Re: [PATCH 1/2] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support

From	Fabio Estevam <festevam@gmail.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 1/2] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
Date	2016-09-09 23:00 +0200
Message-ID	<sfB3Y-7LQ-29@gated-at.bofh.it> (permalink)
References	<sfAKB-7F8-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Fri, Sep 9, 2016 at 5:35 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:

> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-icore.dtsi"
> +
> +/ {
> +       model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
> +       compatible = "fsl,imx6-icore", "fsl,imx6q";

Should be:
 compatible = "engicam,imx6-icore", "fsl,imx6q";

You could also send a patch adding engicam entry to
Documentation/devicetree/bindings/vendor-prefixes.txt

> +};
> +
> +&can1 {
> +       status = "oaky";

Should be "okay"

> +};
> +
> +&can2 {
> +       status = "oaky";

Should be "okay"

> +&iomuxc {
> +       pinctrl_flexcan1: flexcan1grp {
> +               fsl,pins = <
> +                       MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
> +                       MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000

No 0x80000000, please. Use the real IOMUX register value instead.


> +               >;
> +       };
> +
> +       pinctrl_flexcan2: flexcan2grp {
> +               fsl,pins = <
> +                       MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
> +                       MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000

Same here.

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support Jagan Teki <jagannadh.teki@gmail.com> - 2016-09-09 22:40 +0200
  Re: [PATCH 1/2] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Fabio Estevam <festevam@gmail.com> - 2016-09-09 23:00 +0200

csiph-web