Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1277142

Re: [PATCH 2/5] Documentation: devicetree: Add property for controlling power saving mode for the us5182 als sensor

Show all headers | View raw

On 25.11.2015 02:01, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 12:59:49PM +0200, Adriana Reus wrote:
>> Add a property to allow changing the default power-saving mode.
>> By default, at read raw the chip will activate and provide
>> one measurent, then it will shut itself down. However, the
>> chip can also work in "continuous" mode which may be more reliable
>> but is also more power consuming.
>>
>> Signed-off-by: Adriana Reus <adriana.reus@intel.com>
>> ---
>>   Documentation/devicetree/bindings/iio/light/us5182d.txt | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
>> index 6f0a530..a619799 100644
>> --- a/Documentation/devicetree/bindings/iio/light/us5182d.txt
>> +++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
>> @@ -7,13 +7,24 @@ Required properties:
>>   Optional properties:
>>   - upisemi,glass-coef: glass attenuation factor - compensation factor of
>>                         resolution 1000 for material transmittance.
>> +
>>   - upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
>>                       counts) corresponding to every scale.
>> +
>>   - upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
>>                              fractional bits - Q4.4) applied when light > threshold
>> +
>>   - upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
>>                              fractional bits - Q4.4) applied when light < threshold
>>
>> +- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
>> +                      measurement and then shuts itself down) and continuous (
>> +                      chip takes continuous measurements). The one-shot mode is
>> +                      more power-friendly but the continuous mode may be more
>> +                      reliable. If this property is specified the continuous
>> +                      mode will be used instead of the default one-shot one for
>> +                      raw reads.
>
> I could imagine an OS may want to decide this on its own or use a
> mixture of the modes.
>
> Rob
>

There is no possibility of mixing them up (at the same time), so for 
example proximity cannot work in one mode and als the other.

The one-shot mode can only be used for raw reads (for example when 
user-space polls in_[proximity|light]_raw). If user-space wants to 
enable events (activate interrupts when certain thresholds are met - 
patch 5 of the series), then the chip has to switch to continuous 
nonetheless because it needs to be active all the time. So one work-flow 
scenario would be:

Consumer1 starts polling the raw interface - default_mode
Consumer2 activates events - continuous mode
Consumer2 deactivates events - back to default_mode

The only choice here is the default mode for raw reads, it currently is
one-shot, this patch allows for continuous to be used if preferred.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/5] iio: light: us5281d: Add power managmenet and interrupt support Adriana Reus <adriana.reus@intel.com> - 2015-11-24 12:10 +0100
  [PATCH 4/5] iio: light: us8152d: Add power management support Adriana Reus <adriana.reus@intel.com> - 2015-11-24 12:10 +0100
    Re: [PATCH 4/5] iio: light: us8152d: Add power management support Jonathan Cameron <jic23@kernel.org> - 2015-11-29 16:10 +0100
  [PATCH 2/5] Documentation: devicetree: Add property for controlling power saving mode for the us5182 als sensor Adriana Reus <adriana.reus@intel.com> - 2015-11-24 12:10 +0100
    Re: [PATCH 2/5] Documentation: devicetree: Add property for  controlling power saving mode for the us5182 als sensor Rob Herring <robh@kernel.org> - 2015-11-25 01:10 +0100
      Re: [PATCH 2/5] Documentation: devicetree: Add property for  controlling power saving mode for the us5182 als sensor Adriana Reus <adriana.reus@intel.com> - 2015-11-25 11:00 +0100
        Re: [PATCH 2/5] Documentation: devicetree: Add property for  controlling power saving mode for the us5182 als sensor Rob Herring <robh@kernel.org> - 2015-11-26 01:00 +0100
          Re: [PATCH 2/5] Documentation: devicetree: Add property for  controlling power saving mode for the us5182 als sensor Jonathan Cameron <jic23@kernel.org> - 2015-11-29 15:40 +0100
  [PATCH 1/5] iio: light: us5182d: Add property for choosing default power mode Adriana Reus <adriana.reus@intel.com> - 2015-11-24 12:10 +0100
    Re: [PATCH 1/5] iio: light: us5182d: Add property for choosing  default power mode Jonathan Cameron <jic23@kernel.org> - 2015-11-29 15:40 +0100

csiph-web