Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > alt.comp.os.windows-xp > #8731 > unrolled thread
| Started by | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| First post | 2026-11-16 04:42 +0200 |
| Last post | 2026-11-17 05:44 +0200 |
| Articles | 16 — 8 participants |
Back to article view | Back to alt.comp.os.windows-xp
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-16 04:42 +0200
Re: Printer Recommendation Lars Poulsen <lars@beagle-ears.com> - 2026-11-15 19:11 -0800
Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-16 15:30 +0200
Re: Printer Recommendation Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> - 2026-11-17 03:04 +0800
Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-17 05:41 +0200
Re: Printer Recommendation "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 11:54 +0100
Re: Printer Recommendation Paul <nospam@needed.invalid> - 2026-11-17 09:42 -0500
Re: Printer Recommendation "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 22:01 +0100
Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-18 05:03 +0200
Re: Printer Recommendation Mark Lloyd <nomail@here.invalid> - 2026-11-16 15:38 +0000
Re: Printer Recommendation Anton Antimo <anton@safunu.org> - 2026-11-17 09:51 -0300
Re: Printer Recommendation Mark Lloyd <nomail@here.invalid> - 2026-11-17 16:06 +0000
Re: Printer Recommendation Paul <nospam@needed.invalid> - 2026-11-15 22:39 -0500
Re: Printer Recommendation "R.Wieser" <address@is.invalid> - 2026-11-16 17:43 +0100
Re: Printer Recommendation "R.Wieser" <address@is.invalid> - 2026-11-16 17:46 +0100
Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-17 05:44 +0200
| From | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| Date | 2026-11-16 04:42 +0200 |
| Subject | Re: Printer Recommendation |
| Message-ID | <1mqkflt02a68ijbvr3gq9bv4hba5jgqbfo@4ax.com> |
On Sun, 15 Nov 2026 15:29:25 -0400, Maria Sophia <mariasophia@comprehension.com> wrote: >On that basis, the machines worth looking at are all Brother mono lasers, >because Brother is the last big vendor whose toner carts are a plastic >hopper with a fill plug and a mechanical reset gear rather than a chip and >an e-fuse. HP and Samsung went to chips years ago, which is why they are >the wrong answer for this problem set, in my humblest of opinions. I have a Brother HL-1210W which has just stopped working. When I bought it the major advantage was that the ink cartridge was separate from the roller. It said that the ink cartridge could do 1000 pages, and the roller 10000. For some time now it has been warning me that the roller needs replacing, but I haven't noticed any decrease in print quality, so I've put off replacing it. But now when I switch it on, it makes a clicking sound, but doesn't run its startup routine, and then a red ligh flashes. Sometimes seitching it on and off at the wall plug got it to start up properly, but now it mostly doesn't. Is this something the could be fixed by getting a new roller? I'm pretty sure it would cost more than getting a new printer, but I'm reluctant to get a new printer because it might be one of the "phone home" models, and also might not have drivers for my Windows XP and Windows 10 32-bit printers. -- Steve Hayes from Tshwane, South Africa Web: http://www.khanya.org.za/stevesig.htm Blog: http://methodius.blogspot.com E-mail - see web page, or parse: shayes at dunelm full stop org full stop uk
[toc] | [next] | [standalone]
| From | Lars Poulsen <lars@beagle-ears.com> |
|---|---|
| Date | 2026-11-15 19:11 -0800 |
| Message-ID | <11dds91$38t30$1@dont-email.me> |
| In reply to | #8731 |
On 11/15/2026 18:42, Steve Hayes wrote:
> On Sun, 15 Nov 2026 15:29:25 -0400, Maria Sophia
> <mariasophia@comprehension.com> wrote:
>
>> On that basis, the machines worth looking at are all Brother mono lasers,
>> because Brother is the last big vendor whose toner carts are a plastic
>> hopper with a fill plug and a mechanical reset gear rather than a chip and
>> an e-fuse. HP and Samsung went to chips years ago, which is why they are
>> the wrong answer for this problem set, in my humblest of opinions.
