Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > alt.os.linux > #81319
| From | Paul <nospam@needed.invalid> |
|---|---|
| Newsgroups | alt.os.linux |
| Subject | Re: Hard disk error (testing usb-storage instead of UAS) |
| Date | 2025-04-08 18:38 -0400 |
| Organization | A noiseless patient Spider |
| Message-ID | <vt48hs$37980$1@dont-email.me> (permalink) |
| References | (10 earlier) <m5i68nF22mbU1@mid.individual.net> <vt17ch$fjv3$1@dont-email.me> <nh7eclxga6.ln2@Telcontar.valinor> <m5jsssFbl24U1@mid.individual.net> <0n7gclx6mh.ln2@Telcontar.valinor> |
On Tue, 4/8/2025 2:49 PM, Carlos E.R. wrote:
> On 2025-04-08 08:09, J.O. Aho wrote:
>> On 08/04/2025 02.34, Carlos E.R. wrote:
>>
>>> All the issues I have with this box appear to be caused by the firmware of the box. None seem to be caused on the Linux side of things.
>>
>> The workaround seems to be to degrade to the old USB behavior on the Linux side or flash a new firmware and hope it works.
>>
>> Come back after you done one or other.
>>
>
> <0.5> 2025-04-08T19:57:43.732682+02:00 Isengard kernel - - - [ T0] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.4.0-150600.23.42-default root=UUID=0d457df1-... showopts splash=verbose resume=/dev/disk/by-label/Swap verbose mitigations=auto usbstorage.quirks=152d:0578:u
>
> ...
>
> <0.6> 2025-04-08T19:59:29.396137+02:00 Isengard kernel - - - [ T9] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd
> <0.6> 2025-04-08T19:59:29.416175+02:00 Isengard kernel - - - [ T9] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 3.01
> <0.6> 2025-04-08T19:59:29.416230+02:00 Isengard kernel - - - [ T9] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> <0.6> 2025-04-08T19:59:29.416234+02:00 Isengard kernel - - - [ T9] usb 2-1: Product: External HDD
> <0.6> 2025-04-08T19:59:29.416237+02:00 Isengard kernel - - - [ T9] usb 2-1: Manufacturer: External USB3.0
> <0.6> 2025-04-08T19:59:29.416239+02:00 Isengard kernel - - - [ T9] usb 2-1: SerialNumber: 0000007788FC
> <0.6> 2025-04-08T19:59:29.420143+02:00 Isengard kernel - - - [ T9] usb-storage 2-1:1.0: USB Mass Storage device detected
> <0.6> 2025-04-08T19:59:29.420175+02:00 Isengard kernel - - - [ T9] usb-storage 2-1:1.0: Quirks match for vid 152d pid 0578: 1800000
> <0.6> 2025-04-08T19:59:29.420178+02:00 Isengard kernel - - - [ T9] scsi host6: usb-storage 2-1:1.0
> <1.6> 2025-04-08T19:59:29.441025+02:00 Isengard mtp-probe - - - checking bus 2, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> <1.6> 2025-04-08T19:59:29.441602+02:00 Isengard mtp-probe - - - bus: 2, device: 8 was not an MTP device
> <1.6> 2025-04-08T19:59:29.475720+02:00 Isengard mtp-probe - - - checking bus 2, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> <1.6> 2025-04-08T19:59:29.475976+02:00 Isengard mtp-probe - - - bus: 2, device: 8 was not an MTP device
> <0.5> 2025-04-08T19:59:30.456232+02:00 Isengard kernel - - - [ T41] scsi 6:0:0:0: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:30.456274+02:00 Isengard kernel - - - [ T41] scsi 6:0:0:1: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:30.456278+02:00 Isengard kernel - - - [ T41] scsi 6:0:0:2: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:30.456283+02:00 Isengard kernel - - - [ T41] scsi 6:0:0:3: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:30.456285+02:00 Isengard kernel - - - [ T41] sd 6:0:0:0: Attached scsi generic sg7 type 0
> <0.5> 2025-04-08T19:59:30.456287+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:30.456289+02:00 Isengard kernel - - - [ T41] sd 6:0:0:1: Attached scsi generic sg8 type 0
> <0.5> 2025-04-08T19:59:30.456291+02:00 Isengard kernel - - - [ T41] sd 6:0:0:2: Attached scsi generic sg9 type 0
> <0.5> 2025-04-08T19:59:30.456293+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:30.456295+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:30.456297+02:00 Isengard kernel - - - [ T41] scsi 6:0:0:3: Attached scsi generic sg10 type 0
> <0.5> 2025-04-08T19:59:30.456298+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Write Protect is off
> <0.7> 2025-04-08T19:59:30.456300+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:30.463175+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Disabling FUA
> <0.5> 2025-04-08T19:59:30.463216+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:30.463219+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:30.463221+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:30.463224+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:30.463226+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:30.463228+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:30.463230+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:30.463231+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:30.463233+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Write Protect is off
> <0.7> 2025-04-08T19:59:30.463234+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:30.463236+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Disabling FUA
> <0.5> 2025-04-08T19:59:30.463238+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:30.484172+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Write Protect is off
> <0.7> 2025-04-08T19:59:30.484208+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:30.484212+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Disabling FUA
> <0.5> 2025-04-08T19:59:30.484214+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:30.484216+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:30.484218+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:30.484220+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Write Protect is off
