Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1267133
| From | Sreekanth Reddy <sreekanth.reddy@avagotech.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH RESEND 07/25] mpt2sas, mpt3sas : Removed SCSI_MPTXSAS_LOGGING entry from Kconfig |
| Date | 2015-11-11 13:10 +0100 |
| Message-ID | <qtCnV-2Ba-31@gated-at.bofh.it> (permalink) |
| References | <qtCnT-2Ba-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
From: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
Currently there is a logging level option provided for user for each of our
drivers in the kernel configuration utility. They can enable this option to
get more verbose information. By default this is enabled.
When this option is enabled then those functions which displays the
required information will also get compiled otherwise these functions
won't be included in the compilation code and so won't get compiled.
Now as we are merging the both the driver code, so now we can't
provide these option to the user. So removing SCSI_MPTXSAS_LOGGING
entry from Kconfig files and completely enable this logging option
(by removing the #ifdef CONFIG_SCSI_MPT3SAS_LOGGING preprocessor
check conditions), so that all the functions which are defined to
display more verbos will also get compiled.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
---
drivers/scsi/mpt2sas/Kconfig | 6 ------
drivers/scsi/mpt3sas/Kconfig | 6 ------
drivers/scsi/mpt3sas/mpt3sas_base.c | 10 ++++-----
drivers/scsi/mpt3sas/mpt3sas_config.c | 6 ------
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 10 +--------
drivers/scsi/mpt3sas/mpt3sas_debug.h | 16 +-------------
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 39 ++++-------------------------------
7 files changed, 10 insertions(+), 83 deletions(-)
diff --git a/drivers/scsi/mpt2sas/Kconfig b/drivers/scsi/mpt2sas/Kconfig
index 657b45c..1356a0a 100644
--- a/drivers/scsi/mpt2sas/Kconfig
+++ b/drivers/scsi/mpt2sas/Kconfig
@@ -59,9 +59,3 @@ config SCSI_MPT2SAS_MAX_SGE
SAFE_PHYS_SEGMENTS. However, it may decreased down to 16.
Decreasing this parameter will reduce memory requirements
on a per controller instance.
-
-config SCSI_MPT2SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
- depends on PCI && SCSI && SCSI_MPT2SAS
- ---help---
- This turns on a logging facility.
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index 4d235dd..18b64bc 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -59,9 +59,3 @@ config SCSI_MPT3SAS_MAX_SGE
MAX_PHYS_SEGMENTS in most kernels. However in SuSE kernels this
can be 256. However, it may decreased down to 16. Decreasing this
parameter will reduce memory requirements on a per controller instance.
-
-config SCSI_MPT3SAS_LOGGING
- bool "LSI MPT Fusion logging facility"
- depends on PCI && SCSI && SCSI_MPT3SAS
- ---help---
- This turns on a logging facility.
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 8a7f93e..31d0ca8 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -324,7 +324,6 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
panic("panic in %s\n", __func__);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
* @ioc: per adapter object
@@ -630,7 +629,6 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
}
-#endif
/**
* _base_sas_log_info - verbose translation of firmware log info
@@ -710,13 +708,13 @@ _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return;
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
(ioc->logging_level & MPT_DEBUG_REPLY)) {
_base_sas_ioc_info(ioc , mpi_reply,
mpt3sas_base_get_msg_frame(ioc, smid));
}
-#endif
+
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
_base_sas_log_info(ioc, loginfo);
@@ -783,9 +781,9 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
return 1;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
_base_display_event_data(ioc, mpi_reply);
-#endif
+
if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
goto out;
smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index e45c461..53eb701 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -83,7 +83,6 @@ struct config_request {
dma_addr_t page_dma;
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _config_display_some_debug - debug routine
* @ioc: per adapter object
@@ -173,7 +172,6 @@ _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
}
-#endif
/**
* _config_alloc_config_dma_memory - obtain physical memory
@@ -255,9 +253,7 @@ mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
mpi_reply->MsgLength*4);
}
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
-#endif
ioc->config_cmds.smid = USHRT_MAX;
complete(&ioc->config_cmds.done);
return 1;
@@ -387,9 +383,7 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->config_cmds.smid = smid;
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_config_display_some_debug(ioc, smid, "config_request", NULL);
-#endif
init_completion(&ioc->config_cmds.done);
mpt3sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 8b46cbf..5c08d31 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -78,7 +78,6 @@ enum block_state {
