Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1268688

Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250

Show all headers | View raw

2015-11-12 16:35 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
> On 11/12/2015 07:34 AM, Matwey V. Kornilov wrote:
>> 2015-11-10 19:12 GMT+03:00 Peter Hurley <peter@hurleysoftware.com>:
>>> On 11/07/2015 05:09 AM, Matwey V. Kornilov wrote:
>>>> Implementation of software emulation of RS485 direction handling is based
>>>> on omap-serial driver.  It is acts as the following. At transmission start,
>>>> RTS is set (if required) and receiver is off (if required). At transmission
>>>> stop, RTS is set (if required) and fifo is flushed.
>>>>
>>>> Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
>>>> ---
>>>>  drivers/tty/serial/8250/8250_port.c | 32 ++++++++++++++++++++++++++++++++
>>>>  1 file changed, 32 insertions(+)
>>>>
>>>> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
>>>> index 52d82d2..a9291f7 100644
>>>> --- a/drivers/tty/serial/8250/8250_port.c
>>>> +++ b/drivers/tty/serial/8250/8250_port.c
>>>> @@ -559,7 +559,37 @@ static void serial8250_rpm_put_tx(struct uart_8250_port *p)
>>>>       pm_runtime_mark_last_busy(p->port.dev);
>>>>       pm_runtime_put_autosuspend(p->port.dev);
>>>>  }
>>>> +static void serial8250_stop_rx(struct uart_port *port);
>>>> +static void serial8250_rs485_start_tx(struct uart_8250_port *p)
>>>> +{
>>>> +     if (p->capabilities & UART_CAP_HW485 || !(p->port.rs485.flags & SER_RS485_ENABLED))
>>>> +             return;
>>>> +
>>>> +     if (p->port.rs485.flags & SER_RS485_RTS_ON_SEND) {
>>>> +             serial_port_out(&p->port, UART_MCR, UART_MCR_RTS);
>>>
>>> The SER_RS485_RTS_ON_SEND bit is supposed to be the logic level of RTS,
>>> so RTS should be driven to either 0 or 1 here (not just to 1).
>>
>> By the way, I've found that p->mcr caches MCR inconsistently. Is it
>> supposed to be so? Or p->mcr is not for caching?
>
> Not for caching; it's for modal settings (eg., AFE) that the 8250 port
> driver needs to merge in when changing mctrl bits (DTR/RTS/etc).
>
> The serial core caches the mctrl bits in uart_port->mctrl, but IMO
> it would be simpler to always set/clear RTS here (rather than like
> the omap-serial driver where it checks the gpio value first).
>
> Is the assumption that userspace will not perform conflicting
> operations, such as ioctl(TIOCMSET) or ioctl(TCSETSx), with RS485 enabled?

I've sent v3 series and put all RTS related stuff into separate
functions. Could you please continue this discussion in "v3 5/5"?
TIOCMGET should work correctly now, because it reads register. I am
not sure that TIOCMSET should be limited somehow, user knows better
what he wants.

> Regards,
> Peter Hurley
>



-- 
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119991, Moscow, Universitetsky pr-k 13, +7 (495) 9392382
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-07 11:20 +0100
  Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-07 17:10 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-08 12:00 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 15:50 +0100
        Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-09 16:50 +0100
          Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 22:40 +0100
            Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-09 22:50 +0100
              Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 23:10 +0100
                Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-10 12:40 +0100
  Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-10 17:20 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-10 17:30 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-10 18:00 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-12 13:40 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-12 14:40 +0100
        Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-13 09:40 +0100

csiph-web