Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1260178

[PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine is pending

Show all headers | View raw

From: Anton Bondarenko <anton_bondarenko@mentor.com>

If SPI device supports DMA mode, but DMA controller is not yet
available due to e.g. a delay in the corresponding kernel module
initialization, retry to initialize SPI driver later on instead of
falling back into PIO only mode.

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Anton Bondarenko <anton_bondarenko@mentor.com>
---
 drivers/spi/spi-imx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 6035ddd..d2ea731 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1354,9 +1354,15 @@ static int spi_imx_probe(struct platform_device *pdev)
 	 * Only validated on i.mx6 now, can remove the constrain if validated on
 	 * other chips.
 	 */
-	if (is_imx51_ecspi(spi_imx) &&
-	    spi_imx_sdma_init(&pdev->dev, spi_imx, master))
-		dev_err(&pdev->dev, "dma setup error,use pio instead\n");
+	if (is_imx51_ecspi(spi_imx)) {
+		ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master);
+		if (ret == -EPROBE_DEFER)
+			goto out_clk_put;
+
+		if (ret < 0)
+			dev_err(&pdev->dev, "dma setup error %d, use pio\n",
+				ret);
+	}
 
 	spi_imx->devtype_data->reset(spi_imx);
 
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 0/7] Improvements for SPI IMX driver for Freescale IMX51, IMX53 and IMX6 Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
  [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI controllers Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 5/7] spi: imx: Add support for loopback for ECSPI  controllers Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
  [PATCH v3 6/7] spi: imx: return error from dma channel request Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 6/7] spi: imx: return error from dma channel request Sascha Hauer <s.hauer@pengutronix.de> - 2015-11-05 10:00 +0100
      Re: [PATCH v3 6/7] spi: imx: return error from dma channel request Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-05 17:10 +0100
        Re: [PATCH v3 6/7] spi: imx: return error from dma channel request Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
        Re: [PATCH v3 6/7] spi: imx: return error from dma channel request Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
  [PATCH v3 4/7] spi: imx: add function to check for IMX51 family controller Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 4/7] spi: imx: add function to check for IMX51 family  controller Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
  [PATCH v3 3/7] spi: imx: add support for all SPI word width for DMA transfer Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
  [PATCH v3 1/7] spi: imx: Fix DMA transfer Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 1/7] spi: imx: Fix DMA transfer Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-04 22:10 +0100
    Re: [PATCH v3 1/7] spi: imx: Fix DMA transfer Sascha Hauer <s.hauer@pengutronix.de> - 2015-11-05 09:40 +0100
      Re: [PATCH v3 1/7] spi: imx: Fix DMA transfer Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-05 18:00 +0100
        Re: [PATCH v3 1/7] spi: imx: Fix DMA transfer Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
  [PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine is pending Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine  is pending Sascha Hauer <s.hauer@pengutronix.de> - 2015-11-05 10:00 +0100
      Re: [PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine  is pending Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-05 17:20 +0100
        Re: [PATCH v3 7/7] spi: imx: defer spi initialization, if DMA engine  is pending Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100
  [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated one Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-01 15:50 +0100
    Re: [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated  one Sascha Hauer <s.hauer@pengutronix.de> - 2015-11-05 09:50 +0100
      Re: [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated  one Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-10 21:30 +0100
        Re: [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated  one Sascha Hauer <s.hauer@pengutronix.de> - 2015-11-11 09:20 +0100
          Re: [PATCH v3 2/7] spi: imx: replace fixed timeout with calculated  one Anton Bondarenko <anton.bondarenko.sama@gmail.com> - 2015-11-14 11:10 +0100

csiph-web