Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1576132

Re: [PATCH 2/7] serial: exar: Fix initialization of EXAR registers for ports > 0

Show all headers | View raw

On Tue, Feb 7, 2017 at 6:09 PM, Jan Kiszka <jan.kiszka@siemens.com> wrote:
> So far, pci_xr17v35x_setup always initialized 8XMODE, FCTR & Co. for
> port 0 because it used the address of that port instead of moving the
> pointer according to the port number. Fix this and remove the unneeded
> temporary ioremap by moving default_setup up and reusing the membase it
> fills into the port structure.

FWIW:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

One minor question below.

>
> Fixes: 14faa8cce88e ("tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards")
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>  drivers/tty/serial/8250/8250_exar.c | 19 ++++++++-----------
>  1 file changed, 8 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 58469d9..d3e3a7d 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -157,27 +157,24 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
>         if (board->has_slave && idx >= 8)
>                 port->port.uartclk /= 2;
>
> -       p = pci_ioremap_bar(pcidev, 0);
> -       if (!p)
> -               return -ENOMEM;
> +       ret = default_setup(priv, pcidev, idx, offset, port);
> +       if (ret)
> +               return ret;
>
> -       /* Setup Multipurpose Input/Output pins. */
> -       if (idx == 0)
> -               setup_gpio(p);
> +       p = port->port.membase;
>
>         writeb(0x00, p + UART_EXAR_8XMODE);
>         writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
>         writeb(128, p + UART_EXAR_TXTRG);
>         writeb(128, p + UART_EXAR_RXTRG);
> -       iounmap(p);
>
> -       ret = default_setup(priv, pcidev, idx, offset, port);
> -       if (ret)
> -               return ret;
> +       if (idx == 0) {
> +               /* Setup Multipurpose Input/Output pins. */
> +               setup_gpio(p);
>
> -       if (idx == 0)

>                 port->port.private_data =
>                         xr17v35x_register_gpio(pcidev);

Can we do this on one line?

> +       }
>
>         return 0;
>  }
> --
> 2.1.4
>



-- 
With Best Regards,
Andy Shevchenko

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 2/7] serial: exar: Fix initialization of EXAR registers for ports > 0 Jan Kiszka <jan.kiszka@siemens.com> - 2017-02-07 17:20 +0100
  Re: [PATCH 2/7] serial: exar: Fix initialization of EXAR registers  for ports > 0 Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-02-07 23:50 +0100

csiph-web