Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #13651 > unrolled thread

VO installation

Started byPilks <richardp@lukhozi.co.za>
First post2022-10-10 07:46 -0700
Last post2022-10-11 14:57 +0200
Articles 10 — 5 participants

Back to article view | Back to comp.lang.clipper.visual-objects


Contents

  VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-10 07:46 -0700
    Re: VO installation JohnMartens <martens@tennishulp.info> - 2022-10-10 18:12 +0200
      Re: VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-10 09:17 -0700
        Re: VO installation JohnMartens <martens@tennishulp.info> - 2022-10-10 22:09 +0200
    Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-11 09:08 +0200
      Re: VO installation Robert van der Hulst <rjvanderhulst@gmail.com> - 2022-10-11 08:35 -0700
        Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-12 09:04 +0200
          Re: VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-17 09:17 -0700
            Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-20 09:42 +0200
    Re: VO installation Franz Rachbauer <office@rachbauer.org> - 2022-10-11 14:57 +0200

#13651 — VO installation

FromPilks <richardp@lukhozi.co.za>
Date2022-10-10 07:46 -0700
SubjectVO installation
Message-ID<2741f3a7-8709-4fe0-8471-91a6976f5aa6n@googlegroups.com>
Hi All, Hoping one of you can assist.
I have my original VO installation CD (Ver. 2.7a) with the serial number.
The disk no longer reads on my optical drive.
I had to reset my PC so I copied the VO installation folder with sub folders.  And all my repositories.  I backed up all my AEFs as well.
Now I am trying to install VO.  Disk will not read
I copy the original installation folder across and all my repository folders.
The first run it indicates the repositorty is corrupted and exits.
I try to create a new repository: it only creates the file <repositpryname>.VoPrj and sits there.
If I exit and try to add that repository it indicates no Adam table (obviously because it has not created all the files for the new repository.
Any suggestions as how to proceed?
Anyone have a downloadable iso that I can mount and install from there?
Any assistance will be most appreciated.
Richard 

[toc] | [next] | [standalone]


#13652

FromJohnMartens <martens@tennishulp.info>
Date2022-10-10 18:12 +0200
Message-ID<ti1g99$o0kb$1@dont-email.me>
In reply to#13651
I think I just copied the full installed VO directory tree from an old 
PC to the new one and then it ran like it ran on the old one.

I'n not sure if it realy worked that way but you can give it a try

John


Op 10-10-2022 om 16:46 schreef Pilks:
> Hi All, Hoping one of you can assist.
> I have my original VO installation CD (Ver. 2.7a) with the serial number.
> The disk no longer reads on my optical drive.
> I had to reset my PC so I copied the VO installation folder with sub folders.  And all my repositories.  I backed up all my AEFs as well.
> Now I am trying to install VO.  Disk will not read
> I copy the original installation folder across and all my repository folders.
> The first run it indicates the repositorty is corrupted and exits.
> I try to create a new repository: it only creates the file <repositpryname>.VoPrj and sits there.
> If I exit and try to add that repository it indicates no Adam table (obviously because it has not created all the files for the new repository.
> Any suggestions as how to proceed?
> Anyone have a downloadable iso that I can mount and install from there?
> Any assistance will be most appreciated.
> Richard

[toc] | [prev] | [next] | [standalone]


#13653

FromPilks <richardp@lukhozi.co.za>
Date2022-10-10 09:17 -0700
Message-ID<c59e90f6-f0a4-4807-b885-9891897e11a9n@googlegroups.com>
In reply to#13652
John
That is basically what I explained I did.  I am now trying to find a fresh install to create a blank repository where I can restore all my AEFs to.
The copy did not work.  I do not know if I changed where the project files were stored and now it is looking in the default place?
Thanks for trying.
Richard
On Monday, 10 October 2022 at 18:12:33 UTC+2, JohnMartens wrote:
> I think I just copied the full installed VO directory tree from an old 
> PC to the new one and then it ran like it ran on the old one. 
> 
> I'n not sure if it realy worked that way but you can give it a try 
> 
> John 
> 
> 
> Op 10-10-2022 om 16:46 schreef Pilks:
> > Hi All, Hoping one of you can assist. 
> > I have my original VO installation CD (Ver. 2.7a) with the serial number. 
> > The disk no longer reads on my optical drive. 
> > I had to reset my PC so I copied the VO installation folder with sub folders. And all my repositories. I backed up all my AEFs as well. 
> > Now I am trying to install VO. Disk will not read 
> > I copy the original installation folder across and all my repository folders. 
> > The first run it indicates the repositorty is corrupted and exits. 
> > I try to create a new repository: it only creates the file <repositpryname>.VoPrj and sits there. 
> > If I exit and try to add that repository it indicates no Adam table (obviously because it has not created all the files for the new repository. 
> > Any suggestions as how to proceed? 
> > Anyone have a downloadable iso that I can mount and install from there? 
> > Any assistance will be most appreciated. 
> > Richard

