Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1589091

Re: [PATCH v4 1/4] Documentation: dt-bindings: Document ADXL345 accelerometer binding

Show all headers | View raw

On Sun, Feb 26, 2017 at 09:45:04PM +0800, Eva Rachel Retuya wrote:
> Add the device tree binding documentation for the ADXL345 3-axis digital
> accelerometer.

Use "dt-bindings: iio: accel: ..." for the subject prefix.

> 
> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
> ---
>  .../devicetree/bindings/iio/accel/adxl345.txt      | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> new file mode 100644
> index 0000000..e623f4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> @@ -0,0 +1,38 @@
> +Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
> +
> +http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> +
> +Required properties:
> + - compatible : should be "adi,adxl345"
> + - reg : the I2C address or SPI chip select number of the sensor
> +
> +Required properties for SPI bus usage:
> + - spi-max-frequency : set maximum clock frequency, must be 5000000
> + - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
> +
> +Optional properties:
> + - interrupt-parent : phandle to the parent interrupt controller as documented
> +   in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> + - interrupts: interrupt mapping for IRQ as documented in
> +   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +
> +Example for a I2C device node:
> +
> +	adxl345@2a {

accelerometer@2a

> +		compatible = "adi,adxl345";
> +		reg = <0x53>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +Example for a SPI device node:
> +
> +	adxl345@0 {

Same here.

> +		compatible = "adi,adxl345";
> +		reg = <0>;
> +		spi-max-frequency = <5000000>;
> +		spi-cpol;
> +		spi-cpha;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> -- 
> 2.7.4
> 

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v4 1/4] Documentation: dt-bindings: Document ADXL345 accelerometer binding Eva Rachel Retuya <eraretuya@gmail.com> - 2017-02-26 14:50 +0100
  Re: [PATCH v4 1/4] Documentation: dt-bindings: Document ADXL345  accelerometer binding Rob Herring <robh@kernel.org> - 2017-02-28 02:30 +0100

csiph-web