Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1715611
| From | icenowy@aosc.io |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [linux-sunxi] Re: [PATCH v5] clk: sunxi-ng: support R40 SoC |
| Date | 2017-08-19 11:20 +0200 |
| Message-ID | <ug85b-7PC-5@gated-at.bofh.it> (permalink) |
| References | <ueD3r-5LR-9@gated-at.bofh.it> <ueFRD-7wU-7@gated-at.bofh.it> <ug85b-7PC-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
在 2017-08-19 17:11,Chen-Yu Tsai 写道:
> On Tue, Aug 15, 2017 at 4:52 PM, <icenowy@aosc.io> wrote:
>> 在 2017-08-15 13:55,Icenowy Zheng 写道:
>>>
>>> Allwinner R40 SoC have a clock controller module in the style of the
>>> SoCs beyond sun6i, however, it's more rich and complex.
>>>
>>> Add support for it.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>>> ---
>>> Changes in v5:
>>> - Added TODO's for PLL constraints.
>>> - Forced OHCI12M mux to 0.
>>> - Changed "adda" clock to "codec" to be consistent with "bus-codec".
>>> - Added several CLK_SET_RATE_{UNGATE,PARENT} flags.
>>> - Added PLL_CPU gate notifier.
>>> Changes in v4:
>>> - Removed usb-ohci-12M mux clocks.
>>> - Removed unused (and not in user manual) adda-4x clock.
>>> - Implemented proper SATA PLL system.
>>> - Renamed MP (Mixed Processor) clock names to drop the extra "DE_".
>>> - Renamed TCONs' clock names to "tcon-lcdX" or "tcon-tvX".
>>> - Added missing RST_DRAM.
>>> - Several clock post/pre-dividers and constraints fixes.
>>> Changes in v3:
>>> - Rebased on current linux-next.
>>> Changes in v2:
>>> - Fixes according to the SoC's user manual.
>>>
>>> drivers/clk/sunxi-ng/Kconfig | 5 +
>>> drivers/clk/sunxi-ng/Makefile | 1 +
>>> drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1290
>>> +++++++++++++++++++++++++++++
>>> drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 69 ++
>>> include/dt-bindings/clock/sun8i-r40-ccu.h | 187 +++++
>>> include/dt-bindings/reset/sun8i-r40-ccu.h | 130 +++
>>> 6 files changed, 1682 insertions(+)
>>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
>>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
>>> create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
>>> create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
>>>
>>> [...]
>>>
>>> +static void __init sun8i_r40_ccu_setup(struct device_node *node)
>>> +{
>>> + void __iomem *reg;
>>> + u32 val;
>>> +
>>> + reg = of_io_request_and_map(node, 0,
>>> of_node_full_name(node));
>>> + if (IS_ERR(reg)) {
>>> + pr_err("%s: Could not map the clock registers\n",
>>> + of_node_full_name(node));
>>> + return;
>>> + }
>>> +
>>> + /* Force the PLL-Audio-1x divider to 4 */
>>> + val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
>>> + val &= ~GENMASK(19, 16);
>>> + writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
>>> +
>>> + /* Force PLL-MIPI to MIPI mode */
>>> + val = readl(reg + SUN8I_R40_PLL_MIPI_REG);
>>> + val &= ~BIT(16);
>>> + writel(val, reg + SUN8I_R40_PLL_MIPI_REG);
>>> +
>>> + /* Force OHCI 12M parent to 0 */
>
> Clarified the comment as
>
> Force OHCI 12M parent to 12M divided from 48M
>
>>> + val = readl(reg + SUN8I_R40_USB_CLK_REG);
>>> + val &= ~GENMASK(20, 6);
>>
>>
>> Sorry but I think this line should be:
>>
>> val &= ~GENMASK(25, 20);
>>
>> I didn't understand GENMASK well...
>
> Fixed and applied. Thanks!
Thanks!
>
> ChenYu
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Re: [PATCH v5] clk: sunxi-ng: support R40 SoC icenowy@aosc.io - 2017-08-15 11:00 +0200 Re: [linux-sunxi] Re: [PATCH v5] clk: sunxi-ng: support R40 SoC icenowy@aosc.io - 2017-08-19 11:20 +0200 Re: [linux-sunxi] Re: [PATCH v5] clk: sunxi-ng: support R40 SoC Chen-Yu Tsai <wens@csie.org> - 2017-08-19 11:20 +0200
csiph-web