Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1724933
| From | Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline |
| Date | 2017-09-01 12:10 +0200 |
| Message-ID | <ukR3H-2tp-7@gated-at.bofh.it> (permalink) |
| References | <ukw8W-55Z-17@gated-at.bofh.it> <dvHI0-xt-471@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 08/31/2017 05:37 PM, Nicholas Piggin wrote:
> On Thu, 31 Aug 2017 17:17:41 +0530
> "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> wrote:
>
> > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
> >
> > commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via
> > stop-api only on Hotplug") clears the PECE1 bit of the LPCR via
> > stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on
> > an offlined CPU which is in a deep stop state.
> >
> > In the case where the stop-api support is found to be lacking, the
> > commit 785a12afdb4a ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT
> > states when stop-api fails") disables deep states that lose hypervisor
> > context. Thus in this case, the offlined CPU will be put to some
> > shallow idle state.
> >
> > However, we currently unconditionally clear the PECE1 in LPCR via
> > stop-api during CPU-Hotplug even when deep states are disabled due to
> > stop-api failure.
> >
> > Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug
> > *only* when the offlined CPU will be put to a deep state that loses
> > hypervisor context.
>
> This looks okay to me. The bug is due to calling opal_slw_set_reg when
> firmware has not enabled that feature, right?
Yes,
In the case where the stop-api support is found to be lacking, the
commit 785a12afdb4a ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT
states when stop-api fails") disables deep states that lose hypervisor
context. Thus in this case, the offlined CPU will be put to some shallow
idle state.
If a shallow state ( < stop4 ) is being chosen for cpu hotplug, then :
1) this opal call is not required.
2) may not be supported.
Hence should call opal_slw_set_reg() only if a deep state chosen for
cpu hotplug.
>
> >
> > Fixes: commit 24be85a23d1f ("powerpc/powernv: Clear PECE1 in LPCR via
> > stop-api only on Hotplug")
> >
> > Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com>
> > Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> > ---
> > arch/powerpc/platforms/powernv/idle.c | 8 +++++++-
> > 1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/powerpc/platforms/powernv/idle.c
> b/arch/powerpc/platforms/powernv/idle.c
> > index 9f59041..23f8fba 100644
> > --- a/arch/powerpc/platforms/powernv/idle.c
> > +++ b/arch/powerpc/platforms/powernv/idle.c
> > @@ -393,7 +393,13 @@ static void
> pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
> > u64 pir = get_hard_smp_processor_id(cpu);
> >
> > mtspr(SPRN_LPCR, lpcr_val);
> > - opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> > +
> > + /*
> > + * Program the LPCR via stop-api only for deepest stop state
> > + * can lose hypervisor context.
> > + */
> > + if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
> > + opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> > }
> >
> > /*
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline "Gautham R. Shenoy" <ego@linux.vnet.ibm.com> - 2017-08-31 13:50 +0200
Re: [PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline Nicholas Piggin <npiggin@gmail.com> - 2017-08-31 14:10 +0200
Re: [PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> - 2017-09-01 12:10 +0200
Re: [PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline Nicholas Piggin <npiggin@gmail.com> - 2017-09-01 12:40 +0200
Re: [PATCH] powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline pavrampu <pavrampu@linux.vnet.ibm.com> - 2017-09-06 11:00 +0200
csiph-web