Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1514899

Re: [PATCH v4] media: et8ek8: add device tree binding documentation

From Sakari Ailus <sakari.ailus@iki.fi>
Newsgroups linux.kernel
Subject Re: [PATCH v4] media: et8ek8: add device tree binding documentation
Date 2016-11-03 23:30 +0100
Message-ID <szyGe-1ul-23@gated-at.bofh.it> (permalink)
References <svwtj-4Yk-13@gated-at.bofh.it> <sy5dg-16O-19@gated-at.bofh.it> <szpCV-3Ud-1@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi Pavel and Rob,

On Thu, Nov 03, 2016 at 01:47:49PM +0100, Pavel Machek wrote:
> Hi!
> 
> > > +Mandatory properties
> > > +--------------------
> > > +
> > > +- compatible: "toshiba,et8ek8"
> > > +- reg: I2C address (0x3e, or an alternative address)
> > > +- vana-supply: Analogue voltage supply (VANA), 2.8 volts
> > > +- clocks: External clock to the sensor
> > > +- clock-frequency: Frequency of the external clock to the sensor. Camera
> > > +  driver will set this frequency on the external clock.
> > 
> > This is fine if the frequency is fixed (e.g. an oscillator), but you 
> > should use the clock binding if clocks are programable.
> 
> It is fixed. So I assume this can stay as is? Or do you want me to add
> "The clock frequency is a pre-determined frequency known to be
> suitable to the board." as Sakari suggests?
> 
> > > +- reset-gpios: XSHUTDOWN GPIO
> > 
> > Please state what the active polarity is.
> 
> As in "This gpio will be set to 1 when the chip is powered." ?

How about:

"The XSHUTDOWN signal is active high. The sensor is in hardware standby
mode when the signal is in low state."

These bindings start looking more precise than the smiapp ones. :-)

-- 
Sakari Ailus
e-mail: sakari.ailus@iki.fi	XMPP: sailus@retiisi.org.uk

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

Re: [PATCH v4] media: et8ek8: add device tree binding documentation Rob Herring <robh@kernel.org> - 2016-10-30 21:50 +0100
  Re: [PATCH v4] media: et8ek8: add device tree binding documentation Sakari Ailus <sakari.ailus@iki.fi> - 2016-10-31 23:50 +0100
  Re: [PATCH v4] media: et8ek8: add device tree binding documentation Pavel Machek <pavel@ucw.cz> - 2016-11-03 13:50 +0100
    Re: [PATCH v4] media: et8ek8: add device tree binding documentation Sakari Ailus <sakari.ailus@iki.fi> - 2016-11-03 23:30 +0100
      Re: [PATCH v4] media: et8ek8: add device tree binding documentation Pavel Machek <pavel@ucw.cz> - 2016-11-07 11:40 +0100
  [PATCH v5] media: et8ek8: add device tree binding documentation Pavel Machek <pavel@ucw.cz> - 2016-11-07 11:50 +0100
    Re: [PATCH v5] media: et8ek8: add device tree binding documentation Pavel Machek <pavel@ucw.cz> - 2016-11-11 13:20 +0100

csiph-web