Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1234974
| From | Kishon Vijay Abraham I <kishon@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 0/4] MIPS: ath79: Add USB support on the TL-WR1043ND |
| Date | 2015-09-29 13:20 +0200 |
| Message-ID | <qe16V-4Sg-1@gated-at.bofh.it> (permalink) |
| References | <q3VFv-23x-9@gated-at.bofh.it> <q64EG-6NN-15@gated-at.bofh.it> <q6Ooa-5un-17@gated-at.bofh.it> <q6OxP-5FK-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi, On Wednesday 09 September 2015 07:51 PM, Arnd Bergmann wrote: > On Wednesday 09 September 2015 16:14:59 Alban wrote: >> On Mon, 07 Sep 2015 15:20:42 +0200 >> Arnd Bergmann <arnd@arndb.de> wrote: >> >>> On Tuesday 01 September 2015 17:23:10 Alban Bedel wrote: >>>> >>>> this serie add a driver for the USB phy on the ATH79 SoCs and enable the >>>> USB port on the TL-WR1043ND. The phy controller is really trivial as it >>>> only use reset lines. >>>> >>> >>> Is this a common thing to have? If other PHY devices are like this, we >>> could instead add a simple generic PHY driver that just asserts all >>> its reset lines in the order as provided, rather than making this a >>> hardware specific driver that ends up getting copied several times. >> >> I don't know how common it is. However I agree that a simple driver that >> can start a clock and toggle a few GPIO and/or reset would make sense. >> >> However in the case of the ATH79 SoC some models have a reset line that >> is misused to force the PHY in sleep mode. Sadly this extra reset must >> be asserted for the PHY to work, so it wouldn't fit in such a generic >> design. >> >> Still we could have such a generic driver and let the ATH79 driver >> build on top of it. Honestly that's what I wanted to do, but getting >> generic drivers with DT support accepted is not easy. That's why I went >> with this driver, it is technically inferior but much easier to get >> considered for merging. > > Ok, fair enough. If we end up doing a more generic driver for this, > we can still consider adding the compatible string there, potentially > with some workaround for the sleep mode. hmm, makes sense to have a generic PHY driver for PHY's which doesn't have PHY registers to be programmed like a PHY driver which enables only clocks, regulators, drives gpios etc. Cheers Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH 0/4] MIPS: ath79: Add USB support on the TL-WR1043ND Kishon Vijay Abraham I <kishon@ti.com> - 2015-09-29 13:20 +0200
csiph-web