Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1643876
| From | Lee Jones <lee.jones@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver |
| Date | 2017-05-18 09:00 +0200 |
| Message-ID | <tInzH-6pb-3@gated-at.bofh.it> (permalink) |
| References | <tH2dX-2fX-1@gated-at.bofh.it> <tH2dX-2fX-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Sun, 14 May 2017, Valentin Sitdikov wrote:
> This patch adds documentation for the max7360 bindings.
> The max7360 is multifunctional device containing gpio,
> keypad, pwm and rotary encoder submodules.
>
> Signed-off-by: Valentin Sitdikov <valentin_sitdikov@mentor.com>
> Signed-off-by: Andrei Dranitca <Andrei_Dranitca@mentor.com>
> ---
> Documentation/devicetree/bindings/mfd/max7360.txt | 72 +++++++++++++++++++++++
> max7360.txt | 72 +++++++++++++++++++++++
I think you need to re-roll this patch.
> 2 files changed, 144 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max7360.txt
> create mode 100644 max7360.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/max7360.txt b/Documentation/devicetree/bindings/mfd/max7360.txt
> new file mode 100644
> index 0000000..fd83227
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max7360.txt
> @@ -0,0 +1,72 @@
> +* Maxim MAX7360 multi-function device
> +
> +The Maxim MAX7360 is a multifunction device which includes
> +64 key switches, eight LED drivers/GPIOs, PWM intensity control,
> +and rotary switch control.
> +
> +Required properties:
> +- compatible: Should be the following: "maxim,max7360"
> +- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
> +
> +Optional properties:
> +- interrupt-parent: Specifies the phandle of the interrupt controller to which
> + the interrupts from MAX7360 are routed to.
> +- interrupt-names: list of "inti" and "intk"
> +- interrupt-controller: Identifies the device as an interrupt controller.
> +- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
> +
> +Examples:
> +
> +Without subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>, <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "inti", "intk";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + };
> +
> +With subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "int-shared";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + gpio {
> + compatible = "maxim,max7360-gpio";
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <0>;
> + };
> +
> + keypad {
> + compatible = "maxim,max7360-keypad";
> + maxim,debounce_reg = /bits/ 8 <0xef>;
> + maxim,ports_reg = /bits/ 8 <0xae>;
> + linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
> + MATRIX_KEY(1, 0, KEY_F4) >;
> + keypad,num-rows = <2>;
> + keypad,num-columns = <1>;
> + interrupts = <1>;
> + };
> +
> + pwm {
> + compatible = "maxim,max7360-pwm";
> + #pwm-cells = <0x2>;
> + };
> +
> + rotary_encoder {
> + compatible = "maxim,max7360-rotary";
> + interrupts = <2>;
> + };
> +
> + };
> diff --git a/max7360.txt b/max7360.txt
> new file mode 100644
> index 0000000..359073a
> --- /dev/null
> +++ b/max7360.txt
> @@ -0,0 +1,72 @@
> +* Maxim MAX7360 multi-function device
> +
> +The Maxim MAX7360 is a multifunction device which includes
> +64 key switches, eight LED drivers/GPIOs, PWM intensity control,
> +and rotary switch control.
> +
> +Required properties:
> +- compatible: Should be the following: "maxim,max7360"
> +- reg: Specifies the i2c slave address of the max7360 block. It can be 0x38, 0x3a, 0x3c or 0x3e IIUC.
> +
> +Optional properties:
> +- interrupt-parent: Specifies the phandle of the interrupt controller to which
> + the interrupts from MAX7360 are routed to.
> +- interrupt-names: might be "int-shared" or list of "inti" and "intk"
> +- interrupt-controller: Identifies the device as an interrupt controller.
> +- #interrupt-cells : Number of cells to encode an interrupt source, shall be 1.
> +
> +Examples:
> +
> +Without subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "int-shared";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + };
> +
> +With subnodes:
> + max7360@38 {
> + compatible = "maxim,max7360";
> + reg = <0x38>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "int-shared";
> + interrupt-controller;
> + #interrupt-cells = <0x1>;
> +
> + max7360_gpio: max7360_gpio@0 {
> + compatible = "maxim,max7360-gpio";
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + interrupts = <0>;
> + };
> +
> + max7360_keypad {
> + compatible = "maxim,max7360-keypad";
> + maxim,debounce_reg = /bits/ 8 <0xef>;
> + maxim,ports_reg = /bits/ 8 <0xae>;
> + linux,keymap = < MATRIX_KEY(0, 0, KEY_F5)
> + MATRIX_KEY(1, 0, KEY_F4) >;
> + keypad,num-rows = <2>;
> + keypad,num-columns = <1>;
> + interrupts = <1>;
> + };
> +
> + max7360_pwm: max7360_pwm {
> + compatible = "maxim,max7360-pwm";
> + #pwm-cells = <0x2>;
> + };
> +
> + max7360_rotary_encoder {
> + compatible = "maxim,max7360-rotary";
> + interrupts = <2>;
> + };
> +
> + };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 0/2] dt-bindings: mfd: Add max7360 mfd driver and DT documentation Valentin Sitdikov <valentin_sitdikov@mentor.com> - 2017-05-14 16:00 +0200
[PATCH v2 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Valentin Sitdikov <valentin_sitdikov@mentor.com> - 2017-05-14 16:00 +0200
Re: [PATCH v2 1/2] dt-bindings: mfd: Add DT bindings documentation for the max7360 mfd driver Lee Jones <lee.jones@linaro.org> - 2017-05-18 09:00 +0200
[PATCH v2 2/2] mfd: max7360: Add mfd core device driver Valentin Sitdikov <valentin_sitdikov@mentor.com> - 2017-05-14 16:00 +0200
csiph-web