Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #185551 > unrolled thread
| Started by | Serkan KURT <ssserkkk@yahoo.com> |
|---|---|
| First post | 2017-08-20 12:10 +0200 |
| Last post | 2017-08-20 22:40 +0200 |
| Articles | 7 — 2 participants |
Back to article view | Back to linux.debian.user
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
How can I work Bluetooth device (ar3012)? It is not working. Serkan KURT <ssserkkk@yahoo.com> - 2017-08-20 12:10 +0200
Re: How can I work Bluetooth device (ar3012)? It is not working. deloptes <deloptes@gmail.com> - 2017-08-20 12:40 +0200
Yan: How can I work Bluetooth device (ar3012)? It is not working. Serkan KURT <ssserkkk@yahoo.com> - 2017-08-20 13:50 +0200
Re: Yan: How can I work Bluetooth device (ar3012)? It is not working. deloptes <deloptes@gmail.com> - 2017-08-20 17:20 +0200
Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. Serkan KURT <ssserkkk@yahoo.com> - 2017-08-20 18:30 +0200
Re: Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. deloptes <deloptes@gmail.com> - 2017-08-20 21:20 +0200
Yan: Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. Serkan KURT <ssserkkk@yahoo.com> - 2017-08-20 22:40 +0200
| From | Serkan KURT <ssserkkk@yahoo.com> |
|---|---|
| Date | 2017-08-20 12:10 +0200 |
| Subject | How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugvl7-5zS-1@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
Hi.I want to working bluetooth device on samsung np300e5c laptop. But I can not use it. #listusb ... Atheros Communications, Inc. AR3012 Bluetooth 4.0 I am using Debian Stretch amd64, Kernel 4.9, KDE. How can I solve this problem? Thank you...
[toc] | [next] | [standalone]
| From | deloptes <deloptes@gmail.com> |
|---|---|
| Date | 2017-08-20 12:40 +0200 |
| Message-ID | <ugvOa-5NO-21@gated-at.bofh.it> |
| In reply to | #185551 |
Serkan KURT wrote: > Hi.I want to working bluetooth device on samsung np300e5c laptop. But I > can not use it. > #listusb ... Atheros Communications, Inc. AR3012 Bluetooth 4.0 > I am using Debian Stretch amd64, Kernel 4.9, KDE. > How can I solve this problem? > > Thank you... I don't know anything about this bt device, I have $ lsusb | grep -i bluetoo Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) I can say following as general instructions: Have you seen the kernel drivers loaded? $ lsmod | grep bt btusb 36864 0 btrtl 16384 1 btusb btbcm 16384 1 btusb ... etc Have you installed all related packages? Following should be ok. $ dpkg -l | grep blue ii blueman 2.0.4-1 amd64 Graphical bluetooth manager ii bluez 5.43-2 amd64 Bluetooth tools and daemons ii bluez-firmware 1.2-3 all Firmware for Bluetooth devices ii bluez-obexd 5.43-2 amd64 bluez obex daemon ii bluez-tools 0.2.0~20140808-5+b2 amd64 Set of tools to manage Bluetooth devices for linux ii libbluetooth3:amd64 5.43-2 amd64 Library to use the BlueZ Linux Bluetooth stack ii pulseaudio-module-bluetooth 10.0-1+deb9u1 amd64 Bluetooth module for PulseAudio sound server ii python-bluez 0.22-1 amd64 Python wrappers around BlueZ for rapid bluetooth development you then either use blueman-applet (with gui) or bluetoothctl (command line). Notice here the firmware package - either unplug/plug the device or driver reload is required to load the firmware after installation. there are plenty of howtos for both of them on the net write back if you have further questions regards
[toc] | [prev] | [next] | [standalone]
| From | Serkan KURT <ssserkkk@yahoo.com> |
|---|---|
| Date | 2017-08-20 13:50 +0200 |
| Subject | Yan: How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugwTU-6pr-5@gated-at.bofh.it> |
| In reply to | #185552 |
[Multipart message — attachments visible in raw view] — view raw
Thank you for your interest. I think, all necessary packages are installed. Unfortunately I couldn't find any solution.
