Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1264799

[PATCH v2 3/3] tty: Add software emulated RS485 support for 8250

From "Matwey V. Kornilov" <matwey@sai.msu.ru>
Newsgroups linux.kernel
Subject [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250
Date 2015-11-07 11:20 +0100
Message-ID <qs8Lf-XB-9@gated-at.bofh.it> (permalink)
References <qs8Lf-XB-5@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

Implementation of software emulation of RS485 direction handling is based
on omap-serial driver.  It is acts as the following. At transmission start,
RTS is set (if required) and receiver is off (if required). At transmission
stop, RTS is set (if required) and fifo is flushed.

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
---
 drivers/tty/serial/8250/8250_port.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 52d82d2..a9291f7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -559,7 +559,37 @@ static void serial8250_rpm_put_tx(struct uart_8250_port *p)
 	pm_runtime_mark_last_busy(p->port.dev);
 	pm_runtime_put_autosuspend(p->port.dev);
 }
+static void serial8250_stop_rx(struct uart_port *port);
+static void serial8250_rs485_start_tx(struct uart_8250_port *p)
+{
+	if (p->capabilities & UART_CAP_HW485 || !(p->port.rs485.flags & SER_RS485_ENABLED))
+		return;
+
+	if (p->port.rs485.flags & SER_RS485_RTS_ON_SEND) {
+		serial_port_out(&p->port, UART_MCR, UART_MCR_RTS);
+		if (p->port.rs485.delay_rts_before_send > 0)
+			mdelay(p->port.rs485.delay_rts_before_send);
+	}
+	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX))
+		serial8250_stop_rx(&p->port);
+}
+static void serial8250_rs485_stop_tx(struct uart_8250_port *p)
+{
+	if (p->capabilities & UART_CAP_HW485 || !(p->port.rs485.flags & SER_RS485_ENABLED))
+		return;
 
+	if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) {
+		if (p->port.rs485.delay_rts_after_send > 0)
+			mdelay(p->port.rs485.delay_rts_after_send);
+		serial_port_out(&p->port, UART_MCR, UART_MCR_RTS);
+	}
+	/*
+	* Empty the RX FIFO, we are not interested in anything
+	* received during the half-duplex transmission.
+	*/
+	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX))
+		serial8250_clear_fifos(p);
+}
 /*
  * IER sleep support.  UARTs which have EFRs need the "extended
  * capability" bit enabled.  Note that on XR16C850s, we need to
@@ -1309,6 +1339,7 @@ static void serial8250_stop_tx(struct uart_port *port)
 		up->acr |= UART_ACR_TXDIS;
 		serial_icr_write(up, UART_ACR, up->acr);
 	}
+	serial8250_rs485_stop_tx(up);
 	serial8250_rpm_put(up);
 }
 
@@ -1317,6 +1348,7 @@ static void serial8250_start_tx(struct uart_port *port)
 	struct uart_8250_port *up = up_to_u8250p(port);
 
 	serial8250_rpm_get_tx(up);
+	serial8250_rs485_start_tx(up);
 
 	if (up->dma && !up->dma->tx_dma(up))
 		return;
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-07 11:20 +0100
  Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-07 17:10 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-08 12:00 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 15:50 +0100
        Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-09 16:50 +0100
          Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 22:40 +0100
            Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-09 22:50 +0100
              Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-09 23:10 +0100
                Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-10 12:40 +0100
  Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-10 17:20 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-10 17:30 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-10 18:00 +0100
    Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-12 13:40 +0100
      Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 Peter Hurley <peter@hurleysoftware.com> - 2015-11-12 14:40 +0100
        Re: [PATCH v2 3/3] tty: Add software emulated RS485 support for 8250 "Matwey V. Kornilov" <matwey@sai.msu.ru> - 2015-11-13 09:40 +0100

csiph-web