Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1288168

Re: [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12

Show all headers | View raw

On 09.12.2015 13:08, Chanwoo Choi wrote:
> This patch adds the bus noes using VDD_MIF for Exynos4x12 SoC.

s/noes/nodes/

> Exynos4x12 has the following AXI buses to translate data
> between DRAM and DMC/ACP/C2C.
> 
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4x12.dtsi | 72 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
> index b77dac61ffb5..3bcf0939755e 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -282,6 +282,78 @@
>  		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
>  		#iommu-cells = <0>;
>  	};
> +
> +	bus_dmc: bus_dmc {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_DMC>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_dmc_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_acp: bus_acp {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_ACP>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_acp_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_c2c: bus_c2c {
> +		compatible = "samsung,exynos-bus";
> +		clocks = <&clock CLK_DIV_C2C>;
> +		clock-names = "bus";
> +		operating-points-v2 = <&bus_dmc_opp_table>;
> +		status = "disabled";
> +	};
> +
> +	bus_dmc_opp_table: opp_table1 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp00 {
> +			opp-hz = /bits/ 64 <100000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp01 {
> +			opp-hz = /bits/ 64 <134000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp02 {
> +			opp-hz = /bits/ 64 <160000000>;
> +			opp-microvolt = <900000>;
> +		};
> +		opp03 {
> +			opp-hz = /bits/ 64 <200000000>;
> +			opp-microvolt = <950000>;

The exyno4_bus.c (from mainline) uses 267 MHz here. Why choosing 200 MHz?

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-09 05:20 +0100
  Re: [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for  Exynos4x12 Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-12-10 04:20 +0100
    Re: [PATCH v2 13/19] ARM: dts: Add bus nodes using VDD_MIF for  Exynos4x12 Chanwoo Choi <cw00.choi@samsung.com> - 2015-12-10 05:30 +0100

csiph-web