>
> I have a Brother HL-1210W which has just stopped working.
>
> When I bought it the major advantage was that the ink cartridge was
> separate from the roller. It said that the ink cartridge could do 1000
> pages, and the roller 10000.
>
> For some time now it has been warning me that the roller needs
> replacing, but I haven't noticed any decrease in print quality, so
> I've put off replacing it.
>
> But now when I switch it on, it makes a clicking sound, but doesn't
> run its startup routine, and then a red ligh flashes. Sometimes
> seitching it on and off at the wall plug got it to start up properly,
> but now it mostly doesn't.
>
> Is this something the could be fixed by getting a new roller? I'm
> pretty sure it would cost more than getting a new printer, but I'm
> reluctant to get a new printer because it might be one of the "phone
> home" models, and also might not have drivers for my Windows XP and
> Windows 10 32-bit printers.
Not only is the HL-1210W discontinued,, the consumables (toner and
drums) are apparently discontinued as well. So you have to buy a new
printer. You must have had it for at least 10 years, so do not feel bad
about it.
I have an HL-2320-D which is working OK. I had to replace the drum once.
There is a WiFi model also. With WiFi, it costs $125 at Walmart. Without
WiFi it costs $320 at Amazon according to Google search results. These
do two-sided printing (D for Duplex).
There is a very similar model Xerox B230 for $159 from Amazon - I have a
previous version of that. It has WiFi and duplexing. The drum and toner
are separate in this one too.
Monochrome lasers are affordable and generally reliable. Color lasers in
contrast are quite expensive.
---
PS: Did you know my long ago friend Jim Snell? I seem to remember he
mentioned you.
--
Lars Poulsen - an old geek in Santa Barbara, California
[toc] | [prev] | [next] | [standalone]
| From | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| Date | 2026-11-16 15:30 +0200 |
| Message-ID | <vu0mfl9cciqvjtlhq1biidcfbn891h6qhf@4ax.com> |
| In reply to | #8732 |
On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen <lars@beagle-ears.com> wrote: >On 11/15/2026 18:42, Steve Hayes wrote: >> I have a Brother HL-1210W which has just stopped working. >> >> When I bought it the major advantage was that the ink cartridge was >> separate from the roller. It said that the ink cartridge could do 1000 >> pages, and the roller 10000. >> >> For some time now it has been warning me that the roller needs >> replacing, but I haven't noticed any decrease in print quality, so >> I've put off replacing it. >> >> But now when I switch it on, it makes a clicking sound, but doesn't >> run its startup routine, and then a red ligh flashes. Sometimes >> seitching it on and off at the wall plug got it to start up properly, >> but now it mostly doesn't. >> >> Is this something the could be fixed by getting a new roller? I'm >> pretty sure it would cost more than getting a new printer, but I'm >> reluctant to get a new printer because it might be one of the "phone >> home" models, and also might not have drivers for my Windows XP and >> Windows 10 32-bit printers. > >Not only is the HL-1210W discontinued,, the consumables (toner and >drums) are apparently discontinued as well. So you have to buy a new >printer. You must have had it for at least 10 years, so do not feel bad >about it. The toner is very easily obtainable -- the TN1000 cartridge fits several different Brother models, and whenever I go to buy a new one there is a big pile of them in the shop, so they are quite popular. I'm not so sure about the drum, as I've never had to replace that before. -- Steve Hayes from Tshwane, South Africa Web: http://www.khanya.org.za/stevesig.htm Blog: http://methodius.blogspot.com E-mail - see web page, or parse: shayes at dunelm full stop org full stop uk
[toc] | [prev] | [next] | [standalone]
| From | Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> |
|---|---|
| Date | 2026-11-17 03:04 +0800 |