BLOCKING,
};
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _ctl_sas_device_find_by_handle - sas device search
* @ioc: per adapter object
@@ -254,8 +253,6 @@ _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
}
}
-#endif
-
/**
* mpt3sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
@@ -302,9 +299,7 @@ mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
}
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
-#endif
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
return 1;
@@ -759,9 +754,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
psge = (void *)request + (karg.data_sge_offset*4);
/* send command to firmware */
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
-#endif
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
@@ -916,7 +909,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
Mpi2SCSITaskManagementReply_t *tm_reply =
@@ -929,7 +921,7 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
le32_to_cpu(tm_reply->IOCLogInfo),
le32_to_cpu(tm_reply->TerminationCount));
}
-#endif
+
/* copy out xdata to user */
if (data_in_sz) {
if (copy_to_user(karg.data_in_buf_ptr, data_in,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_debug.h b/drivers/scsi/mpt3sas/mpt3sas_debug.h
index 4e8a63f..cceeb2c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_debug.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_debug.h
@@ -68,20 +68,11 @@
#define MPT_DEBUG_TRIGGER_DIAG 0x00200000
-/*
- * CONFIG_SCSI_MPT3SAS_LOGGING - enabled in Kconfig
- */
-
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
#define MPT_CHECK_LOGGING(IOC, CMD, BITS) \
{ \
if (IOC->logging_level & BITS) \
CMD; \
}
-#else
-#define MPT_CHECK_LOGGING(IOC, CMD, BITS)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
-
/*
* debug macros
@@ -153,7 +144,7 @@
/* inline functions for dumping debug data*/
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
/**
* _debug_dump_mf - print message frame contents
* @mpi_request: pointer to message frame
@@ -211,10 +202,5 @@ _debug_dump_config(void *mpi_request, int sz)
}
pr_info("\n");
}
-#else
-#define _debug_dump_mf(mpi_request, sz)
-#define _debug_dump_reply(mpi_request, sz)
-#define _debug_dump_config(mpi_request, sz)
-#endif /* CONFIG_SCSI_MPT3SAS_LOGGING */
#endif /* MPT3SAS_DEBUG_H_INCLUDED */
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 233627d..a638920 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3624,10 +3624,8 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
u16 smid;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_SCSI)
scsi_print_command(scmd);
-#endif
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
@@ -3758,7 +3756,6 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
* @ioc: per adapter object
@@ -3971,7 +3968,6 @@ _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
_scsih_response_code(ioc, response_bytes[0]);
}
}
-#endif
/**
* _scsih_turn_on_pfa_led - illuminate PFA LED
@@ -4239,13 +4235,11 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
le16_to_cpu(mpi_reply->DevHandle));
mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (!(ioc->logging_level & MPT_DEBUG_REPLY) &&
((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
(scmd->sense_buffer[2] == MEDIUM_ERROR) ||
(scmd->sense_buffer[2] == HARDWARE_ERROR)))
_scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
-#endif
}
switch (ioc_status) {
case MPI2_IOCSTATUS_BUSY:
@@ -4352,10 +4346,8 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
_scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
-#endif
out:
@@ -5152,7 +5144,6 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
kfree(sas_device);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_topology_change_event_debug - debug for topology event
* @ioc: per adapter object
@@ -5230,7 +5221,6 @@ _scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
}
}
-#endif
/**
* _scsih_sas_topology_change_event - handle topology changes
@@ -5255,10 +5245,8 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
(Mpi2EventDataSasTopologyChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_topology_change_event_debug(ioc, event_data);
-#endif
if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
return 0;
@@ -5364,7 +5352,6 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
return 0;
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_device_status_change_event_debug - debug for device event
* @event_data: event data payload
@@ -5432,7 +5419,6 @@ _scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
event_data->ASC, event_data->ASCQ);
pr_info("\n");
}
-#endif
/**
* _scsih_sas_device_status_change_event - handle device status change
@@ -5454,11 +5440,9 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
(Mpi2EventDataSasDeviceStatusChange_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_device_status_change_event_debug(ioc,
event_data);
-#endif
/* In MPI Revision K (0xC), the internal device reset complete was
* implemented, so avoid setting tm_busy flag for older firmware.