# lsmod | grep btebtable_filter 16384 0
ebtables 36864 1 ebtable_filter
btusb 45056 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
btintel 16384 1 btusb
bluetooth 552960 42 btrtl,btintel,bnep,btbcm,rfcomm,ath3k,btusb
x_tables 36864 5 ip_tables,ebtables,iptable_filter,ip6table_filter,ip6_tables
usbcore 249856 5 uvcvideo,ehci_hcd,ath3k,btusb,ehci_pci
# dpkg -l | grep blueii bluebird-gtk-theme 1.2-1
ii bluedevil 4:5.8.4-1
ii bluefish 2.2.9-1+b1
ii bluefish-data 2.2.9-1
ii bluefish-plugins 2.2.9-1+b1
ii bluetooth 5.43-2
ii bluez 5.43-2
ii bluez-cups 5.43-2
ii bluez-dbg 5.43-2
ii bluez-firmware 1.2-3
ii bluez-hcidump 5.43-2
ii bluez-obexd 5.43-2
ii bluez-test-scripts 5.43-2
ii bluez-test-tools 5.43-2
ii bluez-tools 0.2.0~20140808-5+b2
ii libbluetooth-dev 5.43-2
ii libbluetooth3:amd64 5.43-2
ii libbluetooth3-dbg 5.43-2
ii libkf5bluezqt-data 5.28.0-1
ii libkf5bluezqt-dev 5.28.0-1
ii libkf5bluezqt6:amd64 5.28.0-1
ii libqt5bluetooth5:amd64 5.7.1~20161021-2
ii libqt5bluetooth5-bin:amd64 5.7.1~20161021-2
ii pulseaudio-module-bluetooth 10.0-1+deb9u1
ii python-bluez 0.22-1
ii qml-module-org-kde-bluezqt:amd64 5.28.0-1
------------------------------------------------------------------------------------------------------------------------------------------
20 Ağustos 2017 13:37 Pazar tarihinde deloptes <deloptes@gmail.com> şöyle yazdı:
Serkan KURT wrote:
> Hi.I want to working bluetooth device on samsung np300e5c laptop. But I
> can not use it.
> #listusb ... Atheros Communications, Inc. AR3012 Bluetooth 4.0
> I am using Debian Stretch amd64, Kernel 4.9, KDE.
> How can I solve this problem?
>
> Thank you...
I don't know anything about this bt device, I have
$ lsusb | grep -i bluetoo
Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth
Dongle (HCI mode)
I can say following as general instructions:
Have you seen the kernel drivers loaded?
$ lsmod | grep bt
btusb 36864 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
...
etc
Have you installed all related packages? Following should be ok.
$ dpkg -l | grep blue
ii blueman 2.0.4-1
amd64 Graphical bluetooth manager
ii bluez 5.43-2
amd64 Bluetooth tools and daemons
ii bluez-firmware 1.2-3
all Firmware for Bluetooth devices
ii bluez-obexd 5.43-2
amd64 bluez obex daemon
ii bluez-tools 0.2.0~20140808-5+b2
amd64 Set of tools to manage Bluetooth devices for linux
ii libbluetooth3:amd64 5.43-2
amd64 Library to use the BlueZ Linux Bluetooth stack
ii pulseaudio-module-bluetooth 10.0-1+deb9u1
amd64 Bluetooth module for PulseAudio sound server
ii python-bluez 0.22-1
amd64 Python wrappers around BlueZ for rapid bluetooth development
you then either use blueman-applet (with gui) or bluetoothctl (command
line). Notice here the firmware package - either unplug/plug the device or
driver reload is required to load the firmware after installation.
there are plenty of howtos for both of them on the net
write back if you have further questions
regards
[toc] | [prev] | [next] | [standalone]
| From | deloptes <deloptes@gmail.com> |
|---|---|
| Date | 2017-08-20 17:20 +0200 |
| Subject | Re: Yan: How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugAb8-d9-5@gated-at.bofh.it> |
| In reply to | #185558 |
Serkan KURT wrote:
> Thank you for your interest. I think, all necessary packages are
> installed. Unfortunately I couldn't find any solution.
I think you installed more than enough.