| Message-ID | <atIKS.634$GC2.192@fx09.ams4> |
| In reply to | #8734 |
On 11/16/2026 9:30 PM, Steve Hayes wrote: > On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen > <lars@beagle-ears.com> wrote: > >> On 11/15/2026 18:42, Steve Hayes wrote: > >>> I have a Brother HL-1210W which has just stopped working. >>> >>> When I bought it the major advantage was that the ink cartridge was >>> separate from the roller. It said that the ink cartridge could do 1000 >>> pages, and the roller 10000. >>> >>> For some time now it has been warning me that the roller needs >>> replacing, but I haven't noticed any decrease in print quality, so >>> I've put off replacing it. >>> >>> But now when I switch it on, it makes a clicking sound, but doesn't >>> run its startup routine, and then a red ligh flashes. Sometimes >>> seitching it on and off at the wall plug got it to start up properly, >>> but now it mostly doesn't. >>> >>> Is this something the could be fixed by getting a new roller? I'm >>> pretty sure it would cost more than getting a new printer, but I'm >>> reluctant to get a new printer because it might be one of the "phone >>> home" models, and also might not have drivers for my Windows XP and >>> Windows 10 32-bit printers. >> >> Not only is the HL-1210W discontinued,, the consumables (toner and >> drums) are apparently discontinued as well. So you have to buy a new >> printer. You must have had it for at least 10 years, so do not feel bad >> about it. > > The toner is very easily obtainable -- the TN1000 cartridge fits > several different Brother models, and whenever I go to buy a new one > there is a big pile of them in the shop, so they are quite popular. > > I'm not so sure about the drum, as I've never had to replace that > before. > > I have. If I remember correctly, the symptom is partial printing on the page. Like, vertical blank lines throughout. Also, the machine will complain -- well, my Brother machine -- about replacing the drum every time you replace the toner, requiring a secret code [1] entered into the settings menu to bypass it, once it's "time" to replace the drum. If the machine isn't complaining, and there are no printing artifacts you can't explain, then you probably haven't had the need to replace the drum yet. I get my drums from the same place I get my toner, so that part is easy. Best wishes, and happy printing! [1] Like in a video game. -- Johann | email: invalid -> com | http://www.myrkraverk.com/blog/ I'm not from the Internet, I just work there. | via Easynews.com https://bsky.app/profile/myrkraverk.bsky.social | for ( ;; ) _:; Federated at https://fed.brid.gy/bsky/myrkraverk.bsky.social
[toc] | [prev] | [next] | [standalone]
| From | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| Date | 2026-11-17 05:41 +0200 |
| Message-ID | <6tinflp5vuam154j27t2b67hgb9nre1u63@4ax.com> |
| In reply to | #8738 |
On Tue, 17 Nov 2026 03:04:37 +0800, Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> wrote: >On 11/16/2026 9:30 PM, Steve Hayes wrote: >> I'm not so sure about the drum, as I've never had to replace that >> before. >> >> > >I have. If I remember correctly, the symptom is partial printing on the >page. Like, vertical blank lines throughout. Also, the machine will >complain -- well, my Brother machine -- about replacing the drum every >time you replace the toner, requiring a secret code [1] entered into the >settings menu to bypass it, once it's "time" to replace the drum. If >the machine isn't complaining, and there are no printing artifacts you >can't explain, then you probably haven't had the need to replace the >drum yet. It did give some warnings about needing to replace the drum, but as iy was printing OK, I ignored them. I'll maybe see if it needs a new drum. >I get my drums from the same place I get my toner, so that part is easy. I've never seen them displayed with the toner cartridges, but since I haven't needed one, I haven't looked properly. -- Steve Hayes from Tshwane, South Africa Web: http://www.khanya.org.za/stevesig.htm Blog: http://methodius.blogspot.com E-mail - see web page, or parse: shayes at dunelm full stop org full stop uk
