Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > alt.comp.os.windows-xp > #8745

Re: Printer Recommendation

From "Carlos E.R." <robin_listas@es.invalid>
Newsgroups alt.comp.os.windows-10, comp.periphs.printers, alt.comp.periphs.printers, alt.comp.os.windows-xp
Subject Re: Printer Recommendation
Date 2026-11-17 22:01 +0100
Organization Tebibyte_Retro_Gaming
Message-ID <burusmxv4q.ln2@Telcontar.valinor> (permalink)
References (3 earlier) <11dds91$38t30$1@dont-email.me> <vu0mfl9cciqvjtlhq1biidcfbn891h6qhf@4ax.com> <atIKS.634$GC2.192@fx09.ams4> <pcotsmx6dn.ln2@Telcontar.valinor> <11dhp4j$ghrh$1@dont-email.me>

Cross-posted to 4 groups.

Show all headers | View raw


On 2026-11-17 15:42, Paul wrote:
> On Tue, 11/17/2026 5:54 AM, Carlos E.R. wrote:
>> On 2026-11-16 20:04, Johann 'Myrkraverk' Oskarsson wrote:
>>> On 11/16/2026 9:30 PM, Steve Hayes wrote:
>>>> On Sun, 15 Nov 2026 19:11:27 -0800, Lars Poulsen
>>>> <lars@beagle-ears.com> wrote:

...

>>
>> I'm wondering why some printers replace both toner cartridge with new drum included each time. It's a waste, right?
>>
>> My printer is like that. HP.
>>
>> Maybe they recycle/reuse them. They do ask me to return used cartridges.
>>
>> Yes, expensive things, but I have only replaced the things twice in life (bough 2008).
> 
> That started a long time ago. And the photo-active part was a plastic.
> If, during recycling, that was scratched, it would not be reused.
> 
> Previous drums had been glass, and they were charging $3000 a piece for
> those. Those supported high page counts, like you could
> do 60,000 pages a month for two or three years on one of those.
> And it likely wasn't a materials limitation, it was just
> rough handling by the customer that was damaging it.
> 
> The purpose of returning a used cartridge, is so the "low-cost-refillers"
> don't get their hands on one. If the device is chipped, they would
> want to prevent a refiller from taking advantage of the chippage.

Ah!

Never occurred to me.

> 
> Integrating a drum into a cartridge, means fewer spare parts to stock
> and distribute. And if the materials to make the drum portion
> (whether a belt or drum), they could be a plastic and pretty cheap
> to make. The design may also be intended to make color lasers
> easier to cram into a housing, and then if you are doing a monochrome
> printer, there would be plenty of space left over by reusing the
> same piece-part for the job.
> 
>     Paul


-- 
Cheers, Carlos.
ES🇪🇸, EU🇪🇺;

Back to alt.comp.os.windows-xp | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-16 04:42 +0200
  Re: Printer Recommendation Lars Poulsen <lars@beagle-ears.com> - 2026-11-15 19:11 -0800
    Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-16 15:30 +0200
      Re: Printer Recommendation Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> - 2026-11-17 03:04 +0800
        Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-17 05:41 +0200
        Re: Printer Recommendation "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 11:54 +0100
          Re: Printer Recommendation Paul <nospam@needed.invalid> - 2026-11-17 09:42 -0500
            Re: Printer Recommendation "Carlos E.R." <robin_listas@es.invalid> - 2026-11-17 22:01 +0100
          Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-18 05:03 +0200
    Re: Printer Recommendation Mark Lloyd <nomail@here.invalid> - 2026-11-16 15:38 +0000
      Re: Printer Recommendation Anton Antimo <anton@safunu.org> - 2026-11-17 09:51 -0300
        Re: Printer Recommendation Mark Lloyd <nomail@here.invalid> - 2026-11-17 16:06 +0000
  Re: Printer Recommendation Paul <nospam@needed.invalid> - 2026-11-15 22:39 -0500
  Re: Printer Recommendation "R.Wieser" <address@is.invalid> - 2026-11-16 17:43 +0100
    Re: Printer Recommendation "R.Wieser" <address@is.invalid> - 2026-11-16 17:46 +0100
    Re: Printer Recommendation Steve Hayes <hayesstw@telkomsa.net> - 2026-11-17 05:44 +0200

csiph-web