Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1678690

Early loading of microcode updates with all firmware

Show all headers | View raw

Dear Borislav,


Thank you for recently updating the document *Early load microcode* [1].

My goal is to include all microcode updates from AMD and Intel, as the 
image is supposed to run on several systems.

Therefore, I included the files in the initramfs image, under 
`/lib/firmware`, and selected the microcode related Kconfig options.

```
$ grep MICROCODE /boot/config-4.11.7.mx64.161
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
```

But, the microcode is not updated. For example, I have to manually run 
the command below.

```
$ echo 1 | sudo tee /sys/devices/system/cpu/microcode/reload
```

Reading the document, that method is not explicitly mentioned there, so 
I guess it’s not supported.

So two question. If I want to add it to the initramfs image, the 
document says to prepend the updates. But I am unclear how to create 
`microcode.bin` to contain all the files in 
`/lib/firmware/intel-ucode/`, and then the ones for AMD devices. Do I 
just concatenate both?

Regarding the section *Builtin microcode*, it would be quite cumbersome 
to list all the microcode files. It looks like wildcards like `*` are 
not supported. At least the build breaks, if `intel-ucode/*` is used in 
the prompt.


Kind regards,

Paul


[1] https://www.kernel.org/doc/Documentation/x86/early-microcode.txt

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Early loading of microcode updates with all firmware Paul Menzel <pmenzel@molgen.mpg.de> - 2017-06-30 12:50 +0200
  Re: Early loading of microcode updates with all firmware Borislav Petkov <bp@alien8.de> - 2017-06-30 13:40 +0200
    Re: Early loading of microcode updates with all firmware Paul Menzel <pmenzel@molgen.mpg.de> - 2017-06-30 17:50 +0200

csiph-web