[toc] | [prev] | [next] | [standalone]
| From | "Carlos E.R." <robin_listas@es.invalid> |
|---|---|
| Date | 2026-11-17 11:54 +0100 |
| Message-ID | <pcotsmx6dn.ln2@Telcontar.valinor> |
| In reply to | #8738 |
On 2026-11-16 20:04, Johann 'Myrkraverk' Oskarsson wrote: > On 11/16/2026 9:30 PM, Steve Hayes wrote: >> On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen >> <lars@beagle-ears.com> wrote: >> The toner is very easily obtainable -- the TN1000 cartridge fits >> several different Brother models, and whenever I go to buy a new one >> there is a big pile of them in the shop, so they are quite popular. >> >> I'm not so sure about the drum, as I've never had to replace that >> before. >> >> > > I have. If I remember correctly, the symptom is partial printing on the > page. Like, vertical blank lines throughout. Also, the machine will > complain -- well, my Brother machine -- about replacing the drum every > time you replace the toner, requiring a secret code [1] entered into the > settings menu to bypass it, once it's "time" to replace the drum. If > the machine isn't complaining, and there are no printing artifacts you > can't explain, then you probably haven't had the need to replace the > drum yet. > > I get my drums from the same place I get my toner, so that part is easy. > > > Best wishes, and happy printing! > > [1] Like in a video game. I'm wondering why some printers replace both toner cartridge with new drum included each time. It's a waste, right? My printer is like that. HP. Maybe they recycle/reuse them. They do ask me to return used cartridges. Yes, expensive things, but I have only replaced the things twice in life (bough 2008). -- Cheers, Carlos. ES🇪🇸, EU🇪🇺;
[toc] | [prev] | [next] | [standalone]
| From | Paul <nospam@needed.invalid> |
|---|---|
| Date | 2026-11-17 09:42 -0500 |
| Message-ID | <11dhp4j$ghrh$1@dont-email.me> |
| In reply to | #8741 |
On Tue, 11/17/2026 5:54 AM, Carlos E.R. wrote: > On 2026-11-16 20:04, Johann 'Myrkraverk' Oskarsson wrote: >> On 11/16/2026 9:30 PM, Steve Hayes wrote: >>> On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen >>> <lars@beagle-ears.com> wrote: > > >>> The toner is very easily obtainable -- the TN1000 cartridge fits >>> several different Brother models, and whenever I go to buy a new one >>> there is a big pile of them in the shop, so they are quite popular. >>> >>> I'm not so sure about the drum, as I've never had to replace that >>> before. >>> >>> >> >> I have. If I remember correctly, the symptom is partial printing on the >> page. Like, vertical blank lines throughout. Also, the machine will >> complain -- well, my Brother machine -- about replacing the drum every >> time you replace the toner, requiring a secret code [1] entered into the >> settings menu to bypass it, once it's "time" to replace the drum. If >> the machine isn't complaining, and there are no printing artifacts you >> can't explain, then you probably haven't had the need to replace the >> drum yet. >> >> I get my drums from the same place I get my toner, so that part is easy. >> >> >> Best wishes, and happy printing! >> >> [1] Like in a video game. > > > I'm wondering why some printers replace both toner cartridge with new drum included each time. It's a waste, right? > > My printer is like that. HP. > > Maybe they recycle/reuse them. They do ask me to return used cartridges. > > Yes, expensive things, but I have only replaced the things twice in life (bough 2008). That started a long time ago. And the photo-active part was a plastic. If, during recycling, that was scratched, it would not be reused. Previous drums had been glass, and they were charging $3000 a piece for those. Those supported high page counts, like you could do 60,000 pages a month for two or three years on one of those. And it likely wasn't a materials limitation, it was just