@@ -5496,7 +5480,6 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
* event
@@ -5531,7 +5514,6 @@ _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
(unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
le16_to_cpu(event_data->StartSlot));
}
-#endif
/**
* _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
@@ -5545,12 +5527,10 @@ static void
_scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
(Mpi2EventDataSasEnclDevStatusChange_t *)
fw_event->event_data);
-#endif
}
/**
@@ -5730,17 +5710,15 @@ _scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
Mpi2EventDataSasDiscovery_t *event_data =
(Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
- if (event_data->DiscoveryStatus)
- pr_info("discovery_status(0x%08x)",
- le32_to_cpu(event_data->DiscoveryStatus));
- pr_info("\n");
+ if (event_data->DiscoveryStatus)
+ pr_info("discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
+ pr_info("\n");
}
-#endif
if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
!ioc->sas_hba.num_phys) {
@@ -6117,7 +6095,6 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
_scsih_add_device(ioc, handle, 0, 1);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
* @ioc: per adapter object
@@ -6197,7 +6174,6 @@ _scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
element->PhysDiskNum);
}
}
-#endif
/**
* _scsih_sas_ir_config_change_event - handle ir configuration change events
@@ -6218,12 +6194,9 @@ _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
(Mpi2EventDataIrConfigChangeList_t *)
fw_event->event_data;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_config_change_event_debug(ioc, event_data);
-#endif
-
foreign_config = (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
@@ -6435,7 +6408,6 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
}
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _scsih_sas_ir_operation_status_event_debug - debug for IR op event
* @ioc: per adapter object
@@ -6477,7 +6449,6 @@ _scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
le16_to_cpu(event_data->VolDevHandle),
event_data->PercentComplete);
}
-#endif
/**
* _scsih_sas_ir_operation_status_event - handle RAID operation events
@@ -6498,11 +6469,9 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
unsigned long flags;
u16 handle;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_ir_operation_status_event_debug(ioc,
event_data);
-#endif
/* code added for raid transport support */
if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
--
2.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/25] mpt3sas: Mergering mpt2sas & mpt3sas driver code Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 07/25] mpt2sas, mpt3sas : Removed SCSI_MPTXSAS_LOGGING entry from Kconfig Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH 25/25] mpt3sas: Bump mpt3sas driver version to 09.102.00.00 Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 06/25] mpt3sas: Define 'hba_mpi_version_belonged' IOC variable Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
Re: [PATCH RESEND 06/25] mpt3sas: Define 'hba_mpi_version_belonged' IOC variable Hannes Reinecke <hare@suse.de> - 2015-11-11 14:00 +0100
[PATCH 24/25] mpt3sas: Added SCSI_MPT3SAS_MERGED config option Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 08/25] mpt3sas: For an IO, build MPI SGL LIST on GEN2 HBA's and build IEEE SGL LIST on GEN3 HBA's Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH 22/25] mpt3sas: Added a module parameter hbas_to_enumerate Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 18/25] mpt2sas, mpt3sas: Update the driver versions Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 10/25] mpt3sas: Manage MSIX vectors according to HBA device type Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 13/25] mpt3sas: Ported the providing sysfs attribute to report Backup Rail Monitor Status Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH 23/25] mpt2sas: Removed mpt2sas entries from SCSI's Kconfig and Makefile Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
[PATCH RESEND 03/25] mpt3sas: Move Gen3 HBA's device registration with PCI, SML and IOCTL related API's to a separate file Sreekanth Reddy <sreekanth.reddy@avagotech.com> - 2015-11-11 13:10 +0100
Re: [PATCH 00/25] mpt3sas: Mergering mpt2sas & mpt3sas driver code Hannes Reinecke <hare@suse.de> - 2015-11-11 14:10 +0100
Re: [PATCH 00/25] mpt3sas: Mergering mpt2sas & mpt3sas driver code "Martin K. Petersen" <martin.petersen@oracle.com> - 2015-11-12 02:20 +0100
Re: [PATCH 00/25] mpt3sas: Mergering mpt2sas & mpt3sas driver code Yinghai Lu <yinghai@kernel.org> - 2015-11-12 21:10 +0100
Re: [PATCH 00/25] mpt3sas: Mergering mpt2sas & mpt3sas driver code "Martin K. Petersen" <martin.petersen@oracle.com> - 2015-11-13 21:30 +0100
csiph-web