Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1706691

Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code

Show all headers | View raw

Hi Koshon,

On 2017-08-08 17:39, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Friday 04 August 2017 12:18 PM, Vivek Gautam wrote:
>> Refactoring the qcom-ufs phy and host controller code to move
>> further towards the generic phy usage. Right now the qcom-ufs exports
>> a bunch of APIs that are used by the host controller to initialize
>> the phy.
>> With this patch series, we populate the phy_init() which was a no-op
>> earlier. The host controller then calls the phy_init() at the 
>> designated
>> place rather than doing it invariably in ufs_hcd_init().
>> 
>> As part of this series, we introduce phy modes for ufs phy.
>> The M-PHY has two data rates defined for each generations (Gears) -
>> Rate A and Rate B. These can serve as the two modes of ufs HS phy.
>> Host controller can direct the phy to set the respective 
>> configurations
>> based on the phy modes.
>> 
>> The patch-series has been tested with necessary dt patches on db820c.
> 
> Can the first 3 patches go independently of the other 2 or should all 
> this be
> merged together?

The first 3 patches are independent, but the next 2 patches depend on 
those 3 for functionality.
I would prefer all to go in one tree. If you want to pull these in the 
phy tree,
I will request Subhash/Martin to ack the patches.


Regards
Vivek

> 
> Thanks
> Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-04 08:50 +0200
  [PATCH 5/5] ufs/phy: qcom: Refactor to use phy_init call Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-04 08:50 +0200
  [PATCH 4/5] scsi/ufs: qcom: Set phy mode based on the controllers HS MODE Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-04 08:50 +0200
  [PATCH 1/5] dt-bindings: phy: Add PHY_TYPE_UFS definition Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-04 09:00 +0200
  Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Kishon Vijay Abraham I <kishon@ti.com> - 2017-08-08 14:20 +0200
    Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-08 18:00 +0200
      Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Kishon Vijay Abraham I <kishon@ti.com> - 2017-08-09 07:50 +0200
        Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-09 08:50 +0200
          Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code "Martin K. Petersen" <martin.petersen@oracle.com> - 2017-08-11 02:10 +0200
            Re: [PATCH 0/5] qcom-ufs: phy/hcd: Refactor phy initialization code Vivek Gautam <vivek.gautam@codeaurora.org> - 2017-08-11 09:20 +0200

csiph-web