rough handling by the customer that was damaging it. The purpose of returning a used cartridge, is so the "low-cost-refillers" don't get their hands on one. If the device is chipped, they would want to prevent a refiller from taking advantage of the chippage. Integrating a drum into a cartridge, means fewer spare parts to stock and distribute. And if the materials to make the drum portion (whether a belt or drum), they could be a plastic and pretty cheap to make. The design may also be intended to make color lasers easier to cram into a housing, and then if you are doing a monochrome printer, there would be plenty of space left over by reusing the same piece-part for the job. Paul
[toc] | [prev] | [next] | [standalone]
| From | "Carlos E.R." <robin_listas@es.invalid> |
|---|---|
| Date | 2026-11-17 22:01 +0100 |
| Message-ID | <burusmxv4q.ln2@Telcontar.valinor> |
| In reply to | #8743 |
On 2026-11-17 15:42, Paul wrote: > On Tue, 11/17/2026 5:54 AM, Carlos E.R. wrote: >> On 2026-11-16 20:04, Johann 'Myrkraverk' Oskarsson wrote: >>> On 11/16/2026 9:30 PM, Steve Hayes wrote: >>>> On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen >>>> <lars@beagle-ears.com> wrote: ... >> >> I'm wondering why some printers replace both toner cartridge with new drum included each time. It's a waste, right? >> >> My printer is like that. HP. >> >> Maybe they recycle/reuse them. They do ask me to return used cartridges. >> >> Yes, expensive things, but I have only replaced the things twice in life (bough 2008). > > That started a long time ago. And the photo-active part was a plastic. > If, during recycling, that was scratched, it would not be reused. > > Previous drums had been glass, and they were charging $3000 a piece for > those. Those supported high page counts, like you could > do 60,000 pages a month for two or three years on one of those. > And it likely wasn't a materials limitation, it was just > rough handling by the customer that was damaging it. > > The purpose of returning a used cartridge, is so the "low-cost-refillers" > don't get their hands on one. If the device is chipped, they would > want to prevent a refiller from taking advantage of the chippage. Ah! Never occurred to me. > > Integrating a drum into a cartridge, means fewer spare parts to stock > and distribute. And if the materials to make the drum portion > (whether a belt or drum), they could be a plastic and pretty cheap > to make. The design may also be intended to make color lasers > easier to cram into a housing, and then if you are doing a monochrome > printer, there would be plenty of space left over by reusing the > same piece-part for the job. > > Paul -- Cheers, Carlos. ES🇪🇸, EU🇪🇺;
[toc] | [prev] | [next] | [standalone]
| From | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| Date | 2026-11-18 05:03 +0200 |
| Message-ID | <j55qfldbsqgini6hh8f10a5kl355cvd4hs@4ax.com> |
| In reply to | #8741 |
On Tue, 17 Nov 2026 11:54:49 +0100, "Carlos E.R." <robin_listas@es.invalid> wrote: >I'm wondering why some printers replace both toner cartridge with new >drum included each time. It's a waste, right? > >My printer is like that. HP. That is why the last printer I got was a Brother. My previous printers (HP & Samsung) had the drum incorporated into the toner cartridge, so it was more expensive to replace. -- Steve Hayes from Tshwane, South Africa Web: http://www.khanya.org.za/stevesig.htm Blog: http://methodius.blogspot.com E-mail - see web page, or parse: shayes at dunelm full stop org full stop uk
[toc] | [prev] | [next] | [standalone]
| From | Mark Lloyd <nomail@here.invalid> |
|---|---|
| Date | 2026-11-16 15:38 +0000 |
| Message-ID | <6afb2374$1$500511$882e4bbb@reader.netnews.com> |
| In reply to | #8732 |
