUNT_ENABLE 0x00000400
-#define RGN_RWS 0x003C0000 /* Expn ROM Wait States */
-#define RGN_RRE 0x00400000 /* ROM Space Ready Input Enable */
-#define RGN_RBE 0x00800000 /* ROM Space Bterm Input Enable */
-#define RGN_MBEN 0x01000000 /* Memory Space Burst Enable */
-#define RGN_RBEN 0x04000000 /* ROM Space Burst Enable */
-#define RGN_THROT 0x08000000 /* De-assert TRDY when FIFO full */
-#define RGN_TRD 0xF0000000 /* Target Ready Delay /8 */
+/* Memory Space Local Bus Width */
+#define PLX_LBRD_MSWIDTH8 (BIT(0) * 0) /* 8 bits wide */
+#define PLX_LBRD_MSWIDTH16 (BIT(0) * 1) /* 16 bits wide */
+#define PLX_LBRD_MSWIDTH32 (BIT(0) * 2) /* 32 bits wide */
+#define PLX_LBRD_MSWIDTH32A (BIT(0) * 3) /* 32 bits wide */
+#define PLX_LBRD_MSWIDTH_MASK GENMASK(1, 0)
+#define PLX_LBRD_MSWIDTH_SHIFT 0
+/* Memory Space Internal Wait States */
+#define PLX_LBRD_MSIWS(x) (BIT(2) * ((x) & 0xf))
+#define PLX_LBRD_MSIWS_MASK GENMASK(5, 2)
+#define PLX_LBRD_MSIWS_SHIFT 2
+/* Memory Space Ready Input Enable */
+#define PLX_LBRD_MSREADYIEN BIT(6)
+/* Memory Space BTERM# Input Enable */
+#define PLX_LBRD_MSBTERMIEN BIT(7)
+/* Memory Space 0 Prefetch Disable (LBRD0 only) */
+#define PLX_LBRD0_MSPREDIS BIT(8)
+/* Memory Space 1 Burst Enable (LBRD1 only) */
+#define PLX_LBRD1_MSBURSTEN BIT(8)
+/* Expansion ROM Space Prefetch Disable (LBRD0 only) */
+#define PLX_LBRD0_EROMPREDIS BIT(9)
+/* Memory Space 1 Prefetch Disable (LBRD1 only) */
+#define PLX_LBRD1_MSPREDIS BIT(9)
+/* Read Prefetch Count Enable */
+#define PLX_LBRD_RPFCOUNTEN BIT(10)
+/* Prefetch Counter */
+#define PLX_LBRD_PFCOUNT(x) (BIT(11) * ((x) & 0xf))
+#define PLX_LBRD_PFCOUNT_MASK GENMASK(14, 11)
+#define PLX_LBRD_PFCOUNT_SHIFT 11
+/* Expansion ROM Space Local Bus Width (LBRD0 only) */
+#define PLX_LBRD0_EROMWIDTH8 (BIT(16) * 0) /* 8 bits wide */
+#define PLX_LBRD0_EROMWIDTH16 (BIT(16) * 1) /* 16 bits wide */
+#define PLX_LBRD0_EROMWIDTH32 (BIT(16) * 2) /* 32 bits wide */
+#define PLX_LBRD0_EROMWIDTH32A (BIT(16) * 3) /* 32 bits wide */
+#define PLX_LBRD0_EROMWIDTH_MASK GENMASK(17, 16)
+#define PLX_LBRD0_EROMWIDTH_SHIFT 16
+/* Expansion ROM Space Internal Wait States (LBRD0 only) */
+#define PLX_LBRD0_EROMIWS(x) (BIT(18) * ((x) & 0xf))
+#define PLX_LBRD0_EROMIWS_MASK GENMASK(21, 18)
+#define PLX_LBRD0_EROMIWS_SHIFT 18
+/* Expansion ROM Space Ready Input Enable (LBDR0 only) */
+#define PLX_LBRD0_EROMREADYIEN BIT(22)
+/* Expansion ROM Space BTERM# Input Enable (LBRD0 only) */
+#define PLX_LBRD0_EROMBTERMIEN BIT(23)
+/* Memory Space 0 Burst Enable (LBRD0 only) */
+#define PLX_LBRD0_MSBURSTEN BIT(24)
+/* Extra Long Load From Serial EEPROM (LBRD0 only) */
+#define PLX_LBRD0_EELONGLOAD BIT(25)
+/* Expansion ROM Space Burst Enable (LBRD0 only) */
+#define PLX_LBRD0_EROMBURSTEN BIT(26)
+/* Direct Slave PCI Write Mode - assert TRDY# when FIFO full (LBRD0 only) */
+#define PLX_LBRD0_DSWMTRDY BIT(27)
+/* PCI Target Retry Delay Clocks / 8 (LBRD0 only) */
+#define PLX_LBRD0_TRDELAY(x) (BIT(28) * ((x) & 0xF))
+#define PLX_LBRD0_TRDELAY_MASK GENMASK(31, 28)
+#define PLX_LBRD0_TRDELAY_SHIFT 28
/* Local Range Register for Direct Master to PCI */
#define PLX_REG_DMRR 0x001c
--
2.8.1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/20] staging: comedi: re-do drivers/plx9080.h Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 15:50 +0200
[PATCH 20/20] staging: comedi: plx9080.h: include headers for declarations Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 16/20] staging: comedi: drivers: re-do PLX PCI 9080 DMACSRx register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 14/20] staging: comedi: drivers: re-do PLX PCI 9080 DMAMODEx register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 18/20] staging: comedi: plx9080.h: tidy up some comments Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 15/20] staging: comedi: drivers: re-do PLX PCI 9080 DMADPRx register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 13/20] staging: comedi: plx9080.h: add hard-coded PCIHIDR register value Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 01/20] staging: comedi: plx9080.h: correct LRNG_IO_MASK and LMAP_IO_MASK Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 09/20] staging: comedi: drivers: re-do PLX PCI 9080 DMPBAM register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 07/20] staging: comedi: drivers: re-do PLX PCI 9080 BIGEND register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 06/20] staging: comedi: drivers: re-do PLX PCI 9080 MARBR register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 05/20] staging: comedi: drivers: re-do macros for PLX PCI 9080 LASxBA values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 19/20] staging: comedi: plx9080.h: Add kerneldoc comments Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 12/20] staging: comedi: drivers: re-do PLX PCI 9080 CNTRL register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 10/20] staging: comedi: drivers: re-do PLX PCI 9080 DMCFGA register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 11/20] staging: comedi: drivers: re-do PLX PCI 9080 INTCSR register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 17/20] staging: comedi: drivers: add PLX PCI 9080 DMATHR register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 08/20] staging: comedi: drivers: re-do PLX PCI 9080 LBRDx register values Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
[PATCH 03/20] staging: comedi: drivers: rename PLX PCI 9080 register offsets Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 16:00 +0200
RE: [PATCH 03/20] staging: comedi: drivers: rename PLX PCI 9080 register offsets Hartley Sweeten <HartleyS@visionengravers.com> - 2016-05-20 18:30 +0200
Re: [PATCH 03/20] staging: comedi: drivers: rename PLX PCI 9080 register offsets Ian Abbott <abbotti@mev.co.uk> - 2016-05-20 18:40 +0200
RE: [PATCH 03/20] staging: comedi: drivers: rename PLX PCI 9080 register offsets Hartley Sweeten <HartleyS@visionengravers.com> - 2016-05-20 19:00 +0200
csiph-web