Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.lang.clipper.visual-objects > #13658

Re: VO installation

From "Wolfgang Riedmann" <wriedmann@gmail.com>
Newsgroups comp.lang.clipper.visual-objects
Subject Re: VO installation
Date 2022-10-12 09:04 +0200
Message-ID <jqn77kF4m6iU1@mid.individual.net> (permalink)
References <2741f3a7-8709-4fe0-8471-91a6976f5aa6n@googlegroups.com> <jqkj37FmnftU1@mid.individual.net> <3a1adfcb-12b2-4667-854e-01b1810ff949n@googlegroups.com>

Show all headers | View raw


Hi Robert,

ok, thank you very much!

I didn't knew that.

Wolfgang


Robert van der Hulst wrote:

> Wolfgang,
> 
> VO 2.7 uses an ActiveX component for the source code editor.
> IIRC you will have to register that component (cmax40.dll )
> 
> Robert
> 
> > Hi Richard, 
> > 
> > if you copy your old installation to the exactly the same location
> > as the old one it should work. 
> > This is true for all VO versions starting with 2.7 because it does
> > not uses the registry anymore. 
> > 
> > Giving you an installation is a harder part (even if I have a lot
> > of installations on archive), because you need the correct service
> > pack and also to restore all configuration files and tools. 
> > 
> > Wolfgang
> > Pilks wrote: 
> > 
> > > Hi All, Hoping one of you can assist. 
> > > I have my original VO installation CD (Ver. 2.7a) with the serial 
> > > number. The disk no longer reads on my optical drive. 
> > > I had to reset my PC so I copied the VO installation folder with
> > > sub folders. And all my repositories. I backed up all my AEFs as
> > > well.  Now I am trying to install VO. Disk will not read I copy
> > > the original installation folder across and all my repository
> > > folders.  The first run it indicates the repositorty is corrupted
> > > and exits. I try to create a new repository: it only creates the
> > > file <repositpryname>.VoPrj and sits there. If I exit and try to
> > > add that repository it indicates no Adam table (obviously because
> > > it has not created all the files for the new repository. Any
> > > suggestions as how to proceed? Anyone have a downloadable iso
> > > that I can mount and install from there? Any assistance will be
> > > most appreciated. Richard
> > --



-- 

Back to comp.lang.clipper.visual-objects | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-10 07:46 -0700
  Re: VO installation JohnMartens <martens@tennishulp.info> - 2022-10-10 18:12 +0200
    Re: VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-10 09:17 -0700
      Re: VO installation JohnMartens <martens@tennishulp.info> - 2022-10-10 22:09 +0200
  Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-11 09:08 +0200
    Re: VO installation Robert van der Hulst <rjvanderhulst@gmail.com> - 2022-10-11 08:35 -0700
      Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-12 09:04 +0200
        Re: VO installation Pilks <richardp@lukhozi.co.za> - 2022-10-17 09:17 -0700
          Re: VO installation "Wolfgang Riedmann" <wriedmann@gmail.com> - 2022-10-20 09:42 +0200
  Re: VO installation Franz Rachbauer <office@rachbauer.org> - 2022-10-11 14:57 +0200

csiph-web