Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #203193

Re: librecad

Show all headers | View raw

On Saturday 08 December 2018 17:53:01 Jeremy Nicoll wrote:
[...]
> The pid was there so that when writing and testing the script
> I could tell which was which in taskmanager, which saw them
> all as the same thing - an instance of the script language's
> interpreter being run.
>
I can see where that could, if you "got your head" around it, be pretty 
handy. But half or more of my gcode mistakes are typu's. And the rs274D 
interpretor is very VERY good at recommending you learn to type. ;-)

> The script is written in ooREXX; anyone who wants it can have
> a copy.  I expect somethig similar could be written in loads of
> other langages, but it's the one I know best.

Back when we did most of our scripting on amiga's, ARexx was the language 
to top all the rest, but then when we got tired of the instability, and 
I went to linux, where I found that neither Rexx nor Regina could get 
past line 2 of any of my utilities without barfing all over itself as 
neither of the "next gen" rexx's weren't anything like ARexx, which Bill 
Hawes never got a damned dime from commode door for writing it, but it 
had calls into every facility amigados had, so there weren't any fences 
between what you wanted it to do, and what you could do. So I fell back 
to bash. And while the bash docs are at least 250 pages, its not ARexx. 
But it handles the coupling between fetchmail/procmail and kmail, so I 
have virtually nothing to but reply and send, and hit the plus key to 
read the next message. Computers are to reduce one's work, not multiply 
it times 15. Call me lazy, but it "works for me".. 

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

librecad Gene Heskett <gheskett@shentel.net> - 2018-12-06 23:40 +0100
  Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-06 23:50 +0100
    Re: librecad Yves <ydubeau@pm.me> - 2018-12-07 01:30 +0100
      Re: librecad Doug <dmcgarrett@optonline.net> - 2018-12-07 02:10 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 03:10 +0100
      Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 02:50 +0100
    Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 01:50 +0100
      Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 02:50 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 03:20 +0100
          Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 03:30 +0100
            Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 04:40 +0100
            Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-07 19:50 +0100
              Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 20:20 +0100
                Re: librecad Greg Wooledge <wooledg@eeg.ccf.org> - 2018-12-07 20:30 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 00:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 02:00 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 03:50 +0100
                Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-08 05:20 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 06:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 14:40 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 20:00 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 20:50 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 21:10 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 21:30 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 22:00 +0100
                Unpacking a large zipfile, was Re: librecad David Wright <deblis@lionunicorn.co.uk> - 2018-12-09 00:20 +0100
                Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-09 00:10 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-09 01:50 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-09 02:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-09 03:20 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-09 03:30 +0100
                Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-09 03:30 +0100
              Re: librecad (was) Gene Heskett <gheskett@shentel.net> - 2018-12-08 00:40 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 04:20 +0100
        Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-07 04:50 +0100
      Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 10:30 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 14:50 +0100
          Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 15:10 +0100
      Re: librecad Joe <joe@jretrading.com> - 2018-12-07 11:00 +0100
        Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 11:30 +0100
  Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-07 07:50 +0100
    Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 14:50 +0100
      Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 16:20 +0100
        Re: librecad Erik Christiansen <dvalin@internode.on.net> - 2018-12-08 03:00 +0100
          Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 04:30 +0100
        Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 04:50 +0100
    Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 15:10 +0100

csiph-web