Re: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m

From	Lee Jones <lee.jones@linaro.org>
Newsgroups	linux.kernel
Subject	Re: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m
Date	2016-01-25 14:00 +0100
Message-ID	<qUOUq-40h-15@gated-at.bofh.it> (permalink)
References	<qTbBL-5Oq-11@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Thu, 21 Jan 2016, Axel Lin wrote:

> These drivers can be built as module, so make them depend on I2C rather
> than I2C=y.
> 
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
>  drivers/mfd/Kconfig | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..6c4ebd9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -203,7 +203,7 @@ config MFD_DA9062
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
> -	depends on I2C=y
> +	depends on I2C
>  	help
>  	  Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
>  	  This includes the I2C driver and core APIs.
> @@ -215,7 +215,7 @@ config MFD_DA9063
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
> -	depends on I2C=y
> +	depends on I2C
>  	help
>  	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
>  	  This includes the I2C driver and core APIs.
> @@ -224,7 +224,7 @@ config MFD_DA9063
>  
>  config MFD_DA9150
>  	tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
> -	depends on I2C=y
> +	depends on I2C
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
> @@ -445,7 +445,7 @@ config MFD_KEMPLD
>  
>  config MFD_88PM800
>  	tristate "Marvell 88PM800"
> -	depends on I2C=y
> +	depends on I2C
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
>  	select MFD_CORE
> @@ -457,7 +457,7 @@ config MFD_88PM800
>  
>  config MFD_88PM805
>  	tristate "Marvell 88PM805"
> -	depends on I2C=y
> +	depends on I2C
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
>  	select MFD_CORE
> @@ -538,7 +538,7 @@ config MFD_MAX77843
>  config MFD_MAX8907
>  	tristate "Maxim Semiconductor MAX8907 PMIC Support"
>  	select MFD_CORE
> -	depends on I2C=y
> +	depends on I2C
>  	select REGMAP_I2C
>  	select REGMAP_IRQ
>  	help
> @@ -743,7 +743,7 @@ config MFD_RTSX_PCI
>  
>  config MFD_RT5033
>  	tristate "Richtek RT5033 Power Management IC"
> -	depends on I2C=y
> +	depends on I2C
>  	select MFD_CORE
>  	select REGMAP_I2C
>  	select REGMAP_IRQ

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] mfd: Allow i2c modular drivers to build with I2C=m Axel Lin <axel.lin@ingics.com> - 2016-01-21 01:50 +0100
  RE: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m "Opensource [Adam Thomson]" <Adam.Thomson.Opensource@diasemi.com> - 2016-01-21 11:00 +0100
  Re: [PATCH] mfd: Allow i2c modular drivers to build with I2C=m Lee Jones <lee.jones@linaro.org> - 2016-01-25 14:00 +0100

csiph-web