On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen wrote: [ship] > I have an HL-2320-D which is working OK. I had to replace the drum once. > There is a WiFi model also. With WiFi, it costs $125 at Walmart. Without > WiFi it costs $320 at Amazon according to Google search results. These > do two-sided printing (D for Duplex). As to the letters at the end, I know of: C - color D - duplex (prints both sides) N - networking (no WiFi) W - WiFi [snip] -- 39 days until the winter celebration (Friday, December 25, 2026 00:00 for 1 day). Mark Lloyd http://notstupid.us/ "That the saints may enjoy their beatitude and the grace of God more abundantly they are permitted to see the punishment of the damned in hell." [Thomas Aquinas (1225-1274), Summa Theologica]
[toc] | [prev] | [next] | [standalone]
| From | Anton Antimo <anton@safunu.org> |
|---|---|
| Date | 2026-11-17 09:51 -0300 |
| Message-ID | <87cxs3k4d8.fsf@safunu.org> |
| In reply to | #8735 |
Mark Lloyd <nomail@here.invalid> writes: > On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen wrote: > > [ship] > >> I have an HL-2320-D which is working OK. I had to replace the drum once. >> There is a WiFi model also. With WiFi, it costs $125 at Walmart. Without >> WiFi it costs $320 at Amazon according to Google search results. These >> do two-sided printing (D for Duplex). > > As to the letters at the end, I know of: > > C - color > D - duplex (prints both sides) > N - networking (no WiFi) > W - WiFi Ah, thanks for that---I was wondering about the W as my printer is a Brother HL-2360DW. Would it be too much to ask you to define the HL?
[toc] | [prev] | [next] | [standalone]
| From | Mark Lloyd <nomail@here.invalid> |
|---|---|
| Date | 2026-11-17 16:06 +0000 |
| Message-ID | <6afc7b75$2$21$882e4bbb@reader.netnews.com> |
| In reply to | #8742 |
On Tue, 17 Nov 2026 09:51:47 -0300, Anton Antimo wrote: [snip] >> As to the letters at the end, I know of: >> >> C - color >> D - duplex (prints both sides) >> N - networking (no WiFi) >> W - WiFi > > Ah, thanks for that---I was wondering about the W as my printer is a > > Brother HL-2360DW. > > Would it be too much to ask you to define the HL? I'm not sure, but it seems to mean its just a printer. The all-in-one versions have MFC there. -- 38 days until the winter celebration (Friday, December 25, 2026 00:00 for 1 day). Mark Lloyd http://notstupid.us/ "The idea of a good society is something you do not need a religion and eternal punishment to buttress; you need a religion if you are terrified of death." [Gore Vidal]
[toc] | [prev] | [next] | [standalone]
| From | Paul <nospam@needed.invalid> |
|---|---|
| Date | 2026-11-15 22:39 -0500 |
| Message-ID | <11ddttd$398hj$1@dont-email.me> |
| In reply to | #8731 |
On Sun, 11/15/2026 9:42 PM, Steve Hayes wrote: > On Sun, 15 Nov 2026 15:29:25 -0400, Maria Sophia > <mariasophia@comprehension.com> wrote: > >> On that basis, the machines worth looking at are all Brother mono lasers, >> because Brother is the last big vendor whose toner carts are a plastic >> hopper with a fill plug and a mechanical reset gear rather than a chip and >> an e-fuse. HP and Samsung went to chips years ago, which is why they are >> the wrong answer for this problem set, in my humblest of opinions. > > I have a Brother HL-1210W which has just stopped working. > > When I bought it the major advantage was that the ink cartridge was > separate from the roller. It said that the ink cartridge could do 1000 > pages, and the roller 10000. > > For some time now it has been warning me that the roller needs > replacing, but I haven't noticed any decrease in print quality, so > I've put off replacing it. > > But now when I switch it on, it makes a clicking sound, but doesn't > run its startup routine, and then a red ligh flashes. Sometimes > seitching it on and off at the wall plug got it to start up properly, > but now it mostly doesn't. > > Is this something the could be fixed by getting a new roller? I'm > pretty sure it would cost more than getting a new printer, but I'm > reluctant to get a new printer because it might be one of the "phone > home" models, and also might not have drivers for my Windows XP and > Windows 10 32-bit printers. I have a suspicion this isn't a full parts