Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1643841

Re: [PATCH 1/2] mtd: nand: add generic helpers to check, match, maximize ECC settings

Show all headers | View raw

Hi Boris,



2017-05-15 20:54 GMT+09:00 Boris Brezillon <boris.brezillon@free-electrons.com>:
> Hi Masahiro,
>
> Sorry for the late reply.
>
> On Mon, 8 May 2017 12:40:47 +0900
> Masahiro Yamada <yamada.masahiro@socionext.com> wrote:
>
>> Hi Boris,
>>
>>
>> 2017-04-29 1:32 GMT+09:00 Boris Brezillon <boris.brezillon@free-electrons.com>:
>>
>> >> +     for (setting = caps->ecc_settings; setting->step; setting++) {
>> >> +             /* If chip->ecc.size is already set, respect it. */
>> >> +             if (chip->ecc.size && setting->step != chip->ecc.size)
>> >> +                     continue;
>> >> +
>> >> +             /* If chip->ecc.strength is already set, respect it. */
>> >> +             if (chip->ecc.strength &&
>> >> +                 setting->strength != chip->ecc.strength)
>> >> +                     continue;
>> >
>> > Hm, I don't get it. If chip->ecc.strength and chip->ecc.size are
>> > explicitly set, you should just call nand_check_ecc_caps() and skip
>> > nand_try_to_match_ecc_req(). Why would you call
>> > nand_try_to_match_ecc_req() in this case?
>>
>>
>> I want to call this function if
>> ecc.size is specified but ecc.strength is not
>> (or vice versa).
>
> That's not a valid combination. I accepted the case where
> nand-ecc-step-size is not defined in the DT just because sometime you
> only have one possible setting which is imposed by the controller. In
> this case ecc.size should be explicitly set by the driver not left to 0.
>
>>
>>
>> If both ecc.size and ecc.strength are already specified,
>> you are right, no need to call this function.
>> This function can check the sanity of the specified
>> combination of (step, strength), but this is the same
>> as what nand_check_ecc_caps() does.


I am working on the next version because I really need to
merge all of my Denali controller patches for my SoCs.


One question about this part.


       /* If chip->ecc.size is already set, respect it. */
       if (chip->ecc.size && step_size != chip->ecc.size)
               continue;

Does this make sense for nand_try_to_maximize_ecc()?

(In other words, can nand-ecc-maximize stand together with nand-ecc-step-size?)


-- 
Best Regards
Masahiro Yamada

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 1/2] mtd: nand: add generic helpers to check, match,  maximize ECC settings Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-05-15 14:00 +0200
  Re: [PATCH 1/2] mtd: nand: add generic helpers to check, match,  maximize ECC settings Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-05-18 08:30 +0200
    Re: [PATCH 1/2] mtd: nand: add generic helpers to check, match,  maximize ECC settings Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-05-18 09:20 +0200
      Re: [PATCH 1/2] mtd: nand: add generic helpers to check, match,  maximize ECC settings Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-05-24 10:30 +0200

csiph-web