Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1276921

Re: [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver

From Rob Herring <robh@kernel.org>
Newsgroups linux.kernel
Subject Re: [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
Date 2015-11-25 01:10 +0100
Message-ID <qyvOO-6PM-15@gated-at.bofh.it> (permalink)
References <qylFL-9v-1@gated-at.bofh.it> <qylFM-9v-39@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Tue, Nov 24, 2015 at 01:14:17PM +0000, Lee Jones wrote:
> Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  .../devicetree/bindings/remoteproc/st-rproc.txt    | 41 ++++++++++++++++++++++

Acked-by: Rob Herring <robh@kernel.org>

>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> new file mode 100644
> index 0000000..1031bcd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
> @@ -0,0 +1,41 @@
> +STMicroelectronics Co-Processor Bindings
> +----------------------------------------
> +
> +This binding provides support for adjunct processors found on ST SoCs.
> +
> +Co-processors can be controlled from the bootloader or the primary OS. If
> +the bootloader starts a co-processor, the primary OS must detect its state
> +and act accordingly.
> +
> +Required properties:
> +- compatible		Should be one of:
> +				"st,st231-rproc"
> +				"st,st40-rproc"
> +- memory-region		Reserved memory (See: ../reserved-memory/reserved-memory.txt)
> +- resets		Reset lines (See: ../reset/reset.txt)
> +- reset-names		Must be "sw_reset" and "pwr_reset"
> +- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
> +- clock-frequency	Clock frequency to set co-processor at if the bootloader
> +			hasn't already done so
> +- st,syscfg		System configuration register which holds the boot vector
> +			for the co-processor
> +				1st cell: Phandle to syscon block
> +				2nd cell: Boot vector register offset
> +
> +Example:
> +
> +	audio_reserved: rproc@42000000 {
> +		compatible = "shared-dma-pool";
> +		reg = <0x42000000 0x01000000>;
> +		no-map;
> +	};
> +
> +	st231-audio {
> +		compatible	= "st,st231-rproc";
> +		memory-region	= <&audio_reserved>;
> +		resets		= <&softreset STIH407_ST231_AUD_SOFTRESET>;
> +		reset-names	= "sw_reset";
> +		clocks		= <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
> +		clock-frequency	= <600000000>;
> +		st,syscfg	= <&syscfg_core 0x228>;
> +	};
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
  [RESEND v4 5/6] ARM: STiH407: Add nodes for RemoteProc Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
  [RESEND v4 6/6] ARM: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
  [RESEND v4 4/6] MAINTAINERS: Add ST's Remote Processor Driver to ARM/STI ARCHITECTURE Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
  [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
    Re: [RESEND v4 1/6] remoteproc: dt: Provide bindings for ST's Remote  Processor Controller driver Rob Herring <robh@kernel.org> - 2015-11-25 01:10 +0100
  [RESEND v4 3/6] remoteproc: Supply controller driver for ST's Remote Processors Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
  [RESEND v4 2/6] remoteproc: debugfs: Add ability to boot remote processor using debugfs Lee Jones <lee.jones@linaro.org> - 2015-11-24 14:20 +0100
    Re: [RESEND v4 2/6] remoteproc: debugfs: Add ability to boot remote  processor using debugfs Bjorn Andersson <bjorn@kryo.se> - 2015-11-27 18:10 +0100
  Re: [RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Ohad Ben-Cohen <ohad@wizery.com> - 2015-11-26 09:50 +0100
    Re: [RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics  platforms Lee Jones <lee.jones@linaro.org> - 2015-11-26 10:20 +0100
      Re: [RESEND v4 0/6] remoteproc: Add driver for STMicroelectronics platforms Ohad Ben-Cohen <ohad@wizery.com> - 2015-11-26 10:40 +0100

csiph-web