Groups | Search | Server Info | Login | Register

Groups > nl.comp.os.linux.techniek > #9642

Re: Data redden

Show all headers | View raw

On 2024-06-29, Paul van der Vlis <paul@vandervlis.nl> wrote:
> Hoi,
>
> Ik probeer de data te redden van een USB-disk. De vorige twee keer ging 
> dat goed. Maar hier verschijnt /dev/sdd alleen tijdelijk even tijdens 
> het starten, maar is al vrij snel weer verdwenen.
>
> Ik heb twee verschillende computers en kabels geprobeerd.
> Zie onder output van dmesg.
>
> Heeft iemand nog ideeën wat ik zou kunnen doen om /dev/sdd te laten 
> voortbestaan, zodat ik de data eraf kan halen?

Als ik die log lees dan lijkt het ding gewoon kapot (elektronisch
of zo). Waarschijnlijk helaas voor de data erop.


> Groet,
> Paul
>
>
> 174264.957546] usb 1-1.5: new high-speed USB device number 23 using ehci-pci
> [174265.107849] usb 1-1.5: New USB device found, idVendor=1058, 
> idProduct=2620, bcdDevice=10.23
> [174265.107853] usb 1-1.5: New USB device strings: Mfr=2, Product=3, 
> SerialNumber=1
> [174265.107855] usb 1-1.5: Product: Elements 2620
> [174265.107856] usb 1-1.5: Manufacturer: Western Digital
> [174265.107858] usb 1-1.5: SerialNumber: 57583732443631304B365431
> [174265.108279] usb-storage 1-1.5:1.0: USB Mass Storage device detected
> [174265.108658] scsi host7: usb-storage 1-1.5:1.0
> [174266.118725] scsi 7:0:0:0: Direct-Access     WD       Elements 2620 
>   1023 PQ: 0 ANSI: 6
> [174266.119767] sd 7:0:0:0: Attached scsi generic sg4 type 0
> [174266.123256] sd 7:0:0:0: [sdd] Spinning up disk...
> [174267.141475] 
> .........................................................ready
> [174324.485251] sd 7:0:0:0: [sdd] Very big device. Trying to use READ 
> CAPACITY(16).
> [174324.485882] sd 7:0:0:0: [sdd] 9767475200 512-byte logical blocks: 
> (5.00 TB/4.55 TiB)
> [174324.485885] sd 7:0:0:0: [sdd] 4096-byte physical blocks
> [174324.487263] sd 7:0:0:0: [sdd] Write Protect is off
> [174324.487268] sd 7:0:0:0: [sdd] Mode Sense: 47 00 10 08
> [174324.488713] sd 7:0:0:0: [sdd] No Caching mode page found
> [174324.488721] sd 7:0:0:0: [sdd] Assuming drive cache: write through
> [174355.583306] usb 1-1.5: reset high-speed USB device number 23 using 
> ehci-pci
> [174360.691216] usb 1-1.5: device descriptor read/64, error -110
> [174376.306788] usb 1-1.5: device descriptor read/64, error -110
> [174376.494792] usb 1-1.5: reset high-speed USB device number 23 using 
> ehci-pci
> [174381.682674] usb 1-1.5: device descriptor read/64, error -110
> [174397.306284] usb 1-1.5: device descriptor read/64, error -110
> [174397.494297] usb 1-1.5: reset high-speed USB device number 23 using 
> ehci-pci
> [174408.178067] usb 1-1.5: device not accepting address 23, error -110
> [174408.258059] usb 1-1.5: reset high-speed USB device number 23 using 
> ehci-pci
> [174418.929801] usb 1-1.5: device not accepting address 23, error -110
> [174418.930555] usb 1-1.5: USB disconnect, device number 23
> [174418.945792] print_req_error: 2 callbacks suppressed
> [174418.945795] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945809] buffer_io_error: 2 callbacks suppressed
> [174418.945811] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945880] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945886] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945910] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945913] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945933] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945934] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945938] ldm_validate_partition_table(): Disk read failed.
> [174418.945943] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945945] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945952] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945953] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945961] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945962] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945969] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945971] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945974] Dev sdd: unable to read RDB block 0
> [174418.945980] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945981] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.945988] blk_update_request: I/O error, dev sdd, sector 0 op 
> 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [174418.945990] Buffer I/O error on dev sdd, logical block 0, async page 
> read
> [174418.946009]  sdd: unable to read partition table
> [174418.973864] sd 7:0:0:0: [sdd] Read Capacity(16) failed: Result: 
> hostbyte=DID_ERROR driverbyte=DRIVER_OK
> [174418.973867] sd 7:0:0:0: [sdd] Sense not available.
> [174418.973878] sd 7:0:0:0: [sdd] Read Capacity(10) failed: Result: 
> hostbyte=DID_ERROR driverbyte=DRIVER_OK
> [174418.973880] sd 7:0:0:0: [sdd] Sense not available.
> [174418.973884] sd 7:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
> [174418.973886] sd 7:0:0:0: [sdd] 4096-byte physical blocks
> [174418.973897] sd 7:0:0:0: [sdd] Attached SCSI disk
> [174419.109763] usb 1-1.5: new high-speed USB device number 24 using 
> ehci-pci
> [174424.433678] usb 1-1.5: device descriptor read/64, error -110
> [174440.049263] usb 1-1.5: device descriptor read/64, error -110
> [174440.241280] usb 1-1.5: new high-speed USB device number 25 using 
> ehci-pci
> [174445.425155] usb 1-1.5: device descriptor read/64, error -110
> [174461.040753] usb 1-1.5: device descriptor read/64, error -110
> [174461.148871] usb 1-1-port5: attempt power cycle
> [174461.752759] usb 1-1.5: new high-speed USB device number 26 using 
> ehci-pci
> [174472.432497] usb 1-1.5: device not accepting address 26, error -110
> [174472.512546] usb 1-1.5: new high-speed USB device number 27 using 
> ehci-pci
> [174483.184225] usb 1-1.5: device not accepting address 27, error -110
> [174483.184471] usb 1-1-port5: unable to enumerate USB device
>
>
>


-- 
De Kerk van Roodkapje (KvR) belijdt de enige ware religie! De
Rode Macht van Roodkapje is wetenschappelijk onderzocht en
bevestigd (google roodverschuiving).

Back to nl.comp.os.linux.techniek | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Data redden Paul van der Vlis <paul@vandervlis.nl> - 2024-06-29 17:11 +0200
  Re: Data redden "De ongekruisigde (ds.)" <ongekruisigde@gekruisigden.invalid> - 2024-06-29 17:08 +0000
    Re: Data redden a3@a3.nl.invalid (Adri Verhoef) - 2024-07-02 00:33 +0000
      Re: Data redden Ozymandias <ozymandias@ozymandias.invalid> - 2024-07-02 08:20 +0000
      Re: Data redden Paul van der Vlis <paul@vandervlis.nl> - 2024-07-03 13:01 +0200
        Re: Data redden Paul van der Vlis <paul@vandervlis.nl> - 2024-07-03 13:41 +0200
          Re: Data redden Ozymandias <ozymandias@ozymandias.invalid> - 2024-07-03 12:29 +0000
      Re: Data redden Paul van der Vlis <paul@vandervlis.nl> - 2024-07-03 13:58 +0200
        Re: Data redden a3@a3.nl.invalid (Adri Verhoef) - 2024-07-15 00:00 +0000

csiph-web