Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1220154
| From | Vaibhav Hiremath <vaibhav.hiremath@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH-v2 1/3] mmc: sdhci-pxav3: Fix tabbing issue |
| Date | 2015-09-07 15:00 +0200 |
| Message-ID | <q64bE-60R-7@gated-at.bofh.it> (permalink) |
| References | <q62We-4iH-17@gated-at.bofh.it> <q62We-4iH-19@gated-at.bofh.it> <q63pf-55P-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Monday 07 September 2015 05:26 PM, Jisheng Zhang wrote:
> On Mon, 7 Sep 2015 17:01:09 +0530
> Vaibhav Hiremath <vaibhav.hiremath@linaro.org> wrote:
>
>> There were some coding style issues where spaces have been used instead
>> of tabs, for example, in macro definitions, alignment of function
>> declarations/definitions, etc...
>>
>> This patch fixes all such occurrences in the code.
>>
>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
>> ---
>> drivers/mmc/host/sdhci-pxav3.c | 46 +++++++++++++++++++++---------------------
>> 1 file changed, 23 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
>> index 946d37f..7a07177 100644
>> --- a/drivers/mmc/host/sdhci-pxav3.c
>> +++ b/drivers/mmc/host/sdhci-pxav3.c
>> @@ -39,24 +39,24 @@
>> #include "sdhci.h"
>> #include "sdhci-pltfm.h"
>>
>> -#define PXAV3_RPM_DELAY_MS 50
>> +#define PXAV3_RPM_DELAY_MS 50
>>
>> -#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
>> -#define SDCLK_SEL 0x100
>> -#define SDCLK_DELAY_SHIFT 9
>> -#define SDCLK_DELAY_MASK 0x1f
>> +#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
>> +#define SDCLK_SEL 0x100
>> +#define SDCLK_DELAY_SHIFT 9
>> +#define SDCLK_DELAY_MASK 0x1f
>>
>> -#define SD_CFG_FIFO_PARAM 0x100
>> -#define SDCFG_GEN_PAD_CLK_ON (1<<6)
>> -#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
>> -#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
>> +#define SD_CFG_FIFO_PARAM 0x100
>> +#define SDCFG_GEN_PAD_CLK_ON (1<<6)
>> +#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
>> +#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
>>
>> -#define SD_SPI_MODE 0x108
>> -#define SD_CE_ATA_1 0x10C
>> +#define SD_SPI_MODE 0x108
>> +#define SD_CE_ATA_1 0x10C
>>
>> -#define SD_CE_ATA_2 0x10E
>> -#define SDCE_MISC_INT (1<<2)
>> -#define SDCE_MISC_INT_EN (1<<1)
>> +#define SD_CE_ATA_2 0x10E
>> +#define SDCE_MISC_INT (1<<2)
>> +#define SDCE_MISC_INT_EN (1<<1)
>>
>> struct sdhci_pxa {
>> struct clk *clk_core;
>> @@ -284,7 +284,7 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
>> * FE-2946959
>> */
>> if (pxa->sdio3_conf_reg) {
>> - u8 reg_val = readb(pxa->sdio3_conf_reg);
>> + u8 reg_val = readb(pxa->sdio3_conf_reg);
>>
>> if (uhs == MMC_TIMING_UHS_SDR50 ||
>> uhs == MMC_TIMING_UHS_DDR50) {
>> @@ -304,20 +304,20 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
>> }
>>
>> static const struct sdhci_ops pxav3_sdhci_ops = {
>> - .set_clock = sdhci_set_clock,
>> - .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
>> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> - .set_bus_width = sdhci_set_bus_width,
>> - .reset = pxav3_reset,
>> - .set_uhs_signaling = pxav3_set_uhs_signaling,
>> + .set_clock = sdhci_set_clock,
>> + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
>> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> + .set_bus_width = sdhci_set_bus_width,
>> + .reset = pxav3_reset,
>> + .set_uhs_signaling = pxav3_set_uhs_signaling,
>
> IMHO, this is not an improvement, previous style is fine and I saw
> such style in kernel here and there
>
I had received feedback to use above style on different patch-series.
And I also think this looks more clean and readable.
Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH-v2 1/3] mmc: sdhci-pxav3: Fix tabbing issue Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 13:40 +0200
Re: [PATCH-v2 1/3] mmc: sdhci-pxav3: Fix tabbing issue Jisheng Zhang <jszhang@marvell.com> - 2015-09-07 14:10 +0200
Re: [PATCH-v2 1/3] mmc: sdhci-pxav3: Fix tabbing issue Vaibhav Hiremath <vaibhav.hiremath@linaro.org> - 2015-09-07 15:00 +0200
csiph-web