Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1349600

Re: [PATCH] KVM: x86: disable PEBS before a guest entry

Show all headers | View raw

On Thu, Mar 3, 2016 at 10:53 AM, Radim Krčmář <rkrcmar@redhat.com> wrote:
> Linux guests on Haswell (and also SandyBridge and Broadwell, at least)
> would crash if you decided to run a host command that uses PEBS, like
>   perf record -e 'cpu/mem-stores/pp' -a
>
> This happens because KVM is using VMX MSR switching to disable PEBS, but
> SDM [2015-12] 18.4.4.4 Re-configuring PEBS Facilities explains why it
> isn't safe:
>   When software needs to reconfigure PEBS facilities, it should allow a
>   quiescent period between stopping the prior event counting and setting
>   up a new PEBS event. The quiescent period is to allow any latent
>   residual PEBS records to complete its capture at their previously
>   specified buffer address (provided by IA32_DS_AREA).
>
> There might not be a quiescent period after the MSR switch, so a CPU
> ends up using host's MSR_IA32_DS_AREA to access an area in guest's
> memory.  (Or MSR switching is just buggy on some models.)
>
> The guest can learn something about the host this way:
> If the guest doesn't map address pointed by MSR_IA32_DS_AREA, it results
> in #PF where we leak host's MSR_IA32_DS_AREA through CR2.
>
> After that, a malicious guest can map and configure memory where
> MSR_IA32_DS_AREA is pointing and can therefore get an output from
> host's tracing.
>
> This is not a critical leak as the host must initiate with PEBS tracing
> and I have not been able to get a record from more than one instruction
> before vmentry in vmx_vcpu_run() (that place has most registers already
> overwritten with guest's).
>
> We could disable PEBS just few instructions before vmentry, but
> disabling it earlier shouldn't affect host tracing too much.
> We also don't need to switch MSR_IA32_PEBS_ENABLE on VMENTRY, but that
> optimization isn't worth its code, IMO.
>
> (If you are implementing PEBS for guests, be sure to handle the case
>  where both host and guest enable PEBS, because this patch doesn't.)
>
> Fixes: 26a4f3c08de4 ("perf/x86: disable PEBS on a guest entry.")
> Cc: <stable@vger.kernel.org>
> Reported-by: Jiří Olša <jolsa@redhat.com>
> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
> ---
>  arch/x86/kvm/vmx.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 46154dac71e6..946582f4f105 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -1767,6 +1767,13 @@ static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
>                         return;
>                 }
>                 break;
> +       case MSR_IA32_PEBS_ENABLE:
> +               /* PEBS needs a quiescent period after being disabled (to write
> +                * a record).  Disabling PEBS through VMX MSR swapping doesn't
> +                * provide that period, so a CPU could write host's record into
> +                * guest's memory.
> +                */
> +               wrmsrl(MSR_IA32_PEBS_ENABLE, 0);

Should this go in add_atomic_switch_msr instead of clear_atomic_switch_msr?

>         }
>
>         for (i = 0; i < m->nr; ++i)
> --
> 2.7.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] KVM: x86: disable PEBS before a guest entry Radim Krčmář <rkrcmar@redhat.com> - 2016-03-03 20:00 +0100
  Re: [PATCH] KVM: x86: disable PEBS before a guest entry David Matlack <dmatlack@google.com> - 2016-03-03 22:40 +0100
    Re: [PATCH] KVM: x86: disable PEBS before a guest entry Radim Krčmář <rkrcmar@redhat.com> - 2016-03-04 14:30 +0100

csiph-web