Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1247578

Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Hi Harvey,

On Tue, Oct 06, 2015 at 05:27:17PM +0100, Harvey Hunt wrote:
> From: Alex Smith <alex.smith@imgtec.com>
> 
> Add device tree nodes for the NEMC and BCH to the JZ4780 device tree,
> and make use of them in the Ci20 device tree to add a node for the
> board's NAND.
> 
> Note that since the pinctrl driver is not yet upstream, this includes
> neither pin configuration nor busy/write-protect GPIO pins for the
> NAND. Use of the NAND relies on the boot loader to have left the pins
> configured in a usable state, which should be the case when booted
> from the NAND.
> 
> Signed-off-by: Alex Smith <alex.smith@imgtec.com>
> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Brian Norris <computersforpeace@gmail.com>
> Cc: Paul Burton <paul.burton@imgtec.com>
> Cc: linux-mtd@lists.infradead.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-mips@linux-mips.org
> Cc: Alex Smith <alex@alex-smith.me.uk>
> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
> ---
> v6 -> v7:
>  - Add nand-ecc-mode to DT.
>  - Add nand-on-flash-bbt to DT.
> 
> v4 -> v5:
>  - New patch adding DT nodes for the NAND so that the driver can be
>    tested.
> 
>  arch/mips/boot/dts/ingenic/ci20.dts    | 54 ++++++++++++++++++++++++++++++++++
>  arch/mips/boot/dts/ingenic/jz4780.dtsi | 26 ++++++++++++++++
>  2 files changed, 80 insertions(+)
> 
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
> index 9fcb9e7..453f1d3 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
> @@ -42,3 +42,57 @@
>  &uart4 {
>  	status = "okay";
>  };
> +
> +&nemc {
> +	status = "okay";
> +
> +	nand: nand@1 {
> +		compatible = "ingenic,jz4780-nand";

Isn't the NAND a micron part? This doesn't seem right. Is the device
driver and binding already accepted upstream with that compatible
string?

Cheers
James

> +		reg = <1 0 0x1000000>;
> +
> +		ingenic,nemc-tAS = <10>;
> +		ingenic,nemc-tAH = <5>;
> +		ingenic,nemc-tBP = <10>;
> +		ingenic,nemc-tAW = <15>;
> +		ingenic,nemc-tSTRV = <100>;
> +
> +		ingenic,bch-controller = <&bch>;
> +		ingenic,ecc-size = <1024>;
> +		ingenic,ecc-strength = <24>;
> +
> +		nand-ecc-mode = "hw";
> +		nand-on-flash-bbt;
> +
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +
> +		partition@0 {
> +			label = "u-boot-spl";
> +			reg = <0x0 0x0 0x0 0x800000>;
> +		};
> +
> +		partition@0x800000 {
> +			label = "u-boot";
> +			reg = <0x0 0x800000 0x0 0x200000>;
> +		};
> +
> +		partition@0xa00000 {
> +			label = "u-boot-env";
> +			reg = <0x0 0xa00000 0x0 0x200000>;
> +		};
> +
> +		partition@0xc00000 {
> +			label = "boot";
> +			reg = <0x0 0xc00000 0x0 0x4000000>;
> +		};
> +
> +		partition@0x8c00000 {
> +			label = "system";
> +			reg = <0x0 0x4c00000 0x1 0xfb400000>;
> +		};
> +	};
> +};
> +
> +&bch {
> +	status = "okay";
> +};
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index 65389f6..b868b42 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -108,4 +108,30 @@
>  
>  		status = "disabled";
>  	};
> +
> +	nemc: nemc@13410000 {
> +		compatible = "ingenic,jz4780-nemc";
> +		reg = <0x13410000 0x10000>;
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <1 0 0x1b000000 0x1000000
> +			  2 0 0x1a000000 0x1000000
> +			  3 0 0x19000000 0x1000000
> +			  4 0 0x18000000 0x1000000
> +			  5 0 0x17000000 0x1000000
> +			  6 0 0x16000000 0x1000000>;
> +
> +		clocks = <&cgu JZ4780_CLK_NEMC>;
> +
> +		status = "disabled";
> +	};
> +
> +	bch: bch@134d0000 {
> +		compatible = "ingenic,jz4780-bch";
> +		reg = <0x134d0000 0x10000>;
> +
> +		clocks = <&cgu JZ4780_CLK_BCH>;
> +
> +		status = "disabled";
> +	};
>  };
> -- 
> 2.6.0
> 
> 

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes Harvey Hunt <harvey.hunt@imgtec.com> - 2015-10-06 18:30 +0200
  Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> - 2015-10-08 23:30 +0200
    RE: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes Harvey Hunt <Harvey.Hunt@imgtec.com> - 2015-10-14 11:20 +0200
  Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes James Hogan <james.hogan@imgtec.com> - 2015-10-15 10:50 +0200
    Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes Alex Smith <alex@alex-smith.me.uk> - 2015-10-16 12:20 +0200
      Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes James Hogan <james.hogan@imgtec.com> - 2015-10-16 12:40 +0200
        Re: [PATCH v7,3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND  device tree nodes Paul Burton <paul.burton@imgtec.com> - 2015-10-16 12:50 +0200

csiph-web