> <0.7> 2025-04-08T19:59:30.484221+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:30.484223+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Disabling FUA
> <0.5> 2025-04-08T19:59:30.484225+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:30.488218+02:00 Isengard kernel - - - [ T412] sd 6:0:0:0: [sdf] Attached SCSI disk
> <0.5> 2025-04-08T19:59:30.528130+02:00 Isengard kernel - - - [ T39] sd 6:0:0:2: [sdh] Attached SCSI disk
> <0.5> 2025-04-08T19:59:30.544181+02:00 Isengard kernel - - - [ T10] sd 6:0:0:1: [sdg] Attached SCSI disk
> <0.5> 2025-04-08T19:59:30.548130+02:00 Isengard kernel - - - [ T40] sd 6:0:0:3: [sdi] Attached SCSI disk
> <1.4> 2025-04-08T19:59:31.044839+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdh': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:31.045188+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdf': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:31.045344+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdi': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:31.056710+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdg': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <0.6> 2025-04-08T19:59:32.400127+02:00 Isengard kernel - - - [ T9] usb 2-3: new SuperSpeed USB device number 9 using xhci_hcd
> <0.6> 2025-04-08T19:59:32.420138+02:00 Isengard kernel - - - [ T9] usb 2-3: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 3.01
> <0.6> 2025-04-08T19:59:32.420174+02:00 Isengard kernel - - - [ T9] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> <0.6> 2025-04-08T19:59:32.420177+02:00 Isengard kernel - - - [ T9] usb 2-3: Product: External HDD
> <0.6> 2025-04-08T19:59:32.420180+02:00 Isengard kernel - - - [ T9] usb 2-3: Manufacturer: External USB3.0
> <0.6> 2025-04-08T19:59:32.420183+02:00 Isengard kernel - - - [ T9] usb 2-3: SerialNumber: 0000007788FC
> <0.6> 2025-04-08T19:59:32.428144+02:00 Isengard kernel - - - [ T9] usb-storage 2-3:1.0: USB Mass Storage device detected
> <0.6> 2025-04-08T19:59:32.428192+02:00 Isengard kernel - - - [ T9] usb-storage 2-3:1.0: Quirks match for vid 152d pid 0578: 1800000
> <0.6> 2025-04-08T19:59:32.428195+02:00 Isengard kernel - - - [ T9] scsi host7: usb-storage 2-3:1.0
> <1.6> 2025-04-08T19:59:32.441321+02:00 Isengard mtp-probe - - - checking bus 2, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3"
> <1.6> 2025-04-08T19:59:32.441561+02:00 Isengard mtp-probe - - - bus: 2, device: 9 was not an MTP device
> <1.6> 2025-04-08T19:59:32.474703+02:00 Isengard mtp-probe - - - checking bus 2, device 9: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3"
> <1.6> 2025-04-08T19:59:32.474934+02:00 Isengard mtp-probe - - - bus: 2, device: 9 was not an MTP device
> <0.5> 2025-04-08T19:59:33.460167+02:00 Isengard kernel - - - [ T40] scsi 7:0:0:0: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:33.460215+02:00 Isengard kernel - - - [ T40] scsi 7:0:0:1: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:33.460221+02:00 Isengard kernel - - - [ T40] scsi 7:0:0:2: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:33.460224+02:00 Isengard kernel - - - [ T40] scsi 7:0:0:3: Direct-Access External USB3.0 0301 PQ: 0 ANSI: 6
> <0.5> 2025-04-08T19:59:33.460226+02:00 Isengard kernel - - - [ T40] sd 7:0:0:0: Attached scsi generic sg11 type 0
> <0.5> 2025-04-08T19:59:33.460228+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:33.460230+02:00 Isengard kernel - - - [ T40] sd 7:0:0:1: Attached scsi generic sg12 type 0
> <0.5> 2025-04-08T19:59:33.460232+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:33.460234+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:33.460235+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Write Protect is off
> <0.7> 2025-04-08T19:59:33.460237+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:33.460238+02:00 Isengard kernel - - - [ T40] sd 7:0:0:2: Attached scsi generic sg13 type 0
> <0.5> 2025-04-08T19:59:33.460240+02:00 Isengard kernel - - - [ T40] sd 7:0:0:3: Attached scsi generic sg14 type 0
> <0.5> 2025-04-08T19:59:33.464177+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:33.464218+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:33.464221+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:33.464223+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Write Protect is off
> <0.7> 2025-04-08T19:59:33.464226+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:33.464227+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Disabling FUA
> <0.5> 2025-04-08T19:59:33.464229+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:33.464231+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:33.472155+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Disabling FUA
> <0.5> 2025-04-08T19:59:33.472196+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:33.484228+02:00 Isengard kernel - - - [ T39] sd 7:0:0:0: [sdj] Attached SCSI disk
> <0.5> 2025-04-08T19:59:33.484260+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:33.484264+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:33.484267+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Write Protect is off
> <0.7> 2025-04-08T19:59:33.484269+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:33.484271+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Disabling FUA
> <0.5> 2025-04-08T19:59:33.484393+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:33.484421+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Very big device. Trying to use READ CAPACITY(16).
