Re: N900 sleep mode (in 4.5-rc0, if that matters)

From	Pavel Machek <pavel@ucw.cz>
Newsgroups	linux.kernel
Subject	Re: N900 sleep mode (in 4.5-rc0, if that matters)
Date	2016-02-07 22:30 +0100
Message-ID	<qZF45-3xt-7@gated-at.bofh.it> (permalink)
References	(5 earlier) <qWK9Y-DX-3@gated-at.bofh.it> <qWM26-1Zb-9@gated-at.bofh.it> <qXreW-6Nz-17@gated-at.bofh.it> <qXu38-mK-23@gated-at.bofh.it> <qXuZc-112-21@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi!

> > (I assume I have to insmod and rmmod, right? Because powersave is not
> > entered if I simply compile-out usb).
> 
> Depending on what the bootloader does and probably also if
> USB was used during the booting.. So yeah you may need to modprobe
> and then rmmod.
> 
> > Would you have commit ids for those rmmod fixes? It might be good to
> > push them into stable, and I should try again with them applied...
> 
> 055555fc459 ("usb: musb: core: Fix handling of the phy notifications")
> 03e43528ab68 ("usb: musb: Fix unbalanced pm_runtime_enable")

Ok, with that, I can insmod and rmmod. But I still get:

00001fff 48005020 (fa005020) cm_idlest_per blocking bits: 0007e000
ffdffebd 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200042
0000000d 48004a28 (fa004a28) cm_idlest3_core

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-01-30 21:10 +0100
  Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-01-30 21:20 +0100
    Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-01-30 23:20 +0100
      Re: N900 sleep mode (in 4.5-rc0, if that matters) Tony Lindgren <tony@atomide.com> - 2016-02-01 19:20 +0100
        Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-02-01 22:20 +0100
          Re: N900 sleep mode (in 4.5-rc0, if that matters) Tony Lindgren <tony@atomide.com> - 2016-02-01 23:20 +0100
            Re: N900 sleep mode (in 4.5-rc0, if that matters) Tony Lindgren <tony@atomide.com> - 2016-02-04 06:40 +0100
              Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-02-07 22:40 +0100
                Re: N900 sleep mode (in 4.5-rc0, if that matters) Pali Rohár <pali.rohar@gmail.com> - 2016-02-08 10:00 +0100
            Re: N900 sleep mode (in 4.5-rc0, if that matters) Pavel Machek <pavel@ucw.cz> - 2016-02-07 22:30 +0100

csiph-web