Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.debian.user > #203177

Re: librecad

Show all headers | View raw

On Saturday 08 December 2018 08:38:15 John Hasler wrote:

> Gene writes:
> > LinuxCNC depends on a low latency IRQ response.
> > ...
>
> We understand all that, and I understand and agree with the "If it
> aint broke don't fix it" philosophy that leads to running "obsolete"
> computers and software in machine controls.  What does it have to do
> with the machine you run your CAD software on?

Nothing John, except the vertical, even seemingly leaning toward the 
beginner, learning curve to really put that software to productive use. 
I've started to do something in freecad several times, I don't have it 
here anymore, but the lack of a plainly marked, multiple step undo gets 
me into a dead end box that results in a quit w/o save every time. Maybe 
its there, but I've not found it. If I build a tool changer for the 
biggest mill I have, I expect that I'll need to use its facility to 
couple moving parts to see if there's any interference between stuff 
just to remove the mistakes I'll no doubt make if I just write the gcode 
to generate the thing one part at a time.

Unfortunately, even the src.zip has disappeared from github.
But poking around I did find FreeCAD-master.zip, and its copying to ~/src 
right now. Looks like a pretty long list of dependencies from the wiki 
on building it. Couple pages if printed.  So we'll see if its still 
buildable on wheezy. And this is probably going to be a long process. So 
I'll send this and advise success/fail later.

Thanks John.

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

librecad Gene Heskett <gheskett@shentel.net> - 2018-12-06 23:40 +0100
  Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-06 23:50 +0100
    Re: librecad Yves <ydubeau@pm.me> - 2018-12-07 01:30 +0100
      Re: librecad Doug <dmcgarrett@optonline.net> - 2018-12-07 02:10 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 03:10 +0100
      Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 02:50 +0100
    Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 01:50 +0100
      Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 02:50 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 03:20 +0100
          Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 03:30 +0100
            Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 04:40 +0100
            Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-07 19:50 +0100
              Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 20:20 +0100
                Re: librecad Greg Wooledge <wooledg@eeg.ccf.org> - 2018-12-07 20:30 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 00:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 02:00 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 03:50 +0100
                Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-08 05:20 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 06:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 14:40 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 20:00 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 20:50 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 21:10 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 21:30 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 22:00 +0100
                Unpacking a large zipfile, was Re: librecad David Wright <deblis@lionunicorn.co.uk> - 2018-12-09 00:20 +0100
                Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-09 00:10 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-09 01:50 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-09 02:50 +0100
                Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-09 03:20 +0100
                Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-09 03:30 +0100
                Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-09 03:30 +0100
              Re: librecad (was) Gene Heskett <gheskett@shentel.net> - 2018-12-08 00:40 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 04:20 +0100
        Re: librecad Joe Pfeiffer <pfeiffer@cs.nmsu.edu> - 2018-12-07 04:50 +0100
      Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 10:30 +0100
        Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 14:50 +0100
          Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 15:10 +0100
      Re: librecad Joe <joe@jretrading.com> - 2018-12-07 11:00 +0100
        Re: librecad "hdv@gmail" <hdv.jadev@gmail.com> - 2018-12-07 11:30 +0100
  Re: librecad "Jeremy Nicoll" <jn.ml.dbn.25@letterboxes.org> - 2018-12-07 07:50 +0100
    Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-07 14:50 +0100
      Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 16:20 +0100
        Re: librecad Erik Christiansen <dvalin@internode.on.net> - 2018-12-08 03:00 +0100
          Re: librecad Gene Heskett <gheskett@shentel.net> - 2018-12-08 04:30 +0100
        Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-08 04:50 +0100
    Re: librecad John Hasler <jhasler@newsguy.com> - 2018-12-07 15:10 +0100

csiph-web