Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1265753

Re: [PATCH v2 2/2] gpio: zynq: Implement irq_pm_(get|put)

Show all headers | View raw

Hi Soren,

On 11/04/2015 10:16 PM, Soren Brinkmann wrote:
> The driver uses runtime PM to leverage low power techniques. For
> use-cases using GPIO as interrupt the device needs to be in an
> appropriate state.
> 
> Reported-by: John Linn <linnj@xilinx.com>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>

I've one question here. As I know, there is one code path when 
GPIO HW can be accessed before request_irq() during OF boot:

irq_create_of_mapping()
- irq_create_fwspec_mapping()
  - irq_set_irq_type()

How do you handle this situation? :(

> ---
> v2:
>   - declare callbacks static
> ---
>   drivers/gpio/gpio-zynq.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
> index 8abeacac5885..98197f778694 100644
> --- a/drivers/gpio/gpio-zynq.c
> +++ b/drivers/gpio/gpio-zynq.c
> @@ -471,6 +471,22 @@ static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on)
>   	return 0;
>   }
>   
> +static int zynq_gpio_irq_pm_get(struct irq_data *data)
> +{
> +	struct zynq_gpio *gpio = irq_data_get_irq_chip_data(data);
> +	struct device *dev = gpio->chip.dev;
> +
> +	return pm_runtime_get_sync(dev);
> +}
> +
> +static void zynq_gpio_irq_pm_put(struct irq_data *data)
> +{
> +	struct zynq_gpio *gpio = irq_data_get_irq_chip_data(data);
> +	struct device *dev = gpio->chip.dev;
> +
> +	pm_runtime_put(dev);
> +}
> +
>   /* irq chip descriptor */
>   static struct irq_chip zynq_gpio_level_irqchip = {
>   	.name		= DRIVER_NAME,
> @@ -480,6 +496,8 @@ static struct irq_chip zynq_gpio_level_irqchip = {
>   	.irq_unmask	= zynq_gpio_irq_unmask,
>   	.irq_set_type	= zynq_gpio_set_irq_type,
>   	.irq_set_wake	= zynq_gpio_set_wake,
> +	.irq_pm_get	= zynq_gpio_irq_pm_get,
> +	.irq_pm_put	= zynq_gpio_irq_pm_put,
>   	.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
>   			  IRQCHIP_MASK_ON_SUSPEND,
>   };
> @@ -492,6 +510,8 @@ static struct irq_chip zynq_gpio_edge_irqchip = {
>   	.irq_unmask	= zynq_gpio_irq_unmask,
>   	.irq_set_type	= zynq_gpio_set_irq_type,
>   	.irq_set_wake	= zynq_gpio_set_wake,
> +	.irq_pm_get	= zynq_gpio_irq_pm_get,
> +	.irq_pm_put	= zynq_gpio_irq_pm_put,
>   	.flags		= IRQCHIP_MASK_ON_SUSPEND,
>   };
>   
> 


-- 
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v2 2/2] gpio: zynq: Implement irq_pm_(get|put) Grygorii Strashko <grygorii.strashko@ti.com> - 2015-11-09 16:10 +0100

csiph-web