Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1599828
| From | Sinan Kaya <okaya@codeaurora.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT |
| Date | 2017-03-13 22:10 +0100 |
| Message-ID | <tkFo7-6nZ-47@gated-at.bofh.it> (permalink) |
| References | <tiQH1-3gA-29@gated-at.bofh.it> <tjeSZ-32y-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Bjorn, On 3/9/2017 5:27 PM, Bjorn Helgaas wrote: > This is an aspect of the ASPM design that I don't like: > > - pcie_aspm_init_link_state() is called on a *bridge* after we've > enumerated any devices below the bridge, and we allocate the > link_state. > > - pcie_aspm_exit_link_state() is called on an *endpoint*, and if > we're removing the last endpoint below a bridge, we release the > *parent's* link_state. I just posted V4 a minute ago. I divided ASPM init into two so that the ASPM registers are captured in device_add path. There is a section of the ASPM init code that needs to walk all the devices under the bridge. This section of the code is not working in device_add path as the link list for child devices has not been set up yet. Unless you tell me there is a better way to handle this, I don't see how we can remove the call from scan_slot. After further review, I think I can split PATCH V4 3/3 into two. Before diving into too much clean up, I wanted to get some feedback as it is obvious from the messed up cover letter. Sinan -- Sinan Kaya Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya <okaya@codeaurora.org> - 2017-03-08 21:50 +0100
Re: [PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Bjorn Helgaas <helgaas@kernel.org> - 2017-03-09 23:40 +0100
Re: [PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya <okaya@codeaurora.org> - 2017-03-10 15:40 +0100
RE: [PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT "Patel, Mayurkumar" <mayurkumar.patel@intel.com> - 2017-03-13 10:00 +0100
Re: [PATCH V3] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT Sinan Kaya <okaya@codeaurora.org> - 2017-03-13 22:10 +0100
csiph-web