Re: Comparing phase of physically distant signals

From	Joerg <invalid@invalid.invalid>
Newsgroups	comp.arch.embedded, sci.electronics.design, comp.realtime
Subject	Re: Comparing phase of physically distant signals
Date	2013-08-03 12:44 -0700
Organization	Consultant
Message-ID	<b654s9Ff331U1@mid.individual.net> (permalink)
References	<kticf7$hg3$1@speranza.aioe.org> <b64l99Fbo0nU1@mid.individual.net> <ktjkf9$qe2$1@speranza.aioe.org>

Cross-posted to 3 groups.

Show all headers | View raw

Don Y wrote:
> Hi Joerg,
> 
> On 8/3/2013 8:17 AM, Joerg wrote:
>> Don Y wrote:
>>> I synchronize the "clocks" on physically distributed processors
>>> such that two or more different machines can have a very finely
>>> defined sense of "synchronized time" between themselves.
>>>
>>> During development, I would measure this time skew (among other
>>> factors) by locating these devices side-by-side on a workbench
>>> interconnected by "unquantified" cable.  Then, measuring the
>>> time difference between to "pulse outputs" that I artificially
>>> generate on each board.
>>>
>>> So, I could introduce a disturbance to the system and watch to
>>> see how quickly -- and accurately -- the "clocks" (think FLL and
>>> PLL) come back into sync.
>>>
>>> How do I practically do this when the devices are *deployed*
>>> and physically distant (vs. "electrically distant" as in my
>>> test case)?
>>>
>>> Two ideas come to mind:
>>> 1) two equal length cables to connect the "pulse outputs"
>>> from their respective originating devices to the test gear.
>>
>> Installers will hate this.
> 
> Exactly.  Imagine point A and point B are on different floors
> in different buildings, etc.  "Hey, Tony, head out to the truck
> and fetch the REALLY REALLY REALLY LONG cable set..."
> 
> (Then, *deploying* those cables -- even if only for an hour or so)
> 

No to mention the Motrin they will need for the back pain from
schlepping that cable drum up three flights of stairs.


>>> 2) two *radios* to do the same thing -- after accounting
>>> for different flight times
>>
>> Installers will love this. But why different flight times? Where is this
>> stuff going to be located? Down a borehole?
> 
> If you are measuring at a third point (without knowing its
> distance/ToF from each of the other two points -- cuz you
> have no reference you can rely upon!), then you need to
> know the difference "in time" from the "reference output"
> on each device, *through* the respective radio, through the
> "air" and into the "receiver" -- before it can be applied
> to some bit of test kit.
> 

If it absolutely has to be done from a separate console at a third point
you can have it measure the ToF automatically in both directions. Or
triangulate. AFAIU you don't need a reference, you can just pick on of
the units as reference.


>>> [Though I wonder how hard it is to qualify two different
>>> radios to have the same delay, etc.  Far easier to trim
>>> two long lengths of wire to the same length!]
>>
>> Aside from using GPS, WWV or some other reliable transmitter you could
>> have a very stable oscillator on each module. Such as a TCXO. Then you
>> have a transceiver on each. You perform a loopback echo locally, via an
>> RF switch. That gives you the latency of each radio (should be pretty
>> much the same for each module). Now only the path adds in which should
>> normally be reciprocal.
> 
> [I don't want this to be a recurring cost.  So, the radio is
> a "bag" attached solely for testing/calibration/troubleshooting]
> 

Then it's even easier because you can have calibrated radios of higher
quality. Why not ditch the third point and have the installer do it
while next to one unit?


> You still don't know what the difference in the propagation
> (through air) from each transceiver.
> 

With calibrated radios that's a piece of cake to find out. Pulse-echo.
Or let the whole link oscillate.


> I.e., if the distance to device 1 is A and the distance to device 2
> is B, then there will be a difference between the signals arriving
> that corresponds to the difference between A and B.  Even after you
> compensate for any differences in the radios themselves.
> 
> [The same is true with a single radio at device 1 "received" at
> device 2 -- how much time did the RF signal take to get to device
> 2 cuz it's arrival will occur after device 2's notion of the
> device 1 event with which it is intended to correlate.]
> 
> That's the appeal between "two equal lengths of wire" -- the
> delay through each can be made "identical".
> 

But radio can measure them. How much precision do you need?

[...]

