Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.bugs.dist > #846693
| From | Daniel Reichelt <debian@nachtgeist.net> |
|---|---|
| Newsgroups | linux.debian.bugs.dist |
| Subject | Bug#851825: ethtool: ifdown/ifup sequence fails if offload_tx off is set in iface stanza |
| Date | 2017-08-30 11:10 +0200 |
| Message-ID | <uk7ay-6p7-47@gated-at.bofh.it> (permalink) |
| References | <t1dVn-5OD-1@gated-at.bofh.it> <ujXbc-8u5-9@gated-at.bofh.it> <t1dVn-5OD-1@gated-at.bofh.it> <ujXbc-8u5-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
[Multipart message — attachments visible in raw view] - view raw
On 08/30/2017 12:18 AM, Ben Hutchings wrote: > I can't reproduce this. What driver is used for eth0 (ethtool -i shows > this)? Ben, you're on to something: # ethtool -i eth0 driver: vif version: firmware-version: expansion-rom-version: bus-info: vif-0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no Indeed, this only happens in XEN guests running on a jessie host (didn't get around yet to test whether a stretch host makes the difference). On any other hw I own (a couple of e1000e and a r8169), ethtool always exits 0, with changes to offloading having been made or not. Sorry for not mentioning the fact about VMs earlier...just didn't think of it. Cheers Daniel
Back to linux.debian.bugs.dist | Previous | Next — Previous in thread | Find similar | Unroll thread
Bug#851825: ethtool: ifdown/ifup sequence fails if offload_tx off is set in iface stanza Ben Hutchings <ben@decadent.org.uk> - 2017-08-30 00:30 +0200 Bug#851825: ethtool: ifdown/ifup sequence fails if offload_tx off is set in iface stanza Daniel Reichelt <debian@nachtgeist.net> - 2017-08-30 11:10 +0200
csiph-web