[toc] | [prev] | [next] | [standalone]


#13654

FromJohnMartens <martens@tennishulp.info>
Date2022-10-10 22:09 +0200
Message-ID<ti1u68$o0kb$2@dont-email.me>
In reply to#13653
Can you put your project in exact the same place on the new PC as it was 
on the old PC ?


Op 10-10-2022 om 18:17 schreef Pilks:
> John
> That is basically what I explained I did.  I am now trying to find a fresh install to create a blank repository where I can restore all my AEFs to.
> The copy did not work.  I do not know if I changed where the project files were stored and now it is looking in the default place?
> Thanks for trying.
> Richard
> On Monday, 10 October 2022 at 18:12:33 UTC+2, JohnMartens wrote:
>> I think I just copied the full installed VO directory tree from an old
>> PC to the new one and then it ran like it ran on the old one.
>>
>> I'n not sure if it realy worked that way but you can give it a try
>>
>> John
>>
>>
>> Op 10-10-2022 om 16:46 schreef Pilks:
>>> Hi All, Hoping one of you can assist.
>>> I have my original VO installation CD (Ver. 2.7a) with the serial number.
>>> The disk no longer reads on my optical drive.
>>> I had to reset my PC so I copied the VO installation folder with sub folders. And all my repositories. I backed up all my AEFs as well.
>>> Now I am trying to install VO. Disk will not read
>>> I copy the original installation folder across and all my repository folders.
>>> The first run it indicates the repositorty is corrupted and exits.
>>> I try to create a new repository: it only creates the file <repositpryname>.VoPrj and sits there.
>>> If I exit and try to add that repository it indicates no Adam table (obviously because it has not created all the files for the new repository.
>>> Any suggestions as how to proceed?
>>> Anyone have a downloadable iso that I can mount and install from there?
>>> Any assistance will be most appreciated.
>>> Richard

[toc] | [prev] | [next] | [standalone]


#13655

From"Wolfgang Riedmann" <wriedmann@gmail.com>
Date2022-10-11 09:08 +0200
Message-ID<jqkj37FmnftU1@mid.individual.net>
In reply to#13651
Hi Richard,

if you copy your old installation to the exactly the same location as
the old one it should work.
This is true for all VO versions starting with 2.7 because it does not
uses the registry anymore.

Giving you an installation is a harder part (even if I have a lot of
installations on archive), because you need the correct service pack
and also to restore all configuration files and tools.

Wolfgang

Pilks wrote:

> Hi All, Hoping one of you can assist.
> I have my original VO installation CD (Ver. 2.7a) with the serial
> number.  The disk no longer reads on my optical drive.
> I had to reset my PC so I copied the VO installation folder with sub
> folders.  And all my repositories.  I backed up all my AEFs as well.
> Now I am trying to install VO.  Disk will not read I copy the
> original installation folder across and all my repository folders.
> The first run it indicates the repositorty is corrupted and exits.  I
> try to create a new repository: it only creates the file
> <repositpryname>.VoPrj and sits there.  If I exit and try to add that
> repository it indicates no Adam table (obviously because it has not
> created all the files for the new repository.  Any suggestions as how
> to proceed?  Anyone have a downloadable iso that I can mount and
> install from there?  Any assistance will be most appreciated.  Richard



-- 

[toc] | [prev] | [next] | [standalone]


#13657

FromRobert van der Hulst <rjvanderhulst@gmail.com>
Date2022-10-11 08:35 -0700
Message-ID<3a1adfcb-12b2-4667-854e-01b1810ff949n@googlegroups.com>
In reply to#13655
Wolfgang,

VO 2.7 uses an ActiveX component for the source code editor.
IIRC you will have to register that component (cmax40.dll )

