Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so)

From	Dan Purgert <dan@djph.net>
Newsgroups	alt.os.linux
Subject	Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so)
Date	2022-09-13 10:12 +0000
Organization	A noiseless patient Spider
Message-ID	<slrnti0lu7.2e4.dan@djph.net> (permalink)
References	(2 earlier) <tfbfge$bv0g$2@dont-email.me> <slrnthm974.2e4.dan@djph.net> <20220909190839.1081a8a5@nx-74205> <slrnthu2fq.2e4.dan@djph.net> <20220912205809.5894e75f@nx-74205>

Show all headers | View raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Aragorn wrote:
> On 12.09.2022 at 10:28, Dan Purgert scribbled:
>> Aragorn wrote:
>>> On 09.09.2022 at 11:34, Dan Purgert scribbled:
>>>> CUDA is nVidia's GPU tech.  Used a lot in heavy math [...]
>>>
>>> Nowadays, it's SPECIFICALLY being used for cryptocurrency mining.
>>> And Nvidia has now even begun developing GPUs which specialize in
>>> that.  
>> 
>> Yeah, but GPUs for crypto are so 2010.  Thought it all moved over to
>> ASICs for that?
>
> Not according to what I've read on Slashdot only a few weeks ago.  But
> your 1.6x-kilometerage may vary. :p

Or I just don't pay attention to changing trends :)


-----BEGIN PGP SIGNATURE-----
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=1xsy
-----END PGP SIGNATURE-----

-- 
|_|O|_|
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: DDAB 23FB 19FA 7D85 1CC1  E067 6D65 70E5 4CE7 2860

Back to alt.os.linux | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

[crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Soviet_Mario <SovietMario@CCCP.MIR> - 2022-09-07 14:13 +0200
  Re: [crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Dan Purgert <dan@djph.net> - 2022-09-07 13:18 +0000
    Re: [crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Soviet_Mario <SovietMario@CCCP.MIR> - 2022-09-08 00:39 +0200
      Re: [crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Dan Purgert <dan@djph.net> - 2022-09-09 12:18 +0000
  Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) "J.O. Aho" <user@example.net> - 2022-09-07 16:51 +0200
    Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Soviet_Mario <SovietMario@CCCP.MIR> - 2022-09-08 00:42 +0200
      Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) "J.O. Aho" <user@example.net> - 2022-09-08 07:56 +0200
      Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Dan Purgert <dan@djph.net> - 2022-09-09 11:34 +0000
        Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Aragorn <telcontar@duck.com> - 2022-09-09 19:08 +0200
          Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Dan Purgert <dan@djph.net> - 2022-09-12 10:28 +0000
            Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) "J.O. Aho" <user@example.net> - 2022-09-12 14:36 +0200
            Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) 5GyYap52yQ1UGMWD <ehj46PkBWfBAng9C@VW28LtWn6wknpUMV.invalid> - 2022-09-12 21:29 +0800
              Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Paul <nospam@needed.invalid> - 2022-09-12 13:58 -0400
                Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) 5GyYap52yQ1UGMWD <ehj46PkBWfBAng9C@VW28LtWn6wknpUMV.invalid> - 2022-09-13 08:41 +0800
                Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Paul <nospam@needed.invalid> - 2022-09-13 03:20 -0400
                Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) 5GyYap52yQ1UGMWD <ehj46PkBWfBAng9C@VW28LtWn6wknpUMV.invalid> - 2022-09-13 16:38 +0800
            Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Aragorn <telcontar@duck.com> - 2022-09-12 20:58 +0200
              Re: recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Dan Purgert <dan@djph.net> - 2022-09-13 10:12 +0000
  Re: [crosspost] recommended slicers for 3D printer and 'filled' volume? estimation (drivers, consumes and so) Robert Heller <heller@deepsoft.com> - 2022-09-07 15:23 +0000
    Re: [crosspost] recommended slicers for 3D printer and 'filled' volume? estimation (drivers, consumes and so) Soviet_Mario <SovietMario@CCCP.MIR> - 2022-09-08 00:43 +0200
  Re: [crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) not@telling.you.invalid (Computer Nerd Kev) - 2022-09-08 09:50 +1000
    Re: [crosspost] recommended slicers for 3D printer and 'filled' volume estimation (drivers, consumes and so) Soviet_Mario <SovietMario@CCCP.MIR> - 2022-09-08 03:18 +0200

csiph-web