-- 
Regards, Joerg

http://www.analogconsultants.com/

Thread

Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 00:45 -0700
  Re: Comparing phase of physically distant signals Jan Panteltje <pNaonStpealmtje@yahoo.com> - 2013-08-03 07:51 +0000
  Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 09:58 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 13:21 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 12:16 +0100
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 11:56 -0700
        Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:17 +0100
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 13:41 -0700
            Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 22:46 +0100
              Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 14:57 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 23:09 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 13:58 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 12:30 +0100
    Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 16:08 +0300
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 14:22 +0100
        Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-03 16:38 +0300
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 10:46 -0700
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 10:40 -0700
        Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:04 +0100
        Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 15:55 +0200
          Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-04 19:42 +0300
            Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 21:08 +0200
              Re: Comparing phase of physically distant signals upsidedown@downunder.com - 2013-08-05 15:28 +0300
                Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-05 22:17 +0200
                Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-05 23:20 -0400
    Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 14:26 +0100
    Re: Comparing phase of physically distant signals George Neuner <gneuner2@comcast.net> - 2013-08-03 14:47 -0400
  Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 08:17 -0700
    Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:08 -0700
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:37 +0100
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:57 -0700
          Re: Comparing phase of physically distant signals Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2013-08-04 15:58 +0200
      Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 12:44 -0700
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 18:36 -0700
          Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-04 09:56 -0700
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 14:53 -0700
              Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-05 15:38 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 01:25 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-07 08:06 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-07 09:21 -0700
  Re: Comparing phase of physically distant signals josephkk <joseph_barrett@sbcglobal.net> - 2013-08-03 15:40 +0000
    Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 10:05 -0700
      Re: Comparing phase of physically distant signals John S <Sophi.2@invalid.org> - 2013-08-03 12:13 -0500
        Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 10:26 -0700
          Re: Comparing phase of physically distant signals John S <Sophi.2@invalid.org> - 2013-08-03 12:51 -0500
            Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 11:54 -0700
              Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-03 20:27 +0100
                Re: Comparing phase of physically distant signals George Neuner <gneuner2@comcast.net> - 2013-08-05 03:26 -0400
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-05 10:34 +0100
                Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-05 23:29 -0400
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 08:53 +0100
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:49 -0700
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:34 -0700
      Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 12:18 -0700
        Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 12:52 -0700
          Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 13:21 -0700
            Re: Comparing phase of physically distant signals Jeff Liebermann <jeffl@cruzio.com> - 2013-08-03 13:31 -0700
              Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-03 14:46 -0700
                Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 15:03 -0700
                Re: Comparing phase of physically distant signals Jeff Liebermann <jeffl@cruzio.com> - 2013-08-03 17:25 -0700
            Re: Comparing phase of physically distant signals Joerg <invalid@invalid.invalid> - 2013-08-03 14:50 -0700
    Re: Comparing phase of physically distant signals "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2013-08-04 11:06 +0100
  Re: Comparing phase of physically distant signals John Larkin <jjlarkin@highNOTlandTHIStechnologyPART.com> - 2013-08-03 11:47 -0700
  Re: Comparing phase of physically distant signals Richard Damon <Richard@Damon-Family.org> - 2013-08-03 18:23 -0400
  Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-05 16:53 +0100
    Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 13:19 -0700
      Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 00:27 +0100
        Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-05 20:09 -0700
          Re: Comparing phase of physically distant signals Paul Rubin <no.email@nospam.invalid> - 2013-08-05 22:12 -0700
            Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 09:12 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 01:47 -0700
              Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 10:08 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:25 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:48 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 10:49 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 03:06 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 11:57 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 10:28 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 21:52 +0100
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 01:34 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 09:46 +0100
              Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-06 07:22 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 10:42 -0700
                Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-06 23:04 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 23:50 -0700
                Re: Comparing phase of physically distant signals Les Cargill <lcargill99@comcast.com> - 2013-08-07 13:05 -0500
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 18:22 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-08 09:35 +0100
              Re: Comparing phase of physically distant signals Paul Rubin <no.email@nospam.invalid> - 2013-08-06 22:18 -0700
                Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-07 03:09 -0700
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 12:39 +0100
                Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-07 13:18 +0100
          Re: Comparing phase of physically distant signals Tom Gardner <spamjunk@blueyonder.co.uk> - 2013-08-06 09:23 +0100
            Re: Comparing phase of physically distant signals Don Y <this@isnotme.com> - 2013-08-06 02:02 -0700
          Re: Comparing phase of physically distant signals "Paul E. Bennett" <Paul_E.Bennett@topmail.co.uk> - 2013-08-06 09:49 +0100
  Re: Comparing phase of physically distant signals Paul E Bennett <Paul_E.Bennett@topmail.co.uk> - 2013-08-16 21:07 +0100

csiph-web