Robert

> Hi Richard, 
> 
> if you copy your old installation to the exactly the same location as 
> the old one it should work. 
> This is true for all VO versions starting with 2.7 because it does not 
> uses the registry anymore. 
> 
> Giving you an installation is a harder part (even if I have a lot of 
> installations on archive), because you need the correct service pack 
> and also to restore all configuration files and tools. 
> 
> Wolfgang
> Pilks wrote: 
> 
> > Hi All, Hoping one of you can assist. 
> > I have my original VO installation CD (Ver. 2.7a) with the serial 
> > number. The disk no longer reads on my optical drive. 
> > I had to reset my PC so I copied the VO installation folder with sub 
> > folders. And all my repositories. I backed up all my AEFs as well. 
> > Now I am trying to install VO. Disk will not read I copy the 
> > original installation folder across and all my repository folders. 
> > The first run it indicates the repositorty is corrupted and exits. I 
> > try to create a new repository: it only creates the file 
> > <repositpryname>.VoPrj and sits there. If I exit and try to add that 
> > repository it indicates no Adam table (obviously because it has not 
> > created all the files for the new repository. Any suggestions as how 
> > to proceed? Anyone have a downloadable iso that I can mount and 
> > install from there? Any assistance will be most appreciated. Richard
> --

[toc] | [prev] | [next] | [standalone]


#13658

From"Wolfgang Riedmann" <wriedmann@gmail.com>
Date2022-10-12 09:04 +0200
Message-ID<jqn77kF4m6iU1@mid.individual.net>
In reply to#13657
Hi Robert,

ok, thank you very much!

I didn't knew that.

Wolfgang


Robert van der Hulst wrote:

> Wolfgang,
> 
> VO 2.7 uses an ActiveX component for the source code editor.
> IIRC you will have to register that component (cmax40.dll )
> 
> Robert
> 
> > Hi Richard, 
> > 
> > if you copy your old installation to the exactly the same location
> > as the old one it should work. 
> > This is true for all VO versions starting with 2.7 because it does
> > not uses the registry anymore. 
> > 
> > Giving you an installation is a harder part (even if I have a lot
> > of installations on archive), because you need the correct service
> > pack and also to restore all configuration files and tools. 
> > 
> > Wolfgang
> > Pilks wrote: 
> > 
> > > Hi All, Hoping one of you can assist. 
> > > I have my original VO installation CD (Ver. 2.7a) with the serial 
> > > number. The disk no longer reads on my optical drive. 
> > > I had to reset my PC so I copied the VO installation folder with
> > > sub folders. And all my repositories. I backed up all my AEFs as
> > > well.  Now I am trying to install VO. Disk will not read I copy
> > > the original installation folder across and all my repository
> > > folders.  The first run it indicates the repositorty is corrupted
> > > and exits. I try to create a new repository: it only creates the
> > > file <repositpryname>.VoPrj and sits there. If I exit and try to
> > > add that repository it indicates no Adam table (obviously because
> > > it has not created all the files for the new repository. Any
> > > suggestions as how to proceed? Anyone have a downloadable iso
> > > that I can mount and install from there? Any assistance will be
> > > most appreciated. Richard
> > --



-- 

[toc] | [prev] | [next] | [standalone]


#13660

FromPilks <richardp@lukhozi.co.za>
Date2022-10-17 09:17 -0700
Message-ID<e126b99b-ce9c-4326-a1a8-366e0d3075f3n@googlegroups.com>
In reply to#13658
Hi All
Thanks for the assistance and suggestions.  I was able to recover an image from my original CD by using another PC that had a CD drive (not DVD drive).  
I have installed the VO27 from the image.  It does not seem to load, hangs on the splash screen.  Then I kill it in task manager.  And it loads to where you select the default project.  Then it hangs there.  I am using win 10 PRO (64bit).  Does that affect it in any way?
Do you suggest I patch it again (I had patched it to 27b before).  
If so where can I now find the patch files to do so? Wolfgang, do you have the patch files in your site?
Would a recopy of the bin files from my backup solve the patching?
Sorry to blast all these questions at you but I have a project that has to be maintained for another year.  Just trying to get to a point where I can open the repository.
Regards Richard

