Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1207913

Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory"

Show all headers | View raw

On Wed, Aug 12, 2015 at 11:50:05PM -0400, Dan Williams wrote:
> While pmem is usable as a block device or via DAX mappings to userspace
> there are several usage scenarios that can not target pmem due to its
> lack of struct page coverage. In preparation for "hot plugging" pmem
> into the vmemmap add ZONE_DEVICE as a new zone to tag these pages
> separately from the ones that are subject to standard page allocations.
> Importantly "device memory" can be removed at will by userspace
> unbinding the driver of the device.
> 
> Having a separate zone prevents allocation and otherwise marks these
> pages that are distinct from typical uniform memory.  Device memory has
> different lifetime and performance characteristics than RAM.  However,
> since we have run out of ZONES_SHIFT bits this functionality currently
> depends on sacrificing ZONE_DMA.
> 
> arch_add_memory() is reorganized a bit in preparation for a new
> arch_add_dev_memory() api, for now there is no functional change to the
> memory hotplug code.
> 
> Cc: H. Peter Anvin <hpa@zytor.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Rik van Riel <riel@redhat.com>
> Cc: Mel Gorman <mgorman@suse.de>
> Cc: linux-mm@kvack.org
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> ---
>  arch/x86/Kconfig       |   13 +++++++++++++
>  arch/x86/mm/init_64.c  |   32 +++++++++++++++++++++-----------
>  include/linux/mmzone.h |   23 +++++++++++++++++++++++
>  mm/memory_hotplug.c    |    5 ++++-
>  mm/page_alloc.c        |    3 +++
>  5 files changed, 64 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index b3a1a5d77d92..64829b17980b 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -308,6 +308,19 @@ config ZONE_DMA
>  
>  	  If unsure, say Y.
>  
> +config ZONE_DEVICE
> +	bool "Device memory (pmem, etc...) hotplug support" if EXPERT
> +	default !ZONE_DMA
> +	depends on !ZONE_DMA
> +	help
> +	  Device memory hotplug support allows for establishing pmem,
> +	  or other device driver discovered memory regions, in the
> +	  memmap. This allows pfn_to_page() lookups of otherwise
> +	  "device-physical" addresses which is needed for using a DAX
> +	  mapping in an O_DIRECT operation, among other things.
> +
> +	  If FS_DAX is enabled, then say Y.
> +
>  config SMP
>  	bool "Symmetric multi-processing support"
>  	---help---
> diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
> index 3fba623e3ba5..94f0fa56f0ed 100644
> --- a/arch/x86/mm/init_64.c
> +++ b/arch/x86/mm/init_64.c
> @@ -683,15 +683,8 @@ static void  update_end_of_memory_vars(u64 start, u64 size)
>  	}
>  }
>  
> -/*
> - * Memory is added always to NORMAL zone. This means you will never get
> - * additional DMA/DMA32 memory.
> - */
> -int arch_add_memory(int nid, u64 start, u64 size)
> +static int __arch_add_memory(int nid, u64 start, u64 size, struct zone *zone)
>  {
> -	struct pglist_data *pgdat = NODE_DATA(nid);
> -	struct zone *zone = pgdat->node_zones +
> -		zone_for_memory(nid, start, size, ZONE_NORMAL);
>  	unsigned long start_pfn = start >> PAGE_SHIFT;
>  	unsigned long nr_pages = size >> PAGE_SHIFT;
>  	int ret;
> @@ -701,11 +694,28 @@ int arch_add_memory(int nid, u64 start, u64 size)
>  	ret = __add_pages(nid, zone, start_pfn, nr_pages);
>  	WARN_ON_ONCE(ret);
>  
> -	/* update max_pfn, max_low_pfn and high_memory */
> -	update_end_of_memory_vars(start, size);
> +	/*
> +	 * Update max_pfn, max_low_pfn and high_memory, unless we added
> +	 * "device memory" which should not effect max_pfn
> +	 */
> +	if (!is_dev_zone(zone))
> +		update_end_of_memory_vars(start, size);

What is the rational for not updating max_pfn, max_low_pfn, ... ?

Cheers,
Jérôme
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-13 06:00 +0200
  Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Jerome Glisse <j.glisse@gmail.com> - 2015-08-14 23:40 +0200
    Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-15 00:00 +0200
      Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Jerome Glisse <j.glisse@gmail.com> - 2015-08-15 00:10 +0200
        Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-15 00:40 +0200
          Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-15 04:20 +0200
            Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Jerome Glisse <j.glisse@gmail.com> - 2015-08-17 23:50 +0200
              Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-18 02:50 +0200
                Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Jerome Glisse <j.glisse@gmail.com> - 2015-08-18 19:00 +0200
                Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Dan Williams <dan.j.williams@intel.com> - 2015-08-18 19:30 +0200
                Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Jerome Glisse <j.glisse@gmail.com> - 2015-08-18 21:10 +0200
      Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Christoph Hellwig <hch@lst.de> - 2015-08-15 11:10 +0200
  Re: [RFC PATCH 1/7] x86, mm: ZONE_DEVICE for "device memory" Christoph Hellwig <hch@lst.de> - 2015-08-15 15:40 +0200

csiph-web