[PATCH 0/3] Input: add optional enable gpio to pwm-beeper

From	David Lechner <david@lechnology.com>
Newsgroups	linux.kernel
Subject	[PATCH 0/3] Input: add optional enable gpio to pwm-beeper
Date	2017-01-06 03:50 +0100
Message-ID	<sWsLn-3qX-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

This series adds an optional enable gpio to the pwm-beeper driver. This is for
cases when the beeper needs to be "enabled", for example, if there is an
amplifier that drives the speaker that is not always on.

David Lechner (3):
  Input: pwm-beeper: suppress error message on probe defer
  dt-bindings: Input: Add enable-gpios to pwm-beeper
  Input: pwm-beeper: add optional enable gpio

 .../devicetree/bindings/input/pwm-beeper.txt       | 11 +++++++++
 drivers/input/misc/pwm-beeper.c                    | 27 ++++++++++++++++++----
 2 files changed, 34 insertions(+), 4 deletions(-)

-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/3] Input: add optional enable gpio to pwm-beeper David Lechner <david@lechnology.com> - 2017-01-06 03:50 +0100
  [PATCH 3/3] Input: pwm-beeper: add optional enable gpio David Lechner <david@lechnology.com> - 2017-01-06 03:50 +0100
    Re: [PATCH 3/3] Input: pwm-beeper: add optional enable gpio Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-01-06 18:30 +0100
      Re: [PATCH 3/3] Input: pwm-beeper: add optional enable gpio David Lechner <david@lechnology.com> - 2017-01-06 18:50 +0100

csiph-web