Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1641665

Re: [PATCH v4 3/3] hwmon: (adt7475) add high frequency support

Show all headers | View raw

On 05/14/2017 06:30 PM, Chris Packham wrote:
> Systems using 4-wire fans usually require high frequency (22.5kHz)
> output on the pwm. Add 22500 as a valid option in the pwmfreq_table. In
> high frequency mode the low-order bit are ignored so they can safely be
> set to 0.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> Changes in v3:
> - New
> Changes in v4:
> - Fix pwmfreq_table array indexing
>
>  drivers/hwmon/adt7475.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 3056076fae27..1baa213a60bd 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -934,7 +934,7 @@ static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
>
>  /* List of frequencies for the PWM */
>  static const int pwmfreq_table[] = {
> -	11, 14, 22, 29, 35, 44, 58, 88
> +	11, 14, 22, 29, 35, 44, 58, 88, 22500
>  };
>
>  static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
> @@ -942,9 +942,10 @@ static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
>  {
>  	struct adt7475_data *data = adt7475_update_device(dev);
>  	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	int i = clamp_val(data->range[sattr->index] & 0xf, 0,
> +			  ARRAY_SIZE(pwmfreq_table) - 1);
>
> -	return sprintf(buf, "%d\n",
> -		       pwmfreq_table[data->range[sattr->index] & 7]);
> +	return sprintf(buf, "%d\n", pwmfreq_table[i]);
>  }
>
>  static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
> @@ -965,7 +966,7 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
>
>  	data->range[sattr->index] =
>  		adt7475_read(TEMP_TRANGE_REG(sattr->index));
> -	data->range[sattr->index] &= ~7;
> +	data->range[sattr->index] &= ~0xf;
>  	data->range[sattr->index] |= out;
>
>  	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
>

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 3/3] hwmon: (adt7475) add high frequency support Chris Packham <chris.packham@alliedtelesis.co.nz> - 2017-05-15 03:40 +0200
  Re: [PATCH v4 3/3] hwmon: (adt7475) add high frequency support Guenter Roeck <linux@roeck-us.net> - 2017-05-15 15:30 +0200
    Re: [PATCH v4 3/3] hwmon: (adt7475) add high frequency support Chris Packham <Chris.Packham@alliedtelesis.co.nz> - 2017-05-15 23:10 +0200

csiph-web