Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > aus.computers > #57963

Re: Cutting it fine NBN

Show all headers | View raw

"Rod Speed" <rod.speed.aaa@gmail.com> wrote in message 
news:ef5o8lFudfhU1@mid.individual.net...
>
>
> "F Murtz" <haggisz@hotmail.com> wrote in message 
> news:588da0c8$0$52088$b1db1813$15bdbe48@news.astraweb.com...
>> Rod Speed wrote:
>>>
>>>
>>> "felix" <me@nothere.invalid> wrote in message
>>> news:ef51tdFqk3tU1@mid.individual.net...
>>>> On Sunday, 29 Jan 2017 1:02 PM, Petzl wrote:
>>>>> On Sun, 29 Jan 2017 12:45:07 +1100, felix <me@nothere.invalid> wrote:
>>>>>
>>>>>> On Sunday, 29 Jan 2017 11:54 AM, Petzl wrote:
>>>>>>> On Sat, 28 Jan 2017 22:08:03 +1100, F Murtz <haggisz@hotmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>>    3days left
>>>>>>>> Construction of the nbn™ network has started in your area.
>>>>>>>> The nbn™ network is estimated to be available in your area: Jan
>>>>>>>> 2017*.
>>>>>>> Ring your chosen provider NOW
>>>>>> but they allow several months to connect before they disconnect the
>>>>>> copper network
>>>>> NBN is better and cheaper and it's what "F Murtz" wants ASAP
>>>>
>>>> yes, but I'm just saying it's not like he's going to get cut off if he
>>>> doesn't do it quickly. besides, there's no guarantee how long it will
>>>> take to connect him once he does apply, so it could take many weeks
>>>> for the infrastructure to be installed, particularly if there are a
>>>> lot of ppl wanting connections at the same time.
>>>
>>> There is no infrastructure to be installed with FTTN.
>>>
>>> Once you can signup, the infrastructure has all been installed
>>> and all they have to do is jumper from adsl to fttn in your pillar.
>>
>> Is yours working yet?

> Allegedly tomorrow, quite literally.

Bloody hell. The adsl2+ service dropped out at 12:30, took about
an hour before the fttn was working, but that’s because the first call
to MyRepublic took 25 mins to answer and then when he put me on
hold to get the service provisioned with them, that call dropped out.

Getting 108/44 which isnt too bad at all.

> Optarse did fuck up very comprehensively indeed. NBNco could never
> fine any record of anyone ordering an NBN service for my address.
>
> MyRepublic originally ran the line that they didn’t know what
> the phone number for my phone service was, even tho I told
> them that when I signed up by phone using their call center,
> because they have to know the number to port to their voip
> service since there is no POTS service with the NBN, just voip.
>
> Even after I gave them that, again, still NBNco couldn’t see any
> order for a phone service for my address, even tho I was calling
> them on it since the NBNco number is a 1800 number and I am
> clearly getting an adsl2+ service on that line.
>
> I kept being told that it would take some time to happen, and eventually
> after being told that about 6 times, chucked a tantrum and got supplied 
> with
> the Optarse order number and the number to ring at Optarse Wholesale.
>
> When I rang Optarse Wholesales, the silly cow claimed that she couldn’t
> actually order an NBN service for my place, even with the phone number.
> There was no way to enter that on the order form. Corse they didn’t bother
> to tell anyone about that problem, just raised an incident with NBNco 
> which
> is what happens with a fault, not a problem with ordering a service.
>
> NBNco told me that they had a 'back room' group that handled that
> sort of problem with ordering a service and that I should tell the RSP
> that they needed to use that. I told Optarse Wholesale that at about
> 1620 in the afternoon and she claimed that everyone had gone home
> and that she 'wasn’t trained to do that' and that she would check that
> with her senior staff the next day.
>
> When I rang Optarse Wholesale again next day at around midday,
> the fuckwit refused to even talk to me and said that he couldn’t
> even look up the details of my service for 'privacy' reasons.
>
> I called NBNco again and they then had an order for my service.
>
> Called MyRepublic again, and they now had a record that I would
> be getting the cutover from the adsl2+ service to fttn tomorrow
> and that I didn’t need to be there, the tech would just be doing
> the jumpering in the pillar and it should all work fine after that.
>
> We'll see, tomorrow. Havent noticed anyone doing any work in the
> pillars cutting anyone over since my half of town went live on 23-Dec.
> Less clear if anyone has got an fttn service yet in my town. I ordered
> an fttn service on the day it went live in my half of town and the
> modem showed up between Xmas and New Year.
>
> My neighbour's kid also ordered a service with MyRepublic a bit
> later than I did and he showed up last night and told me that he
> has an appointment date of 5-Feb or something and that
> someone has to be there at his place. He has the modem too.
>
> We both should get very close to 100/40, particularly me.
> I can damned near spit on the node and the pillar and the
> cable is as direct as possible to the pillar from my place.
>
> His is 300' further away, but should still get in the high 90/30s.
>
> Everyone else I know well in town went live on 20-Jan and I
> don’t know that any of them have actually ordered the NBN yet.
> I was talking to one of them this arvo and he certainly hasn’t yet.
>
> I'll be grovelling towards Mecca first thing tomorrow. 

Back to aus.computers | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-28 22:08 +1100
  Re: Cutting it fine NBN Petzl <petzlx@gmail.com> - 2017-01-29 11:54 +1100
    Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-29 12:45 +1100
      Re: Cutting it fine NBN Petzl <petzlx@gmail.com> - 2017-01-29 13:02 +1100
        Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-29 13:21 +1100
          Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 17:12 +1100
            Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-29 17:46 +1100
              Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 19:08 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 19:42 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 21:02 +1100
              Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 19:13 +1100
            Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 18:58 +1100
              Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 19:38 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 21:00 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 06:08 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 12:33 +1100
                Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-30 13:25 +1100
                Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 13:43 +1100
                Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-30 14:37 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 14:06 +1100
                Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-30 14:37 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 14:14 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 14:17 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 17:08 +1100
                Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 19:48 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 20:45 +1100
                Re: Cutting it fine NBN Petzl <petzlx@gmail.com> - 2017-01-30 19:52 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-30 20:40 +1100
                Re: Cutting it fine NBN Petzl <petzlx@gmail.com> - 2017-01-30 22:36 +1100
                Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-31 05:50 +1100
      Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 18:57 +1100
        Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-29 20:56 +1100
          Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 21:01 +1100
          Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 21:04 +1100
    Re: Cutting it fine NBN Lucifer Morningstar <Barry@saymyname.com> - 2017-01-29 13:01 +1100
      Re: Cutting it fine NBN felix <me@nothere.invalid> - 2017-01-29 13:17 +1100
      Re: Cutting it fine NBN Colin Horsley <horsley-spam@westnet.com.au> - 2017-01-29 13:34 +1100
      Re: Cutting it fine NBN Petzl <petzlx@gmail.com> - 2017-01-29 13:58 +1100
      Re: Cutting it fine NBN "Rod Speed" <rod.speed.aaa@gmail.com> - 2017-01-29 17:10 +1100
      Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-29 19:12 +1100
      Re: Cutting it fine NBN news16 <news16@woa.com.au> - 2017-01-30 00:06 +0000
        Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 12:41 +1100
          Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 12:53 +1100
            Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 15:02 +1100
              Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 15:40 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 15:55 +1100
                Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 16:15 +1100
                Re: Cutting it fine NBN F Murtz <haggisz@hotmail.com> - 2017-01-30 16:38 +1100
                Re: Cutting it fine NBN Xeno <xenolith@optusnet.com.au> - 2017-01-30 19:40 +1100

csiph-web