Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1317874

[PATCH v7 07/10] usb: dbc: handle endpoint stall

From Lu Baolu <baolu.lu@linux.intel.com>
Newsgroups linux.kernel
Subject [PATCH v7 07/10] usb: dbc: handle endpoint stall
Date 2016-01-26 14:00 +0100
Message-ID <qVbo0-4eF-35@gated-at.bofh.it> (permalink)
References <qVbnY-4eF-11@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


In case of endpoint stall, software is able to detect the situation
by reading DCCTRL.HIT or DCCTRL.HOT bits. DbC follows the normal USB
framework to handle endpoint stall. When software detects endpoint
stall situation, it should wait until endpoint is recovered before
read or write oprations.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/usb/early/xhci-dbc.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index c81df40..344d93e 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -1163,6 +1163,37 @@ static int xdbc_wait_until_dbc_configured(void)
 	return -ETIMEDOUT;
 }
 
+static int xdbc_wait_until_epstall_cleared(bool read)
+{
+	int timeout = 0;
+
+	if (read) {
+		do {
+			if (!(readl(&xdbcp->xdbc_reg->control) & CTRL_HIT)) {
+				xdbcp->in_ep_state = EP_RUNNING;
+
+				return 0;
+			}
+
+			xdbcp->in_ep_state = EP_HALTED;
+			xdbc_udelay(10);
+		} while (timeout++ < XDBC_LOOPS);
+	} else {
+		do {
+			if (!(readl(&xdbcp->xdbc_reg->control) & CTRL_HOT)) {
+				xdbcp->out_ep_state = EP_RUNNING;
+
+				return 0;
+			}
+
+			xdbcp->out_ep_state = EP_HALTED;
+			xdbc_udelay(10);
+		} while (timeout++ < XDBC_LOOPS);
+	}
+
+	return -ETIMEDOUT;
+}
+
 static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 {
 	u64 addr;
@@ -1182,6 +1213,11 @@ static int xdbc_bulk_transfer(void *data, int size, int loops, bool read)
 		return -EPERM;
 	}
 
+	if (xdbc_wait_until_epstall_cleared(read)) {
+		xdbc_trace("%s: endpoint not ready\n", __func__);
+		return -EPERM;
+	}
+
 	ring = (read ? &xdbcp->in_ring : &xdbcp->out_ring);
 	trb = ring->enqueue;
 	cycle = ring->cycle_state;
-- 
2.1.4

Back to linux.kernel | Previous | Next | Find similar | Unroll thread


Thread

[PATCH v7 07/10] usb: dbc: handle endpoint stall Lu Baolu <baolu.lu@linux.intel.com> - 2016-01-26 14:00 +0100

csiph-web