Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1736980

[PATCH] mmc: core: Wait for Vdd to settle on card power off

Show all headers | View raw

The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase our wait to 10 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly.

Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
---
 drivers/mmc/core/core.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 66c9cf49ad2f..38630246de26 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1679,18 +1679,16 @@ void mmc_power_off(struct mmc_host *host)
 	mmc_set_initial_state(host);
 
 	/*
-	 * Some configurations, such as the 802.11 SDIO card in the OLPC
-	 * XO-1.5, require a short delay after poweroff before the card
-	 * can be successfully turned on again.
+	 * The SD spec requires at least 1 ms with Vdd at less than 0.5 V
+	 * before a card can be re-powered, but we need to wait longer so that
+	 * the voltage has time to drain.
 	 */
-	mmc_delay(1);
+	mmc_delay(10);
 }
 
 void mmc_power_cycle(struct mmc_host *host, u32 ocr)
 {
 	mmc_power_off(host);
-	/* Wait at least 1 ms according to SD spec */
-	mmc_delay(1);
 	mmc_power_up(host, ocr);
 }
 
-- 
2.14.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] mmc: core: Wait for Vdd to settle on card power off Kyle Roeschley <kyle.roeschley@ni.com> - 2017-09-21 19:50 +0200
  Re: [PATCH] mmc: core: Wait for Vdd to settle on card power off Ulf Hansson <ulf.hansson@linaro.org> - 2017-09-22 11:40 +0200

csiph-web