Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1471132
| From | Chen-Yu Tsai <wens@csie.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 7/8] ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators |
| Date | 2016-08-27 11:00 +0200 |
| Message-ID | <saHD3-2mf-13@gated-at.bofh.it> (permalink) |
| References | <saHD3-2mf-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The AXP806 PMIC is the secondary PMIC. It provides various supply
voltages for the SoC and other peripherals. The PMIC's interrupt
line is connected to NMI pin of the SoC.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
Changes since v1:
- Fixed up bldo* voltage constraints to match regulator voltage step.
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 112 ++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 910b29f0f0b5..439847acd41e 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -260,6 +260,118 @@
};
};
+ axp806: pmic@745 {
+ compatible = "x-powers,axp806";
+ reg = <0x745>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ bldoin-supply = <®_dcdce>;
+
+ regulators {
+ reg_s_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
+
+ aldo2 {
+ /*
+ * unused, but use a different name to
+ * avoid name clash with axp809's aldo's
+ */
+ regulator-name = "s_aldo2";
+ };
+
+ aldo3 {
+ /*
+ * unused, but use a different name to
+ * avoid name clash with axp809's aldo's
+ */
+ regulator-name = "s_aldo3";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-name = "vcc18-efuse-adc-display-csi";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-name =
+ "vdd18-drampll-vcc18-pll-cpvdd";
+ };
+
+ bldo3 {
+ /* unused */
+ };
+
+ reg_bldo4: bldo4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vcc12-hsic";
+ };
+
+ reg_cldo1: cldo1 {
+ /*
+ * This was 3V in the original design, but
+ * 3.3V is the recommended supply voltage
+ * for the Ethernet PHY.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-gmac-phy";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "afvcc-cam";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-io-wifi-codec-io2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpub";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-vpu";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-name = "vcc-bldo-codec-ldoin";
+ };
+
+ sw {
+ /*
+ * unused, but use a different name to
+ * avoid name clash with axp809's sw
+ */
+ regulator-name = "s_sw";
+ };
+ };
+ };
+
ac100: codec@e89 {
compatible = "x-powers,ac100";
reg = <0xe89>;
--
2.9.3
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 0/8] mfd: axp20x: Add support for AXP806 PMIC Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
[PATCH v2 2/8] mfd: axp20x: Add support for AXP806 PMIC Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
Re: [PATCH v2 2/8] mfd: axp20x: Add support for AXP806 PMIC Lee Jones <lee.jones@linaro.org> - 2016-08-31 14:20 +0200
[PATCH v2 7/8] ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
[PATCH v2 3/8] regulator: axp20x: support AXP806 variant Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
Re: [PATCH v2 3/8] regulator: axp20x: support AXP806 variant Mark Brown <broonie@kernel.org> - 2016-09-01 23:10 +0200
Re: [PATCH v2 3/8] regulator: axp20x: support AXP806 variant Chen-Yu Tsai <wens@csie.org> - 2016-09-06 06:10 +0200
Re: [PATCH v2 3/8] regulator: axp20x: support AXP806 variant Lee Jones <lee.jones@linaro.org> - 2016-09-06 10:20 +0200
[PATCH v2 4/8] ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
[PATCH v2 1/8] mfd: axp20x: Add bindings for AXP806 PMIC Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
Re: [PATCH v2 1/8] mfd: axp20x: Add bindings for AXP806 PMIC Lee Jones <lee.jones@linaro.org> - 2016-08-31 14:20 +0200
[PATCH v2 6/8] ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators Chen-Yu Tsai <wens@csie.org> - 2016-08-27 11:00 +0200
csiph-web