Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1540995

RE: [PATCH v4 3/5] i2c: designware: Add slave definitions

Show all headers | View raw

The controller for i2c-designware cannot be slave/master at the same time and it has to be enabled knowing beforehand if we want it to be slave or master by something outside of the controller itself.

I as looking and I see the use of this I2C_OWN_SLAVE_ADDRESS with the "linux,slave-24c02" slave interface  but I am not seeing how it will help me identify a selected i2c-designware block as a "slave" device before instantiation. I'm sorry if I'm not understanding properly.
I use the "linux,slave-24c02" to instantiate the i2c-designware as a slave with an address so I can do write/read operations, it is how I tested it. 

Luis

-----Original Message-----
From: Rob Herring [mailto:robh@kernel.org] 
Sent: Monday, December 12, 2016 23:16
To: Luis de Oliveira <Luis.Oliveira@synopsys.com>
Cc: wsa@the-dreams.de; mark.rutland@arm.com; jarkko.nikula@linux.intel.com; andriy.shevchenko@linux.intel.com; mika.westerberg@linux.intel.com; linux-i2c@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Ramiro.Oliveira@synopsys.com; Joao.Pinto@synopsys.com; CARLOS.PALMINHA@synopsys.com
Subject: Re: [PATCH v4 3/5] i2c: designware: Add slave definitions

On Mon, Dec 12, 2016 at 12:35 PM, Luis de Oliveira <Luis.Oliveira@synopsys.com> wrote:
> Hi all,

Please don't top post.

>
> The slave address could be set by the I2C slave backend so I can't use it to setup the controller.
> A boolean property was my initial approach then Andy and Wolfram Sang suggested the use of compatible strings and later It was suggested to use a property to select mode but I can do it again if it's the best way.
> Can you please tell me where should it be documented?

bindings/i2c/i2c.txt.

Actually, looking at this some more, we already have a way to describe the controller being a slave device with the I2C_OWN_SLAVE_ADDRESS flag in the reg property. We should just need a helper to read reg property of each child and check for the bit set.

Rob

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v4 3/5] i2c: designware: Add slave definitions Rob Herring <robh@kernel.org> - 2016-12-12 18:10 +0100
  RE: [PATCH v4 3/5] i2c: designware: Add slave definitions Luis de Oliveira <Luis.Oliveira@synopsys.com> - 2016-12-12 19:40 +0100
    Re: [PATCH v4 3/5] i2c: designware: Add slave definitions Rob Herring <robh@kernel.org> - 2016-12-13 00:20 +0100
      RE: [PATCH v4 3/5] i2c: designware: Add slave definitions Luis de Oliveira <Luis.Oliveira@synopsys.com> - 2016-12-13 12:10 +0100
        Re: [PATCH v4 3/5] i2c: designware: Add slave definitions Rob Herring <robh@kernel.org> - 2016-12-13 15:20 +0100
          Re: [PATCH v4 3/5] i2c: designware: Add slave definitions Luis Oliveira <Luis.Oliveira@synopsys.com> - 2016-12-22 16:10 +0100
            Re: [PATCH v4 3/5] i2c: designware: Add slave definitions Andy Shevchenko <andriy.shevchenko@linux.intel.com> - 2016-12-22 16:40 +0100

csiph-web