Check rfkill
If bt is disabled, enable via rfkill or your gui of choice - I use
blueman-applet
$ sudo rfkill list
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
$ sudo rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
now start
$ bluetoothctl
[NEW] Controller 00:10:60:D1:0F:5C xxxxxxx [default]
[NEW] Device xxxxxxxxxxxxxxxxxx
[bluetooth]#
let us see where we are and we'll think further
If this does not work, you'll have to check if udev is enabling hciX device
for the adapter as communication goes via this device AFAIK
regards
[toc] | [prev] | [next] | [standalone]
| From | Serkan KURT <ssserkkk@yahoo.com> |
|---|---|
| Date | 2017-08-20 18:30 +0200 |
| Subject | Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugBgS-Qz-15@gated-at.bofh.it> |
| In reply to | #185566 |
[Multipart message — attachments visible in raw view] — view raw
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
and
bluetoothctl can not connecting bluetoothd...([bluetooth]# nnect to bluetoothd...)
I added ath3k to blacklist. After I tried "modprobe ath3k". Bluetooth device appeared in the KDE notificator. After I disabled bluetooth with KDE, I could not enable it again.
Laptop : Samsung NP300E5C
20 Ağustos 2017 18:17 Pazar tarihinde deloptes <deloptes@gmail.com> şöyle yazdı:
Serkan KURT wrote:
> Thank you for your interest. I think, all necessary packages are
> installed. Unfortunately I couldn't find any solution.
I think you installed more than enough.
Check rfkill
If bt is disabled, enable via rfkill or your gui of choice - I use
blueman-applet
$ sudo rfkill list
0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
$ sudo rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
now start
$ bluetoothctl
[NEW] Controller 00:10:60:D1:0F:5C xxxxxxx [default]
[NEW] Device xxxxxxxxxxxxxxxxxx
[bluetooth]#
let us see where we are and we'll think further
If this does not work, you'll have to check if udev is enabling hciX device
for the adapter as communication goes via this device AFAIK
regards
[toc] | [prev] | [next] | [standalone]
| From | deloptes <deloptes@gmail.com> |
|---|---|
| Date | 2017-08-20 21:20 +0200 |
| Subject | Re: Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugDVo-2Bc-7@gated-at.bofh.it> |
| In reply to | #185578 |
Serkan KURT wrote: > I added ath3k to blacklist. After I tried "modprobe ath3k". Bluetooth > device appeared in the KDE notificator. After I disabled bluetooth with > KDE, I could not enable it again. Laptop : Samsung NP300E5C did you check output of dmesg ? Could you share here? you could also try the hcitool to see the status. I assume it is internal/built in BT via usb (internal) link So the problem could be at few levels. - kernel driver - usb/bt stack - udev look in those directions and share logfiles. For example after "modprobe ath3k" do $ dmesg and post the relevant portion here I also found : https://wireless.wiki.kernel.org/en/users/drivers/ath3k (Last modified: 2015/01/26 09:49 ) regards
[toc] | [prev] | [next] | [standalone]
| From | Serkan KURT <ssserkkk@yahoo.com> |
|---|---|
| Date | 2017-08-20 22:40 +0200 |
| Subject | Yan: Yan: Yan: How can I work Bluetooth device (ar3012)? It is not working. |
| Message-ID | <ugFaO-3fW-3@gated-at.bofh.it> |
| In reply to | #185598 |
[Multipart message — attachments visible in raw view] — view raw
I have solved the problem. I have just installed acpi packages :) . I didn't use blacklist.
#apt-get install ^acpi*
Thank you deloptes for your efforts.
20 Ağustos 2017 22:14 Pazar tarihinde deloptes <deloptes@gmail.com> şöyle yazdı:
Serkan KURT wrote:
> I added ath3k to blacklist. After I tried "modprobe ath3k". Bluetooth
> device appeared in the KDE notificator. After I disabled bluetooth with
> KDE, I could not enable it again. Laptop : Samsung NP300E5C
did you check output of dmesg ? Could you share here?
you could also try the hcitool to see the status.
I assume it is internal/built in BT via usb (internal) link
So the problem could be at few levels.
- kernel driver
- usb/bt stack
- udev
look in those directions and share logfiles. For example after "modprobe
ath3k" do
$ dmesg
and post the relevant portion here
I also found : https://wireless.wiki.kernel.org/en/users/drivers/ath3k (Last
modified: 2015/01/26 09:49 )
regards
[toc] | [prev] | [standalone]
Back to top | Article view | linux.debian.user
csiph-web