Re: [PATCH] extcon: usb-gpio: Add VBUS detection support

From	Chanwoo Choi <cw00.choi@samsung.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH] extcon: usb-gpio: Add VBUS detection support
Date	2016-10-19 17:00 +0200
Message-ID	<su0vy-2D0-87@gated-at.bofh.it> (permalink)
References	<sjuGB-4nM-3@gated-at.bofh.it> <slTrb-5Aj-3@gated-at.bofh.it> <su0vy-2D0-89@gated-at.bofh.it> <spztT-6CE-1@gated-at.bofh.it>
Organization	Samsung Electronics

Show all headers | View raw

Hi Roger,

On 2016년 10월 07일 18:18, Roger Quadros wrote:
> Hi Chanwoo,
> 
> 
> On 27/09/16 08:48, Peter Chen wrote:
>> On Tue, Sep 20, 2016 at 05:53:55PM +0300, Roger Quadros wrote:
>>> Driver can now work with both ID and VBUS pins or either one of
>>> them.
>>>
>>> There can be the following 3 cases
>>>
>>> 1) Both ID and VBUS GPIOs are available:
>>>
>>> ID = LOW -> USB_HOST active, USB inactive
>>> ID = HIGH -> USB_HOST inactive, USB state is same as VBUS.
>>>
>>> 2) Only ID GPIO is available:
>>>
>>> ID = LOW -> USB_HOST active, USB inactive
>>> ID = HIGH -> USB_HOST inactive, USB active
>>>
>>> 3) Only VBUS GPIO is available:
>>>
>>> VBUS = LOW -> USB_HOST inactive, USB inactive
>>> VBUS = HIGH -> USB_HOST inactive, USB active
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
> 
> Can you please pick this one for v4.9? Thanks.

Applied it.

Best Regards,
Chanwoo Choi

[snip]

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH] extcon: usb-gpio: Add VBUS detection support Chanwoo Choi <cw00.choi@samsung.com> - 2016-10-19 17:00 +0200

csiph-web