list. https://www.argecy.com/brother-hl-1210w-1211w-1212w-1218w-1222w-parts Printers traditionally, had simple rotating things, and little in the way of position sensing. When a machine starts, no assumption is made about the drum position. By looking for a synchronization marker (after some arbitrary number of motor shaft rotations, could be thousands of them), the machine can stop the drive train at a position suited to start-of-print. Your click-click-click was three attempts at sync, where a switch or optical sensor did not work to detect the mark. The noise could be a broken thing scraping on something. Using a microswitch is popular, while optical sensors don't have to wear out (no contact friction). Machines can have sensors sprinkled about, suited to detecting a paper jam. A motor can also stop on overcurrent, if the paper path presents a higher than normal level of friction. If a rotary bearing fails (and now presents too much friction), the motor drive can stop delivering current. Because these machines use plastic gears, if a tooth is missing from one of the gears, this can cause a section of the machine to lose motive power. It's possible for companies to make gears out of metal, that are virtually wear free. Nobody does that. They always do it the cheap way. Usually, you can get a machine open enough, to check some of this stuff. It may not be possible to rotate everything manually while looking for trouble. ******* There's no reason for "a new anything" to have a WinXP driver :-) This is not how companies roll. At one time, NICs came with drivers for various NDIS versions, and this covered quite an expanse of OS versions. There's no particular reason a machine could not have both a Win10 and a Win11 driver. Sometimes, even the text on the box is wrong, about whether W10 and W11 work with what is inside. Sometimes it only mentions W10, when in fact it is now a W11 product -- this comes from using the same box supply. It's possible the Samsung laser printer factory, was bought by HP. And all the labeling on those products, now says HP on it. A company like Brother might still be around. Paul
[toc] | [prev] | [next] | [standalone]
| From | "R.Wieser" <address@is.invalid> |
|---|---|
| Date | 2026-11-16 17:43 +0100 |
| Message-ID | <11dfbrn$3nhbq$1@dont-email.me> |
| In reply to | #8731 |
Steve, > and also might not have drivers for my Windows XP and > Windows 10 32-bit printers. For that reason try to find a printer which supports eps (might be a bit more expensive though). Its rather universal, and at least XP (don't know about W10) should have a generic eps driver for it. I've got a brother 14-1450 (BW laser printer) myself, which has now served me for ... IIRC, over two decades. Regards, Rudy Wieser
[toc] | [prev] | [next] | [standalone]
| From | "R.Wieser" <address@is.invalid> |
|---|---|
| Date | 2026-11-16 17:46 +0100 |
| Message-ID | <11dfc1q$3nk0s$1@dont-email.me> |
| In reply to | #8736 |
a brother 14-1450 Ehrm... a HL-1450.
[toc] | [prev] | [next] | [standalone]
| From | Steve Hayes <hayesstw@telkomsa.net> |
|---|---|
| Date | 2026-11-17 05:44 +0200 |
| Message-ID | <n8jnflt402a606d5qmqj6bj24vnumhsc68@4ax.com> |
| In reply to | #8736 |
On Mon, 16 Nov 2026 17:43:29 +0100, "R.Wieser" <address@is.invalid> wrote: >Steve, > >> and also might not have drivers for my Windows XP and >> Windows 10 32-bit printers. > >For that reason try to find a printer which supports eps (might be a bit >more expensive though). Its rather universal, and at least XP (don't know >about W10) should have a generic eps driver for it. > >I've got a brother 14-1450 (BW laser printer) myself, which has now served >me for ... IIRC, over two decades. Thanks, I'll check that. -- Steve Hayes from Tshwane, South Africa Web: http://www.khanya.org.za/stevesig.htm Blog: http://methodius.blogspot.com E-mail - see web page, or parse: shayes at dunelm full stop org full stop uk
[toc] | [prev] | [standalone]
Back to top | Article view | alt.comp.os.windows-xp
csiph-web