On Wednesday, 12 October 2022 at 09:04:23 UTC+2, Wolfgang Riedmann wrote:
> Hi Robert, 
> 
> ok, thank you very much! 
> 
> I didn't knew that. 
> 
> Wolfgang
> Robert van der Hulst wrote: 
> 
> > Wolfgang, 
> > 
> > VO 2.7 uses an ActiveX component for the source code editor. 
> > IIRC you will have to register that component (cmax40.dll ) 
> > 
> > Robert 
> > 
> > > Hi Richard, 
> > > 
> > > if you copy your old installation to the exactly the same location 
> > > as the old one it should work. 
> > > This is true for all VO versions starting with 2.7 because it does 
> > > not uses the registry anymore. 
> > > 
> > > Giving you an installation is a harder part (even if I have a lot 
> > > of installations on archive), because you need the correct service 
> > > pack and also to restore all configuration files and tools. 
> > > 
> > > Wolfgang 

[toc] | [prev] | [next] | [standalone]


#13663

From"Wolfgang Riedmann" <wriedmann@gmail.com>
Date2022-10-20 09:42 +0200
Message-ID<jrccf3F6i7mU1@mid.individual.net>
In reply to#13660
Hello,

I would recommend the following:

- install VO 2.7 from your original source. That should also fix the
registration of the source code editor component.
- copy over the files from your old installation

Regarding the patch files: I have only patches for the builds 2741,
2757, 2772 and 2773.
2772 for example is from October 2006, so about 16 years old.

Wolfgang


Pilks wrote:

> Hi All
> Thanks for the assistance and suggestions.  I was able to recover an
> image from my original CD by using another PC that had a CD drive
> (not DVD drive).  I have installed the VO27 from the image.  It does
> not seem to load, hangs on the splash screen.  Then I kill it in task
> manager.  And it loads to where you select the default project.  Then
> it hangs there.  I am using win 10 PRO (64bit).  Does that affect it
> in any way?  Do you suggest I patch it again (I had patched it to 27b
> before).  If so where can I now find the patch files to do so?
> Wolfgang, do you have the patch files in your site?  Would a recopy
> of the bin files from my backup solve the patching?  Sorry to blast
> all these questions at you but I have a project that has to be
> maintained for another year.  Just trying to get to a point where I
> can open the repository.  Regards Richard
> 
> On Wednesday, 12 October 2022 at 09:04:23 UTC+2, Wolfgang Riedmann
> wrote:
> > Hi Robert, 
> > 
> > ok, thank you very much! 
> > 
> > I didn't knew that. 
> > 
> > Wolfgang
> > Robert van der Hulst wrote: 
> > 
> > > Wolfgang, 
> > > 
> > > VO 2.7 uses an ActiveX component for the source code editor. 
> > > IIRC you will have to register that component (cmax40.dll ) 
> > > 
> > > Robert 
> > > 
> > > > Hi Richard, 
> > > > 
> > > > if you copy your old installation to the exactly the same
> > > > location as the old one it should work. 
> > > > This is true for all VO versions starting with 2.7 because it
> > > > does not uses the registry anymore. 
> > > > 
> > > > Giving you an installation is a harder part (even if I have a
> > > > lot of installations on archive), because you need the correct
> > > > service pack and also to restore all configuration files and
> > > > tools.
> > > > 
> > > > Wolfgang 



-- 

[toc] | [prev] | [next] | [standalone]


#13656

FromFranz Rachbauer <office@rachbauer.org>
Date2022-10-11 14:57 +0200
Message-ID<ti3p83$qlf$1@gioia.aioe.org>
In reply to#13651
I can make and upload a Vo 2.7 Image if you need.
Franz

Am 10.10.2022 um 16:46 schrieb Pilks:
> Hi All, Hoping one of you can assist.
> I have my original VO installation CD (Ver. 2.7a) with the serial number.
> The disk no longer reads on my optical drive.
> I had to reset my PC so I copied the VO installation folder with sub folders.  And all my repositories.  I backed up all my AEFs as well.
> Now I am trying to install VO.  Disk will not read
> I copy the original installation folder across and all my repository folders.
> The first run it indicates the repositorty is corrupted and exits.
> I try to create a new repository: it only creates the file <repositpryname>.VoPrj and sits there.
> If I exit and try to add that repository it indicates no Adam table (obviously because it has not created all the files for the new repository.
> Any suggestions as how to proceed?
> Anyone have a downloadable iso that I can mount and install from there?
> Any assistance will be most appreciated.
> Richard

[toc] | [prev] | [standalone]


Back to top | Article view | comp.lang.clipper.visual-objects


csiph-web