> <0.5> 2025-04-08T19:59:33.484444+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
> <0.5> 2025-04-08T19:59:33.484461+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] 4096-byte physical blocks
> <0.5> 2025-04-08T19:59:33.488234+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Write Protect is off
> <0.7> 2025-04-08T19:59:33.488382+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Mode Sense: 47 00 00 08
> <0.5> 2025-04-08T19:59:33.488388+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Disabling FUA
> <0.5> 2025-04-08T19:59:33.488390+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> <0.5> 2025-04-08T19:59:33.508190+02:00 Isengard kernel - - - [ T4797] sd 7:0:0:2: [sdl] Attached SCSI disk
> <0.5> 2025-04-08T19:59:33.536129+02:00 Isengard kernel - - - [ T412] sd 7:0:0:3: [sdm] Attached SCSI disk
> <0.5> 2025-04-08T19:59:33.560145+02:00 Isengard kernel - - - [ T10] sd 7:0:0:1: [sdk] Attached SCSI disk
> <1.4> 2025-04-08T19:59:34.186210+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdl': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:34.192694+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdk': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:34.216776+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdm': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
> <1.4> 2025-04-08T19:59:34.227692+02:00 Isengard udisksd 2856 - - Error probing device: Error sending ATA command IDENTIFY DEVICE to '/dev/sdj': Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0)
>
>
> Disks are sdf to sdm.
>
> Isengard:~ # hdparm -i /dev/sdf
>
> /dev/sdf:
> HDIO_GET_IDENTITY failed: Invalid argument
> Isengard:~ #
>
> Same as before.
>
> Isengard:~ # l /dev/disk/by-id/ | grep sd[fghijklm]
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 ata-ST10000NT001-3LY101_WP022E9S -> ../../sdl
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 ata-ST10000NT001-3LY101_WP022JMK -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 scsi-SExternal_USB3.0_0000007788FC -> ../../sdf
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 usb-External_USB3.0_0000007788FC-0:0 -> ../../sdf
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 usb-External_USB3.0_0000007788FC-0:1 -> ../../sdg
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 usb-External_USB3.0_0000007788FC-0:2 -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 usb-External_USB3.0_0000007788FC-0:3 -> ../../sdi
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 wwn-0x5000c500faa885cf -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 wwn-0x5000c500faa9884b -> ../../sdl
> Isengard:~ #
>
> As you can see, not every disk is identified, and those that are do not have all the methods.
>
>
> Isengard:~ # l /dev/disk/by-path/ | grep sd[fghijklm]
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-scsi-0:0:0:1 -> ../../sdg
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-scsi-0:0:0:2 -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-scsi-0:0:0:3 -> ../../sdi
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:1:1.0-scsi-0:0:0:0 -> ../../sdf
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:1:1.0-scsi-0:0:0:1 -> ../../sdg
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:1:1.0-scsi-0:0:0:2 -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:1:1.0-scsi-0:0:0:3 -> ../../sdi
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:3:1.0-scsi-0:0:0:0 -> ../../sdj
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:3:1.0-scsi-0:0:0:1 -> ../../sdk
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:3:1.0-scsi-0:0:0:2 -> ../../sdl
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usb-0:3:1.0-scsi-0:0:0:3 -> ../../sdm
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:1:1.0-scsi-0:0:0:0 -> ../../sdf
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:1:1.0-scsi-0:0:0:1 -> ../../sdg
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:1:1.0-scsi-0:0:0:2 -> ../../sdh
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:1:1.0-scsi-0:0:0:3 -> ../../sdi
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:3:1.0-scsi-0:0:0:0 -> ../../sdj
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:3:1.0-scsi-0:0:0:1 -> ../../sdk
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:3:1.0-scsi-0:0:0:2 -> ../../sdl
> lrwxrwxrwx 1 root root 9 Apr 8 19:59 pci-0000:00:14.0-usbv3-0:3:1.0-scsi-0:0:0:3 -> ../../sdm
> Isengard:~ #
>
> There should be 8 entries for each identification method, one of them is incomplete.
