[RFC PATCH 2/2] mmc: sdhci-msm: enable SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER

From	srinivas.kandagatla@linaro.org
Newsgroups	linux.kernel
Subject	[RFC PATCH 2/2] mmc: sdhci-msm: enable SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER
Date	2017-06-28 15:40 +0200
Message-ID	<tXlmi-7nt-21@gated-at.bofh.it> (permalink)
References	<tXlmh-7nt-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Programming legacy HOST SDMA Buffer Boundary bits in Block Size Register
(0x04) is not supported in Qualcomm sdhci controllers. Writing to this
would cause the controller not to transfer last block in case block size
is 4 bytes or less.

This issue was noticed while testing sdio wlan card on Qcom DB410c board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/host/sdhci-msm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 9d601dc0d646..50f650301ae6 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1114,7 +1114,8 @@ static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 		  SDHCI_QUIRK_NO_CARD_NO_RESET |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER,
 	.ops = &sdhci_msm_ops,
 };
 
-- 
2.11.0

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[RFC PATCH 2/2] mmc: sdhci-msm: enable SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER srinivas.kandagatla@linaro.org - 2017-06-28 15:40 +0200

csiph-web