Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault

From	Aurelien Jarno <aurel32@debian.org>
Newsgroups	linux.debian.bugs.dist, linux.debian.kernel
Subject	Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault
Date	2025-02-22 12:10 +0100
Message-ID	<KiVyq-17Th-11@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Cross-posted to 2 groups.

Show all headers | View raw

Package: src:linux
Version: 6.13.3-1~exp1
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: debian-riscv@lists.debian.org

Hi,

Starting with version 6.13.3-1~exp1, the riscv64 kernel is shipped as a
EFI binary with the payload compressed with zstd (using the EFI_ZBOOT
config option). In addition to breaking non-EFI systems, this change
simply prevents the kernel to boot on a VisionFive 2 board:

| Loading Linux 6.13-riscv64 ...
| Loading initial ramdisk ...
| EFI stub: Decompressing Linux Kernel...
| Unhandled exception: Store/AMO access fault
| EPC: 00000000fb64a6ea RA: 00000000fb64a6da TVAL: 0000000040020020
| EPC: 000000003b9046ea RA: 000000003b9046da reloc adjusted
| 
| Code: 0506 9526 4783 0015 4703 0005 3583 ed84 (0e23 fef9)
| UEFI image [0x00000000fe6aa000:0x00000000fe6d0fff] '/efi\boot\bootriscv64.efi'
| UEFI image [0x00000000fb646000:0x00000000fbe933ff] pc=0x46ea
| 
| 
| resetting ...
| reset not supported yet
| ### ERROR ### Please RESET the board ###

Regards
Aurelien


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
Device Tree model: StarFive VisionFive 2 v1.2A

** PCI devices:
0000:00:00.0 PCI bridge [0604]: PLDA XpressRich-AXI Ref Design [1556:1111] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 38
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: 30000000-300fffff [size=1M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

0000:01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
	Subsystem: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller [1106:3483]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 67
	Region 0: Memory at 30000000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

0001:00:00.0 PCI bridge [0604]: PLDA XpressRich-AXI Ref Design [1556:1111] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 53
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: 38000000-380fffff [size=1M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

0001:01:00.0 Non-Volatile memory controller [0108]: Silicon Motion, Inc. SM2263EN/SM2263XT (DRAM-less) NVMe SSD Controllers [126f:2263] (rev 03) (prog-if 02 [NVM Express])
	Subsystem: Silicon Motion, Inc. SM2263EN/SM2263XT (DRAM-less) NVMe SSD Controllers [126f:2263]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at 38000000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: nvme
	Kernel modules: nvme


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2/50 Kyson


-- System Information:
Debian Release: trixie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: riscv64

Kernel: Linux 6.13-rc7-riscv64 (SMP w/4 CPU threads)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.13-riscv64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.145
ii  kmod                                    33+20240816-2
ii  linux-base                              4.11

Versions of packages linux-image-6.13-riscv64 recommends:
ii  apparmor  3.1.7-1+b3

Versions of packages linux-image-6.13-riscv64 suggests:
pn  debian-kernel-handbook  <none>
pn  firmware-linux-free     <none>
pn  linux-doc-6.13          <none>

Versions of packages linux-image-6.13-riscv64 is related to:
pn  firmware-amd-graphics      <none>
pn  firmware-atheros           <none>
pn  firmware-bnx2              <none>
pn  firmware-bnx2x             <none>
pn  firmware-brcm80211         <none>
pn  firmware-cavium            <none>
pn  firmware-cirrus            <none>
pn  firmware-intel-graphics    <none>
pn  firmware-intel-misc        <none>
pn  firmware-intel-sound       <none>
pn  firmware-ipw2x00           <none>
pn  firmware-ivtv              <none>
pn  firmware-iwlwifi           <none>
pn  firmware-libertas          <none>
pn  firmware-marvell-prestera  <none>
pn  firmware-mediatek          <none>
pn  firmware-misc-nonfree      <none>
pn  firmware-myricom           <none>
pn  firmware-netronome         <none>
pn  firmware-netxen            <none>
pn  firmware-nvidia-graphics   <none>
pn  firmware-qcom-soc          <none>
pn  firmware-qlogic            <none>
pn  firmware-realtek           <none>
pn  firmware-samsung           <none>
pn  firmware-siano             <none>
pn  firmware-ti-connectivity   <none>
pn  xen-hypervisor             <none>

-- no debconf information

Back to linux.debian.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Aurelien Jarno <aurel32@debian.org> - 2025-02-22 12:10 +0100
  Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Bastian Blank <waldi@debian.org> - 2025-02-23 22:30 +0100
    Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Aurelien Jarno <aurel32@debian.org> - 2025-02-23 22:50 +0100
      Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Bastian Blank <waldi@debian.org> - 2025-02-24 20:30 +0100
  Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Bastian Blank <waldi@debian.org> - 2025-02-24 22:40 +0100
  Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault "Diederik de Haas" <didi.debian@cknow.org> - 2025-02-26 13:20 +0100
  Processed: Re: Bug#1098661: linux: fails to boot on VisionFive 2:  Unhandled exception: Store/AMO access fault "Debian Bug Tracking System" <owner@bugs.debian.org> - 2025-02-26 21:50 +0100
  Bug#1098661: linux: fails to boot on VisionFive 2: Unhandled exception: Store/AMO access fault Bastian Blank <waldi@debian.org> - 2025-02-26 21:50 +0100
  Bug#1098661: fixed in linux 6.13.5-1~exp1 Salvatore Bonaccorso <carnil@debian.org> - 2025-02-28 21:20 +0100

csiph-web