>
> So, there is no advantage for using usb-storage instead of UAS, as I thought.
>
>
>
> The good news is that the names like pci-0000:00:14.0-usbv3-0:3:1.0-scsi-0:0:0:1 hold across boots referring to the same serial name. They do not hold if a disk is removed, the list is then recreated. It appears that the names hold as long as the disks are untouched. This is not affected by the quircks change.
>
>
> I obtain the serial number with this script:
>
> +++·····················
> Isengard:~ # cat /root/bin/YottamasterSerialNumber
> #!/bin/bash
>
> if [ $# -eq 0 ]; then
> echo "Gets the serial number of a device from SMART data. Ask only one disk at a time (Yotta bug)"
> exit
> fi
>
> THEDISK=$1
>
> # Ask twice, the first one is a cached answer that has to be disregarded.
> smartctl -d sat -a $THEDISK | grep "Serial Number" 1>/dev/null
> smartctl -d sat -a $THEDISK | grep "Serial Number"
>
>
>
> Isengard:~ #
> ·····················++-
>
The log makes it sound like it is using a smaller CDB definition for some
commands, and then switches to the 16 byte CDB when it finds a "very big device".
I found this in a Google:
"48 bits are for toys. SCSI's 16-byte CDBs use 64-bit logical block addresses. This has been the case
since the 1990s, and implementing the read(16) and write(16) commands has been mandatory for
DASD targets since the turn of the century. As I wrote a decade ago this puts the maximum size supported
by the SCSI protocol in the ZiBs. - JdeBP Apr 15, 2015 at 16:11"
I'd expect both BOT and UAS to use CDBs and the SCSI stack,
because as far as I know, that's what is used for "foreign devices".
Anything which was not a ribbon cable (in the old days), or is not
SATA in the current era, will likely see CDBs used. They're also
used (Mode Sense) for optical drives.
If it supports 16 byte CDB, it should be using it always.
The advantage of BOT over UAS, was BOT was supposed to work, and
UAS was not supposed to work. For some definition of the correct
firmware version.
Paul
Back to alt.os.linux | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-03 22:01 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-03 17:47 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 02:39 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-03 23:33 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 11:36 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 12:16 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-04 14:51 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 21:52 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Java Jive <java@evij.com.invalid> - 2025-04-04 11:28 +0100
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 12:47 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Java Jive <java@evij.com.invalid> - 2025-04-04 17:06 +0100
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 19:09 +0200
Re: Amazon (Was: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "J.O. Aho" <user@example.net> - 2025-04-04 21:26 +0200
Re: Amazon (Was: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Mark Lloyd <not.email@all.invalid> - 2025-04-05 16:22 +0000
Re: Amazon (Was: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 21:01 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-06 14:44 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) vallor <vallor@cultnix.org> - 2025-04-04 06:30 +0000
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-04 03:53 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 12:53 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 13:44 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 23:40 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 13:33 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 18:23 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 21:04 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 12:15 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-04 16:30 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-04 22:52 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-04 18:46 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Java Jive <java@evij.com.invalid> - 2025-04-05 00:20 +0100
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-04 23:05 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 12:47 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Java Jive <java@evij.com.invalid> - 2025-04-05 14:14 +0100
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 18:23 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-06 00:13 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Simon <SimonJ@eu.invalid> - 2025-04-07 09:42 +0000
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-07 14:07 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "J.O. Aho" <user@example.net> - 2025-04-07 16:37 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-07 15:00 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-08 02:34 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-08 00:05 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "J.O. Aho" <user@example.net> - 2025-04-08 08:09 +0200
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Java Jive <java@evij.com.invalid> - 2025-04-08 11:16 +0100
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) Paul <nospam@needed.invalid> - 2025-04-08 09:39 -0400
Re: Hard disk error (testing usb-storage instead of UAS) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-08 20:49 +0200
Re: Hard disk error (testing usb-storage instead of UAS) Paul <nospam@needed.invalid> - 2025-04-08 18:38 -0400
Re: Hard disk error (Error probing device: Error sending ATA command IDENTIFY DEVICE) "Carlos E.R." <robin_listas@es.invalid> - 2025-04-05 22:03 +0200
csiph-web