Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1583235
| From | Andy Shevchenko <andy.shevchenko@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high |
| Date | 2017-02-17 10:30 +0100 |
| Message-ID | <tbN1w-2tF-7@gated-at.bofh.it> (permalink) |
| References | <tbMRQ-2p0-13@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Fri, Feb 17, 2017 at 11:12 AM, Phil Reid <preid@electromag.com.au> wrote: > When a threaded irq handler is chained attached to one of the gpio > pins when configure for level irq the altera_gpio_irq_leveL_high_handler > does not mask the interrupt while being handled by the chained irq. > This resulting in the threaded irq not getting enough cycles to complete > quickly enough before the irq was disabled as faulty. > It looks like handle_level_irq should be used in this situation > instead of handle_simple_irq. > @@ -310,7 +310,8 @@ static int altera_gpio_probe(struct platform_device *pdev) > altera_gc->interrupt_trigger = reg; > > ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0, > - handle_simple_irq, IRQ_TYPE_NONE); > + altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ? > + handle_level_irq : handle_simple_irq, IRQ_TYPE_NONE); AFAIK, handle_bad_irq() should be used here. -- With Best Regards, Andy Shevchenko
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high Phil Reid <preid@electromag.com.au> - 2017-02-17 10:20 +0100
Re: [PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-02-17 10:30 +0100
Re: [PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-02-17 12:50 +0100
Re: [PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high Phil Reid <preid@electromag.com.au> - 2017-02-17 12:50 +0100
Re: [PATCH 1/1] gpio: altera: Use handle_level_irq when configured as a level_high Linus Walleij <linus.walleij@linaro.org> - 2017-02-23 16:00 +0100
csiph-web